Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.1 Cr
EMD Value
₹1.1 L
Closing Date
22 Sept 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Main Gate, Compound Wall painting/cladding, Road Work, External Lighting, External Water Supply & Drainage, External Rain Water Disposal, Horticulture & Landscaping, Bore well & Pumps inside MCL Guest House Campus, Gadakana,Bhubaneswar
NBCC/SBG-O/MCLGH/Engg/BZ/06/2022
NBCC/SBG-O/MCLGH/Engg/BZ/06/2022
Open Tender-Domestic
Civil Works General
Khordha, Odisha
₹11,800
₹1.1 L
22 Sept 2022
10 Sept 2022
22 Sept 2022
22 Sept 2022
17 Feb 2023
02_BOQ_MCL GH_06_2022
BILL OF QUANTITY
Sl No. Unit Quantity Rate Amount
1 MAIN GATE & COMPOUND WALL
Earth work in excavation by mechanical means (Hydraulic excavator) / manual
means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on
plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m,
disposed earth to be levelled and neatly dressed.
All kinds of soil cum 50.52 146.50 7401.18
Filling available excavated earth (excluding rock) in trenches, plinth, sides of cum 35.00 101.50 3552.50
foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited
layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Supplying and filling in plinth with Jamuna sand under floors including, cum 20.90 843.65 17632.29
watering, ramming consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level :
1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 10.50 3920.65 41166.83
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass sqm 286.50 186.40 53403.60
Floors, roof slabs, landings etc. sqm 122.00 371.80 45359.60
Columns, Lintels, beams, plinth beams, girders, bressumers and cantilevers, sqm 280.00 309.80 86744.00
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing
in position and binding all complete upto plinth level and above plinth level..
Thermo-Mechanically Treated bars kilogram 6200.00 66.50 412300.00
Providing and laying in position machine batched and machine mixed design mix M-
25 grade cement concrete for reinforced cement concrete work, using cement
content as per approved design mix, including pumping of concrete to site of laying
but excluding the cost of centering, shuttering, finishing and reinforcement, including
admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less
cement used as per design mix is payable/recoverable separately).
All works above plinth level upto floor V level cum 31.58 6353.00 200627.74
Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894-
2002, class designation 10 average compressive strength in super structure above
plinth level up to floor V level in :
Cement mortar 1:6 (1 cement : 6 Coarse sand) cum 18.50 5124.05 94794.93
12mm cement plaster of mix :
15 mm cement plaster on the rough side of single or half brick wall of mix :
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) sqm 85.25 120.35 10259.84
Providing and laying Vitrified tiles in different sizes (thickness to be specified by
manufacturer), with water absorption less than 0.08 % and conforming to I.S.
15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12
mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting
the joint with white cement & matching pigments etc. complete.
Providing and fixing aluminum work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl
plugs and screws or with fixing clips, or with expansion hold fasteners including
necessary filling up of gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, mitred
and jointed mechanically wherever required including cleat angle, Aluminum snap
beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-charge. (Glazing and
paneling to be paid for separately) :
For shutters of doors, windows & ventilators including providing and fixing hinges/
pivots and making provision for fixing of fittings wherever required including the cost
of PVC / neoprene gasket required (Fittings shall be paid for separately).
Powder coated aluminum (minimum thickness of powder coating 50 micron) kg 105.00 427.60 44898.00
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over sqm 1820.00 127.10 231322.00
and including priming coat of exterior primer applied @ 2.20kg/10 sqm.
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
Painting with synthetic enamel paint, having VOC (Volatile Organic Compound)
content less than 150 grams/ litre, of approved brand and manufacture, including
applying additional coats wherever required to achieve even shade and colour.
Applying priming coats with primer of approved brand and manufacture, having low
VOC (Volatile Organic Compound ) content.
With water thinnable cement primer on wall surface having VOC content less than 50 sqm 1820.00 31.55 57421.00
Wall painting with premium acrylic emulsion paint of interior grade, having VOC
(Volatile Organic Compound ) content less than 50 grams/ litre. Of Approved brand
and manufacture, including applying additional coats wherever required to achieve
even shade and colour.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm Point 10.00 727.00 7270.00
FRLS PVC insulated copper conductor single core cable in surface/ recessed medium
class PVC conduit with modular switch modular plate suitable GI box and earthing
the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable
etc.as required.
Wiring for twin light point with 1.5 sq.mm FR PVC insulated copper conductor single Point 4.00 782.00 3128.00
core cable in surface/ recessed medium class PVC conduit with 2 way modular switch
modular plate suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable etc.as required.
Wiring for power plug points with 2 x 4 sq.mm. FRLS PVC insulated, Cu. Conductor, Mtr. 4.00 171.00 684.00
single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4
sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as
Wiring for light plug points / power plug points with 4 x 4 sq.mm. FRLS PVC Mtr. 4.00 278.00 1112.00
insulated, Cu. Conductor, single core cable in surface/ recessed medium class PVC
conduit along with 2 Nos. 4 sq.mm. FRLS PVC insulated copper conductor single core
cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the follwing size of FRLS
PVC Insulated copper conductor, single core cable in surface/ recess medium class
PVC conduitas required.
2x 1.5 sqmm+ 1x 1.5 sqmm earth wire Mtr. 50.00 116.00 5800.00
2x 2.5 sqmm+ 1x 2.5 sqmm earth wire Mtr. 120.00 140.00 16800.00
Surface mounted compact flourescent Light fixture Philips Cat No. FCS 031 /2 x PL-L Nos. 4.00 1447.32 5789.28
11 watt CFL Lamp or approved equal in quality and design (for Toilet)
1200mm sweep 3 blade Ceiling fan complete with assembling of blades, down rod, No. 2.00 1468.32 2936.64
shackle insulator, canopy etc.
Designing, fabricating, testing, installing and fixing in position Curtain Wall with
Aluminium Composite Panel Cladding, with open grooves ............ lymer resin
coating of approved colour
and shade on face # 1 and polymer (Service) coating on face # 2 as specified using
stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer
c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot dip Galvanised Sqm 275.00 3696.65 1016578.75
with serrations and serrated washers to arrest the wind load movement, fasteners,
SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to
prevent bi-metallic... shop drawings and as directed by the Engineer-in-Charge.
However, for the purpose of payment, only the actual area on the external face of the
curtain wall with Aluminum Composite Panel Cladding (including width of
groove) shall be measured in sqm. up to two decimal places.
Providing and fixing 18mm thick Granite stone work for wall lining at all height in Sqm 52.00 3469.20 180398.40
cement mortar 1:3 (1cement : 3 coarse sand) including pointing with white cement
mortor with an admixture of pigment to match the granite shade complete as per
direction of Engineer-in-charge.
SUB-TOTAL OF MAIN GATE & COMPOUND WALL 2618707.31
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from cum 212.00 6248.00 1324576.00
batching plant. The ready mixed concrete shall be laid and finished with screed board
vibrator , vacuum dewatering process and finally finished by floating, brooming with
wire brush etc. complete as per specifications and directions of Engineer-in-charge.
(The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement
used as per design mix is payable/ recoverable separately).
Extra for providing and mixing hardening compound of approved quality as per litre 448.20 46.45 20818.89
manufacturer's specification in cement concrete.
Providing & Fixing in position premoulded joint filler in expansion joint per cm 480.00 2.45 1176.00
Providing and laying in position bitumen hot sealing compound for expansion joints
16.46.1 Using grade 'A' sealing compound. per cm 480.00 1.90 912.00
SUB TOTAL OF ROAD_WORK 1347482.89
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
3 EXTERNAL LIGHTING
Supplying and Fixing of HAVELLS Jeta Linear 80W LED 6000K Flood Light for Building each 6.00 32618.00 195708.00
Façade Lighting
Supplying and Fixing of HAVELLS Jeta NEO 150W LED 6000K Flood Light for Building each 6.00 32618.00 195708.00
Façade Lighting
Supplying and Fixing of HAVELLS SPRING 6 35 Watt LED Post Top 5000K FOR Main each 4.00 19595.00 78380.00
Supplying and Fixing of HAVELLS Endura Citylinear Neo 24W LED Street Light 6000K each 32.00 5983.00 191456.00
Supplying and Fixing of HAVELLS Mushroom 16W LED Bollard 6000K for Garden, each 60.00 10371.00 622260.00
Pathway Lighting etc.
Supplying & Fixing of HITEC make MS Street Light Poles, with base dia of 100 mm, each 32.00 10852.00 347264.00
height of 4.00 mts and arm length of 1.00 mt.
SUB TOTAL OF EXTERNAL LIGHTING 1630776.00
4 EXTERNAL WATER SUPPLY & DRAINAGE
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and
refilling etc. (external work)
18.12.3 25mm dia nominal bore Mtr 10.00 238.95 2389.50
18.12.4 32mm dia nominal bore Mtr 10.00 274.60 2746.00
18.12.5 40mm dia nominal bore Mtr 226.00 327.15 73935.90
18.12.6 50mm dia nominal bore Mtr 318.00 392.50 124815.00
18.4 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of
approved quality.
18.40.3 25mm dia nominal bore Mtr 10.00 7.90 79.00
18.40.4 32mm dia nominal bore Mtr 10.00 9.35 93.50
18.40.5 40mm dia nominal bore Mtr 226.00 10.65 2406.90
18.40.6 50mm dia nominal bore Mtr 318.00 12.65 4022.70
18.32 Constructing brick masonry chamber 30x30x50cms inside with 1st class brick work in
cement mortar 1:5 (1 cement : 5 fine sand) for stop cock with CI surface box
100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix
(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal
size)necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10
graded stone aggregate 40mm nominal size) and inside plastering with cement
mortar 1:3 (1 cement 3 coarse sand) 12mm thick finished with a floating coat of neat
cement complete as per standard design. (For Garden Hydrant)
18.32.1 With FPS bricks (Class I) Each 25.00 1101.70 27542.50
18.33 Constructing masonry Chamber 60X60X75 cm, inside with 75 class designation brick
work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep
(inside) with channel lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4
graded stone sggregate 20 mm nominal size) necessary excavation foundation
concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm
thick finished with a floating coat of neat cement complete as per standard design:
18.34 Constructing masonry Chamber 90X90X100 cm, inside with 75 class designation brick
work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with C.I.
surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep
(inside) with channel lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4
graded stone sggregate 20 mm nominal size) necessary excavation foundation
concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal
size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm
thick finished with a floating coat of neat cement complete as per standard design:
18.60 Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 0.00
and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The
tail pieces if required will be paid separately):
18.12.8 80mm dia nominal bore Each 1.00 3087.95 3087.95
18.17 Providing and fixing gunmetal gate valve with CI wheel of approved quality (screwed
18.17.1 25mm nominal bore Each 20.00 427.80 8556.00
18.17.2 32 mm dia nominal bore Nos. 500.35
18.17.3 40 mm dia nominal bore Nos. 584.20
18.17.4 50 mm dia nominal bore Nos. 5.00 749.40 3747.00
18.17.5 65 mm dia nominal bore Nos. 2.00 1286.25 2572.50
18.17.6 80 mm dia nominal bore Nos. 0.00 1918.85
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
NS-3 Providing and laying of HDPE pipes confirming to IS: 4984 type PE-80 (6 kg/cm2)
including all fittings wherever required e.g., tees, bends of any degree, couplings,
adapters, plugs, unions etc. and jointing as manufacturer recommondation etc.
including necessary excavation and refilling complete in all respects. (For irrigation
water Supply main)
NS-4 Providing and fixing of cast iron double flanged butterfly valves (PN 16) complete with
2 nos. matching flanges, bolts, nuts, washers 3 mm thick insertion neoprene gasket
conforming to IS 13095.
NS-5 Providing and fixing M.S. puddle flanges fabricated out of 6 mm thick M.S. plate of
size 200 x 200mm plus dia of pipe of 750 mm long pipe pieces to R.C.C. water
tanks / R.C.C. walls. The entire fitting shall be hot dipped galvanised.
a) 50mm dia (4mm wall thickness) Each 5.00 954.24 4771.20
b) 65mm dia (4mm wall thickness) Each 5.00 1210.44 6052.20
d) 100mm dia (4mm wall thickness) Each 5.00 2215.92 11079.60
SUB TOTAL OF EXTERNAL WATER SUPPLY AND DRAINAGE 588318.43
5 EXTERNAL RAIN WATER DISPOSAL
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C.pipes with collars
jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine
sand) including testing of joints etc complete:
19.3 Providing and laying cement concrete 1:5:10 (1 cement:5coarse sand:10 graded
stone aggregate 40mm nominal size) up to haunches of pipes including bed
concrete as per standard design.
19.7 Constructing brick masonry manhole in cement mortar 1:4(1 cement : 4 coarse
sand)R.C.C.top slab with 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone
aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement: 4 coarse
sand: 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick
with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat
cement and making channels in cement concrete 1:2:4 mix (1 cement: 2 coarse
sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of
neat cement complete as per standard design:
19.7.1 Inside size 90x80 cm and 60 cm deep including C.I.cover with frame (light duty)
455x610 mm internal diameter, total weight of cover and frame to be not less than
38 kg (weight of cover 23kg and weight of frame 15 kg):
19.7.1.1 With F.P.S. bricks class designation 75 Each 5.00 8062.70 40313.50
19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement
mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C.
horizontal grating with frame complete as per standard design :
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 10.00 3774.95 37749.50
19.21 Making connection of drain or sewer line with existing manhole , including breaking
into & making good the walls ,floors with cement concrete 1:2:4 mix ( 1 cement :2
coarse sand :4 graded stone aggregate 20mm nominal size ) cement plastered on
both sides with cement mortar 1:3 ( 1 cement :3 coarse sand ) finished with floating
coat of neat cement & making necessary channels for the drain etc. complete.
For Pipes 350 to 450 mm diameter Each 3.00 574.10 1722.30
2.10 Excavating trenches of required width for pipes, cables etc. including excavation for
sockets and dressing of sides, ramming of bottom depth upto 1.5 M including getting
out the excavated soil(HARD OR SOFT) and then returning the soil as required in
layers not exceeding 20 cms in depth including consolidating each deposited layer by
ramming, watering etc. and disposing of surplus excavated soil as directed within a
lead of 50m. [hard/Dense soil]
2.10.1 All kind of soil
2.10.1.2 Pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia. Mtr 260.00 192.75 50115.00
NS-6 Providing all material & constructing brick masonary recharge pit of 4.0x3.5 x 3.5 m Nos. 2.00 375685.00 751370.00
depth with brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand) with
100mm dia weep holes at side walls @ 500 mm vertically & horizontally center to
center, 200 mm thick RCC top slab in cement concrete (1:2:4 ) along with periferial &
two nos. of intermediate RCC beams of size 250 x 450mm R/ F of slab 12 mm tor
steel at bottom and 10 mm at topwith a spacing of 125 mm c/c, 4 nos 16 mm tor
steel bars at bottom & 2 nos. 12 mm tor steel bars at top for beams with 8 mm
stirrups @ 150 mm c/c, 2 nos. heavy duty SFRC cover of 560 mm dia,poly propelene
coated rungs @ 300 mm c/c embeded in CC ( 1 : 2 : 4 ) blocks of 200 x 200 x 200
mm, 150 mm thick PCC in 1: 4 : 8 below footing with 150 mm projection, internal &
external plaster in CM 1 : 4, necessary excavation, backfilling & disposal of surplus
earth upto a lead of 50m complete in all respect including drilling percolation Bore
Hole of 200/250 mm dia upto 50 meter depth with reverse rotary method in all types
of soil including costs for mobilisation of Rig, including development of bore with 300-
400 cfm compressor and making good the area after completion of work. Contractor
shall arrange for all necessary tools,consumables and water required for drilling and
providing and fixing 160 mm OD UPVC perforated/partially plain pipe (6 Kg/cm.sq.) in
bore hole with cap at top of approved brand.( Item including of providing and laying
silt free coarse sand , pea gravels etc., in layers as per direction of engineer-in-
NS-7 Providing and constructing brick masonry desilting chamber of size Nos. 2.00 45764.00 91528.00
200x150xupto300 cms depth inside with 75 class designation brick work
345mm/230mm thick in cement mortar 1:4 (1cement:4 coarse sand) with weep
holes all around , SFRC cover heavy duty 560mm dia and 150 mm thick R.C.C. top
slab 1:2:4 mix(1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal
size) including necessary excavation, back filling, disposal of surplus earth as
directed, foundation concrete 1:5:10 mix (1 cement : 5 fine sand : 10 graded stone
aggregate 40mm nominal size) below masonry walls with 150mm projection at either
side including necessary baffle wall inside(as per std. drawing) , excavation,back
filling and disposal of surplus earth upto a lead of 200 mtr., poly propelene coated
rungs @ 300 mm c/c.
SUB TOTAL OF EXTERNAL RAIN WATER DISPOSAL 1127809.80
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
REFURBISHING OF MCL GUEST HOUSE, BHUBANESWAR - Horticulture and Landscaping.
BILL OF QUANTITY
Sl No. Item Particulars Unit Quantity Rate Amount
6 HORTICULTURE & LANDSCAPING 1314154.9
1.1.2 Carriage of good earth by mechanical transport including loading,
unloading and stacking
Trenching in ordinary soil up to a depth of 60 cm including removal cum 1000.00 39.77 39770.00
and stacking of serviceable materials and then disposing of surplus
soil, by spreading and neatly leveling within a lead of 50 m and
making up the trenched area to proper levels by filling with earth or
earth mixed with sludge or/and manure before and after flooding
trench with water (excluding cost of imported earth, sludge or
Supplying and stacking at site dump manure from approved source,
including carriage up to 1 km (manure measured in stacks will be
reduced by 8% for payment) :
Screened through sieve of I.S. designation 20 mm cum 200.00 179.67 35934.00
Fine dressing of the ground 100sqm 100.00 187.92 18792.00
Spreading of sludge, dump manure and / or good earth in required cum 1200.00 26.96 32352.00
thickness as per direction of Officer-in-charge (Cost of sludge, dump
manure and / or good earth to be paid separately).
Mixing earth and sludge or manure in the required proportion cum 1200.00 18.49 22188.00
specified or directed by the Officer-in-charge..
Grassing with selection No.1 grass including watering and
maintenance of the lawn for 30 days or more till the grass forms a
thick lawn, free from weeds and fit for mowing including supplying
good earth, if needed (the good earth if needed shall be paid for
In rows 5 cm apart in both directions 100 sqm 200.00 901.82 180364.00
With grass Turf 100 sqm 200.00 679.97 135994.00
Preparation of beds for hedging and shrubbery by excavating 60 cm cum 110.00 112.77 12404.70
deep and trenching the excavated base to a further depth of 30 cm,
refilling the excavated earth after breaking clods and mixing with
sludge or manure in the ratio of 8:1 (8 parts of stacked volume of
earth after reduction by 20% : one part of stacked volume of sludge
or manure after reduction by 8%), flooding with water, filling with
earth if necessary, watering and finally fine dressing, leveling etc.
including stacking and disposal of materials declared unserviceable
and surplus earth by spreading and leveling as directed, within a
lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or
extra earth to be paid for separately).
Digging holes in ordinary soil and refilling the same with the
excavated earth mixed with manure or sludge in the ratio of 2:1 by
volume (2 parts of stacked volume of earth after reduction by 20% :
1 part of stacked volume of manure after reduction by 8%) flooding
with water, dressing including removal of rubbish and surplus earth,
if any, with all leads and lifts (cost of manure, sludge or extra good
earth if needed to be paid for separately) :
Holes 1.2 m dia and 1.2 m deep. each 100.00 227.16 22716.00
Holes 90 cm dia, and 90 cm deep. each 50.00 97.44 4872.00
Holes 60 cm dia, and 60 cm deep. each 50.00 30.02 1501.00
Holes 45 cm dia, and 45 cm deep. each 300.00 13.02 3906.00
Preparation of mounds of various size and shape by available cum 200.00 231.12 46224.00
excavated / supplied earth in layers not exceeding 20 cm in depth,
breaking clods, watering of each layer, dressing etc., lead upto 50
meter and lift upto 1.5 m complete as per direction of Officer-in-
Providing Square Cement Concrete pots of specified size, cast with
cement concrete of nominal mix 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 60 mm nominal size), reinforced with 7
nos. ( 3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5
mm dia as per design, including required form work, finishing with
cement punning on exposed surface, curing for specified period and
stacking in required rows & height , all complete as per direction of
Officer-in-charge.
Top inner width 35 cm, outer bottom width 25 cm, total height 35 each 200.00 214.99 42998.00
cm and wall thickness 25.4 mm
Providing Circular Cement Concrete pots of specified size, cast with
cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4
graded stone aggregate 6 mm nominal size), reinforced with 7 nos (
3 nos horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5 mm
dia as per design, including required form work, finishing with
cement punning on exposed surface, curing for specified period and
stacking in required rows & height, all complete as per direction of
Officer-in-charge.
Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm each 300.00 178.22 53466.00
with wall thickness of 25.4 mm
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
Supply & Planting best quality trees inclusive of cultivation of trees
bead to required depth. All trees / plants to be approved before
planting including watering & maintenance for 180 days.
Alstonia Scholaris 'Milky pine' (1500-1800mm high) each 20.00 277.20 5544.00
Hibiscus Mutabilis-Chaneable Rose'confederate Rose' each 20.00 126.00 2520.00
Grevillea Robusta 'Silky Oak' each 8.00 168.00 1344.00
Bombax Ceiba ' Silky-Cotton Tree' each 5.00 223.44 1117.20
Furcraea gigantea ' mauritius hemp' each 10.00 756.00 7560.00
Michelia Champaca 'Golden Champa' each 10.00 302.40 3024.00
Melia azedarach ' Chinaberry' each 5.00 252.00 1260.00
Albizia Procera each 5.00 201.60 1008.00
Couroupita Guianensis each 10.00 302.40 3024.00
Kagelia Pinnata each 5.00 201.60 1008.00
Calliandra Haematocephala ' White Powderpuff' each 50.00 40.32 2016.00
Rhapis Excelsa ' Broadleaf Lady Palm Or Bamboo Palm' each 50.00 302.40 15120.00
Gardenia Jasminoides ' Cape-jasmine' each 50.00 201.60 10080.00
Russelia Equisetiformis 'Fire Cracker plant' sqm 50.00 448.56 22428.00
Ixora Chinensis 'dwarf Rangan' sqm 50.00 504.00 25200.00
Putranjiva Roxburghii 'Lucky Bean Tree' sqm 50.00 559.44 27972.00
Nerium Oleander 'Roseum' sqm 50.00 448.56 22428.00
Caesalpinia pulcherrima ' Dwaef Poinciana sqm 50.00 139.44 6972.00
Duranta repens sqm 50.00 403.20 20160.00
Clerodendrum Inerme sqm 50.00 403.20 20160.00
Lantana Cmara 'Depressa' sqm 50.00 403.20 20160.00
Bauhinia Galpinii each 50.00 201.60 10080.00
Wedelia Trilobata 'Yellow Dot' sqm 50.00 223.44 11172.00
Iresine Herbstii ' Blood Leaf Plant' sqm 50.00 403.20 20160.00
Cynodon dactylon ' Calcutta Grass' sqm 500.00 100.80 50400.00
paspalum Vaginatum 'paspalum Grass' sqm 50.00 145.32 7266.00
Jasminum pubescenes 'rubescens' sqm 50.00 403.20 20160.00
SUB TOTAL OF HORTICULTURE & LANDSCAPING 1314154.90
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
REFURBISHING OF MCL GUEST HOUSE, BHUBANESWAR
Name of Work: Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method and
Supply, installation, testing & commissioning of vertical inline multistage pumping set
BILL OF QUANTITY
Sl No. Item Particulars Unit Quantity Rate Amount
7 BOREWELL 2143060.62
24.1 Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method
prescribed in IS:2800 (part I), including collecting samples from different strata,
preparing and submitting strata chart/ bore log, including hire & running charges of all
equipments, tools, plants & machineries required for the job, all complete as per
direction of Engineer - in-charge, upto 90 metre depth below ground level.
24.1.2 Rocky strata including Boulders
24.1 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW
(Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain
ended c asing pipes of required dia, conforming to IS: 4270, of reputed & approved
make, including painted with outside surface with two coats of anticorrosive
paint of approved brand and manufacture, including required hire & labour
charges, fittings & accessories, all complete, for all depths, as per direction of
Engineer- in-charge.
24.10.3 200 mm nominal size dia having minimum wall thickness 5.40 mm Mtr 120.00 1631.20 195744.00
24.8 Gravel packing in tubewell construction in accordance with IS: 4097, including Cum. 20.00 976.60 19532.00
providing gravel fine/ medium/ coarse, in required grading & sizes as per actual
requirement, all complete as per direction of Engineer- in -charge.
24.12 Development of tube well in accordance with IS:2800 (part I) and IS: 11189, to Hour 10.00 614.75 6147.50
establish maximum rate of usable water yield without sand content (beyond
permissible limit), with required capacity air compressor, running the compressor for
required time till well is fully developed, measuring yield of well by ''V'' notch method
or any other approved method, measuring static level & draw down etc. by step draw
down method, collecting water samples & getting tested in approved laboratory, i/c
disinfection of tubewell, all complete, including hire & labour charges of air
compressor, tools & accessories etc., all as per requirement and direction of Engineer-
24.13 Providing and fixing suitable size threaded mild steel cap or spot as per requirement,
all complete for borewell of:
24.13.3 200 mm nominal size dia Each 1.00 243.90 243.90
24.14 Providing and fixing M.S. clamp of required dia to the top of casing/ housing
pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of
required size complete
24.14.3 200 mm nominal size dia Each 2.00 1310.15 2620.30
5.1.3 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) mix Cum. 10.00 5156.20 51562.00
for sanitary sealing of well at top (approx. 5m from top).
NS-9 Supply, installation testing & commissioning of submersible pumping set suitable to
operate on 410 volts 3 phase 50 HZ A.C. power supply including water proof joint free
cable, motor control panel, 50 mm dia, G.I. pipe (medium class) column with fittings,
clamps etc. complete in all respect as per details given below :
Pump to be lowered below ground at : 170 M
Pump capacity : 15000 litres/hr
1.1.1 Domestic Water Supply
Set of Two Pumps ( 1 Working + 1 Standby)
Capacity - 3.0 LPS (Each)
1.2 Supply, installation, testing & commissioning of vertical inline multistage pumping set
(Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-
304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal,
connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50
cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock,
vibration eliminating pads under foundations, 80x40 mm I section base plate bolted
to cement concrete foundations complete.Vendor to submit performance curves and
technical catalogue of the proposed model for review and information.
1.2.1 Filter Feed Pumps
Set of Two pumps (1 Working + 1 Standby)
Capacity -3.0 LPS
Head - 25.0 Mtr.
1.2.2 Flushing Water Transfer Pump
Set of two pumps (1 Working + 1 Standby)
Capacity -2.0 LPS
Head -30.0 Mtr.
1.2.3 Garden Irrigation Pumps
Set of two pumps (1 Working + 1 Standby)
Capacity - 2.0 LPS
Head -20.0 Mtr.
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
REFURBISHING OF MCL GUEST HOUSE, BHUBANESWAR
Name of Work: Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method and
Supply, installation, testing & commissioning of vertical inline multistage pumping set
BILL OF QUANTITY
Sl No. Item Particulars Unit Quantity Rate Amount
1.3 Supply, installing, testing and commissining of submersible single stage single entry
pumps with C.I.body and C.I. two vane enclosed type impeller connected to TEFC
submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with
mechanical seal, pump connector unit with rubber diaphram and bend, vertical
discharge pipe, guide pipe and chain in built level controller, sequence running
controller, dry running Protection complete in all respects.
1.3.1 Drainage Sump Pumps
(Pumps to be suitable to handle solids upto 12 mm size)
Capacity - 4.0 LPS (Each)
1.4 Providing and laying G.I. "C class" pipes and fittings conforming to IS: 1239 (Heavy
class) with fittings, union and clamps including cutting holes in wall, makes chases in
wall and making good the same in cement mortar 1:2 (1cement : 2 coarse sand) as
directed by Project Manager complete in all respects for internal works including pipe
supports with galvanised M.S. slotted angle iron, clamps, spacers as required and
making good wherever required.
1.5 Painting of G.I. pipes with two or more coats of synthetic enamel paint of approved
quality over a coat of red oxide zinc chromate primer as directed by the Engineer-in-
Charge (shade as per pipe colour code).
1.6 Providing and fixing cast iron double flanged butterfly valves (PN-16) complete with 2
nos. matching flanges,bolts, nuts, 3.0 mm thick insertion neoprene gasket.
1.7 Providing and fixing of cast iron double flanged dual plate type check valves (PN-16)
including 2 nos. matching flanges, nuts, bolts, 3.0 mm thick thick insertion neoprene
1.8 Providing & fixing of resilient rubber neoprene lined style arch vibration eliminators
suitable for raw water upto pressure 20 kg/cm2.
1.9 Providing and fixing of CI Y type suction strainer with gunmetal or brass internal parts
installed outside water tanks.
1.1 Providing and fixing forged brass ball valve of brass body with hard chrome plated
steel ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with
female BSP threads complete in all respects.
1.11 Controllers with low voltage relays, stainless steel probes and PVC shroud, wiring from
tank top to probes of required length. (No of probes as required for function of each
1.11.1 For Filter Feed Pumps
To cut off duty pump on low water level in the UG Raw water tank and high water level Each 1.00 3150.00 3150.00
in the UG Domestic water tank and To start pump at low water level in the UG
Domestic water tank.
1.11.2 For Drainage Sump Pumps.
To cut off duty pump on low water level in the sump, To start pump at high water level Each 1.00 3087.84 3087.84
in the sump and both pumps start when water over flowing.
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
REFURBISHING OF MCL GUEST HOUSE, BHUBANESWAR
Name of Work: Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method and
Supply, installation, testing & commissioning of vertical inline multistage pumping set
BILL OF QUANTITY
Sl No. Item Particulars Unit Quantity Rate Amount
1.1 Supply, installation, testing & commissioning of vertical self supporting filtration unit
fabricated from MS sheet as per IS: 2825, (minimum thickness of shell 6mm and
dished end 8mm) pressure gauges, sample cock, GI class 'C' face piping, CI butterfly
valves and all accessories , with initial charge of filter media including anthracite, 600
mm depth of graded sand gravel and 600 mm depth of anthracite painting inside with
epoxy paint and outside with two coat of red oxide primer and two or more coat of
synthetic enamel paint, testing and commissioning complete.
1.1.1 Dual Media Filter
Capacity- 10000 lph
Filtration rate - 12500 lph/sqm
Filter dia approx. - 1000 mm
Working pressure : 3.0 Kg/sq cm.
Test pressure : 4. 5 Kg/sq cm Each 1.00 130200.00 130200.00
1.1.2 Activated Carbon Filter
Capacity- 10000 lph
Filtration rate - 12500 lph/sqm
Filter dia approx. - 1000 mm
Working pressure : 3.0 Kg/sq cm.
Test pressure : 4. 5 Kg/sq cm Each 1.00 156009.00 156009.00
1.2 Supply, installation, testing & commissioning of metering pump type chemical doser Each 1.00 28560.00 28560.00
with motorize ajector, shaft & blade SS 304 material with 100 lits. PVC/HDPE solution
tank, injection fitting assembly, suction and delivery hose upto the point of injection,
capacity 0-6 lph, complete in all respects.
TOTAL OF BOREWELL AND PUMPS 2143060.62
BIBHU DUTTA Digitally signed by
BIBHU DUTTA MISHRA
MISHRA Date: 2022.09.10
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
01_NIT_06_BZ_2022_MCL GH.pdf
Tender Document
02_BOQ_MCL GH_06_2022.pdf
Tender Document
CS_cover_2_BOQ006BZNBCCBBSR2022.xlsx
Tender Document
03_APPROVED MAKES_06_BZ_2022.pdf
Tender Document
04_GCCContracting 2019 with 9 amendments.pdf
Tender Document
05_GCC Amendments 10 to 16.pdf
Tender Document
06_GCC AMMENDMENT NO_17.pdf
Tender Document
07_Instruction to Bidder.pdf
Tender Document
corrigendum-994-Corrigendum01.pdf
pdf • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .