Special repairs including all Civil works, Internal and External Electrical works, DG Sets, Substation,electrical equipments etc.,at CBI HQ New Delhi

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Different Civil & Electrical works related to maintenance

purpose based on DSR-2023 & 2022 respectively

DSR 2023 Rate as per

I /Non-DSR Civil Works 2023 DSR

Providing and laying in position cement concrete of specified grade

1 4.1 excluding the cost of centring and shuttering - All work up to plinth

1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including

manufactured sand derived from Recycled Concrete Aggregate

4.1.2A (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size cum 1.50 8127.80 12191.7

including Recycled Concrete

Aggregate (RCA) upto 25%).

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in

skirting, risers of steps and dados, over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness

to be specified by the manufacturer) with water absorption less

than 0.08% and conforming to IS : 15622, of approved make, in

3 11.41A all colours and shades, laid on 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand), including grouting the joints with white

cement and matching pigments etc.,

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

11.41.A.1 Double charge vitrified tile polished finish of size

Providing and fixing tiled false ceiling of approved materials of size

595x595 mm in true horizontal level, suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main “T” runner

with suitably spaced joints to

get required length and of size 24x38 mm made from 0.30 mm

thick (minimum) sheet, spaced at 1200 mm center to center and

cross “T” of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main “T” at 600 mm center

to center to form a grid of 1200x600 mm and secondary cross “T”

of length 600 mm and size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of the 1200x600 mm

panel to form grids of 600x600 mm and wall angle of size

24x24x0.3 mm and laying false ceiling tiles of approved texture in

the grid including, required cutting/making, opening for services

like diffusers, grills, light fittings, fixtures, smoke detectors etc.

Main “T” runners to be suspended from ceiling using GI slotted

cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners, 4mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at

1200 mm center to center along main T, bottom exposed width of

24 mm of all T-sections shall be pre-painted with polyester paint,

all complete for all heights as per specifications, drawings and as

directed by Engineer-in-charge

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

12.5 mm thick fully Perforated Gypsum Board tile made from

plasterboard having glass fibre conforming to IS: 2095 part I, of

size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm

5 12.52.4 c/c with center borders of 48 mm and the side borders of 30 mm, sqm 50 1528.00 76400

backed with non woven tissue on the back side, having an NRC (

Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded

glass wool backing.

Providing and fixing partition upto ceiling height consisting of G.I.

and required board, including providing and fixing of frame work

special section power pressed/ roll form G.I. sheet with zinc

coating of 120 gms/sqm(both side inclusive), consisting of floor

and ceiling channel 50mm wide having equal flanges of 32 mm and

0.50 mm thick, fixed to the floor and ceiling at the spacing of 610

mm centre to centre with dash fastener of 12.5 mm dia meter 50

mm length or suitable anchor fastener or metal screws with nylon

plugs and the studs 48 mm wide

having one flange of 34 mm and other flange 36 mm and 0.50 mm

thick fixed vertically within flanges of floor and ceiling channel and

placed at a spacing of 610 mm centre to centre by 6 mm dia bolts

and nuts, including fixing of studs along both ends of partition

fixed flush to wall with suitable anchor fastener or metal screws

with nylon plugs at spacing of 450 mm centre to centre, and fixing

of boards to both side of frame work by 25 mm long dry wall

screws on studs, floor and ceiling channels at the spacing of 300

mm centre to centre. The boards are to be fixed to the frame work

with joints staggered to avoid through cracks, M.S. fixing channel

of 99 mm width (0.9 mm thick having two flanges of 9.5

mm each) to be provided at the horizontal joints of two boards,

fixed to the studs using metal to metal flat head screws, including

jointing and finishing to a flush finish with recommended jointing

compound, jointing

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

75 mm overall thickness partition with 12.5 mm thick double skin

fire rated Glass Reinforced Gypsum (GRG) plaster board

conforming to IS: 2095: part 3 (Board with BIS certification

75mm overall thickness partition with 12.5 mm thick double skin

7 9.105.2 tapered edged plain Gypsum plaster board conforming to IS: sqm 100 1818.15 181815

2095: (part I): 2011 (Board with BIS certification marks)

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills , facias and similar locations of

required size, approved shade, colour and texture laid over 20 mm

thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints

treated with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all levels.

9 8.2.2.2 Area of slab over 0.50 sqm sqm 10 5136.30 51363

Extra for providing opening of required size & shape for wash

basin/ kitchen sink in kitchen platform, vanity counter and similar

10 8.5 location in marble/ Granite/stone work, including necessary holes each 20 978.70 19574

for pillar taps etc. including moulding, rubbing and polishing of cut

edges etc. complete.

Painting (one or more coats) on rain water, soil, waste and vent

13.94 pipes and fittings with synthetic enamel paint of approved brand

and manufacture and required colour on old work :

11 13.94.2 100 mm diameter pipes metre 500.00 35.50 17750

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

12 13.94.3 150 mm diameter pipes metre 800.00 51.20 40960

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50

grams/ litre of approved brand and manufacture, including

applying additional coats wherever required to achieve even shade

Painting (one or more coats) with black Japan paint of approved

brand and manufacture to give an even shade.

Finishing walls with water proofing cement paint of required shade

Old work (one or more coats applied @ 2.20 kg/10 sqm) over

15 13.109.1 priming coat of primer applied @ 0.80 litres/10 sqm complete sqm 200 112.90 22580

including cost of Priming coat.

13.110 Finishing walls with textured exterior paint of required shade :

Old work (Two or more coats on existing cement paint surface

applied @ 3.28 litre/10 sqm.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard tubular

sections/ appropriate Z sections and other sections of approved

make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides with required EPDM

rubber/ neoprene gasket etc. Aluminium sections shall be smooth,

rust free, straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap beading for glazing

/ panelling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer-in-charge.

(Glazing, panelling and dash fasteners to be paid for separately) :

Powder coated aluminium (minimum thickness of powder coating

Providing and fixing aluminium tubular handle bar 32 mm outer

21.12 dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete

as per direction of Engineer-in-Charge.

18 21.12.1 Anodized (AC 15 ) aluminium tubular handle bar each 5 575.75 2878.75

Powder coated minimum thickness 50 micron aluminium tubular

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing

and fixing top & bottom pivot & spring type fixing arrangement and

making necessary holes etc. for fixing required door fittings, all

complete as per direction of Engineer-in-charge (Door handle, lock

and stopper etc.to be paid separately).

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and Fixing 15 mm thick densified tegular edged eco

friendly light weight calcium silicate false ceiling tiles of approved

texture of size 595 x 595 mm in true horizontal level, suspended

on inter locking metal grid of hot dipped galvanised steel sections

(galvanising @ 120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get required length

and of size 24x38 mm made from 0.33 mm thick (minimum)

sheet, spaced 1200 mm centre to centre, and cross “T” of size

24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long

spaced between main’T’ at 600 mm centre to centre to form a grid

of 1200x600 mm and secondary cross ‘T’ of length 600 mm and

size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be

21 12.53 inter locked at middle of the 1200x 600 mm panel to from grid of sqm 20 2158.15 43163

size 600x600 mm, resting on periphery walls /partitions on a

Perimeter wall angle pre-coated steel of size(24x24X3000 mm

made of 0.40 mm thick (minimum) sheet with the help of rawl

plugs at 450 mm centre to centre with 25 mm long dry wall screws

@ 230 mm interval and laying 15 mm thick densified edges

calicum silicate ceiling tiles of approved texture in the grid,

including, cutting/ making opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc., wherever required.

Main ‘T’ runners to be suspended from ceiling using G.I. slotted

cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and

50 mm long dash fasteners, 4 mm G.I. adjustable rods with

galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed

glazing and false ceiling including disposal of unserviceable surplus

material and stacking of serviceable material with in 50 meters

lead as directed by Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :

24 13.99.1 One or more coats on old work sqm 2000 102.80 205600

25 13.114 Melamine polishing on wood work (one or more coat). sqm 250 1192.30 298075

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area

2.5 sq. meters and under, including cutting the patch in proper

14.10 shape, raking out joints and preparing and plastering the surface

of the walls complete, including disposal of rubbish to the dumping

ground within 50 metres lead :

26 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) sqm 50.00 547.40 27370

27 14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 10.00 560.50 5605

Providing and laying machine cut, mirror polished, Italian Marble

stone flooring laid in required pattern in linear portion of the

building all complete as per architectural drawings, with 18 mm

thick stone slab laid over 20 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white

cement slurry @ 4.4 kg/sqm including pointing with white cement

slurry admixed with pigment to match the marble shade including

rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble

stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore.

18mm Italian Marble stone slab, Perlato , Rosso Verona,Fire Red or

Dark Emperadore.

Providing and fixing machine cut, mirror / eggshell polished ,

Marble stone work for wall lining (veneer work) including dado,

skirting, risers of steps etc., in required design and pattern

wherever required, stones of different finished surface texture, on

12 mm (average) thick cement mortar 1:3 (1 cement : 3 oarse

sand) laid and jointed with white cement slurry @ 3.3 kg/sqm

including pointing with white cement slurry admixed with pigment

of matching shade, including rubbing, curing, polishing etc. all

complete as per Architectural drawings, and as directed by the

Engineer-in-Charge.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire

Red or Dark Emperadore etc.

Float glass sheet of nominal thickness 5.5 mm (weight not less

than 13.50 kg/sqm)

Dismantling dressed stone work ashlar face stone work, marble

work or precast concrete work manually/ by mechanical means

15.10 including stacking of serviceable and disposal of unserviceable

material within 50 metres lead as per direction of Engineer-in-

31 15.10.2 In cement mortar cum 1 2877.75 2877.75

Removing mortar from and cleaning stones and concrete articles

(net quantity of stacks of cleaned materials will be measured) :

32 15.11.2 In cement mortar cum 1 689.20 689.2

Providing and fixing double scaffolding system (cup lock type) on

the exterior side, up to seven story height made with 40 mm dia

M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes, M.S. tube challies,

M.S. clamps and M.S. staircase system in the scaffolding for

working platform etc. and maintaining it in a serviceable condition

for the required duration as approved and removing it there after

.The scaffolding system shall be stiffened with bracings, runners,

connection with the building etc wherever required for inspection

of work at required locations with essential safety features for the

workmen etc. complete as per directions and approval of

Engineering-charge .The elevational area of the scaffolding shall be

measured for payment purpose .The payment will be made once

irrespective of duration of scaffolding.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Providing and fixing in wall lining flat pressed three layer (medium

density) particle board or graded wood Pre-laminated one side

decorative lamination and other side balancing lamination Grade I,

Type II, IS : 12823 marked, including priming coat on unexposed

surface, with necessary fixing arrangement and screws etc.

Providing and fixing specified wood frame work consisting of

8.27 battens 50x25 mm fixed with rawl plug and drilling necessary holes

for rawl plug etc. including priming coat complete.

34 8.27.1 Kiln seasoned and chemically treated hollock wood cum 0.25 187277.65 46819.4125

Distempering with 1st quality acrylic washable distemper (ready

13.4 made) of approved manufacturer and of required shade and colour

complete as per manufacturer’s specification.

35 13.42.1 One or more coats on old work sqm 2000 92.75 185500

Mirror polishing on marble work/Granite work/stone work where

required to give high gloss finish complete.

Finishing walls with Acrylic Smooth exterior paint of required shade

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and

37 13.46.1 including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 100 160.60 16060

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

38 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 5 7370.65 36853.25

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Dismantling Door Windows and clerestory window (wood or steel)

15.12 shutter including chowkhat, archivtrative, holdfasts etc. Complete

and stacking with 50 metre leads

39 15.12.1 Of area 3 sq.meters and below Sqm 10 367.20 3672

Dismantling stone slab flooring laid in cement mortar including

40 15.25 stacking of serviceable material and disposal of unserviceable Sqm 5 266.45 1332.25

material within 50 metres lead.

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water

proofing cement compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/ sqm. This layer will be allowed to

41 22.5 air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 Sqm 150 617.05 92557.5

kg/sqm mixed with water proofing cement compound @ 0.126

kg/sqm. This layer will be allowed to air cure for 4 hours followed

with water curing for 48 hours. The rate includes preparation of

surface, treatment and sealing of all joints, corners, junctions of

pipes and masonry with polymer mixed slurry.

Providing and laying Gypsum panel partitions 100 mm thick with

water proof Gypsum panels of size 666x500x100 mm, made of

calcite phosphor Gypsum fixed with tongue and groove, jointed

with bonding plaster as per manufacturer’s specifications in

uperstructure above plinth level up to floor V level. Gypsum blocks

will have a minimum compressive strength of 9.3 kg/cm2

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Polishing in high gloss/matt finish melamine clear polish on wood

work in required colour/wooden shade texture with following

in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no.

and then with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing

sufficient drying time for 1st coat and 2nd coat is allowed to dry for

8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery

cloth of finer grading with ample water to remove excess sealer

layer and make the surface further smooth after this wet rubbing,

then surface is applied with special grade melamine fillers to fill all

the small and big holes/grooves etc. Filler coat to be allowed to dry

for 4 to 6 hrs. on which again a light wet rubbing is done this

surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of

melamine polish is applied with spray gun using melamine clear

polish and melamine thinner in required proportion. This 1st coat is

allowed to dry for 24 hrs. then this dry surface is again fine wet

rubbed smooth, which is further allowed

to dry for 12 hrs. The final melamine polish is applied with

compressor pressure spray gun using melamine clear polish and

melamine thinner mixed in required proportion complete as per

direction of Engineer-in-Charge. (Final coat to be done in 1or 2

layers without gap of time.)

Structural steel work riveted, bolted or welded in built up sections,

trusses and framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer all

Total Amount of DSR (Civil) 2023 : (A) 3899584.37

Total Amount of DSR (Civil) 2023 : (A) 3899584.37

II /Non-DSR Electrical Works

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Supplying and drawing following sizes of FRLS PVC insulated

1 1.17 copper conductor , single core cable in the existing surface/

recessed steel/ PVC Conduit as required

Supplying and drawing following pair 0.5 dia FRLS PVC insulated

5 1.18 annealed copper conductor , unamored telephone cable in the

existing surface/ recessed steel/ PVC Conduit as required

Supplying and fixing of following sizes of medium class PVC conduit

along with accessories in surface/ recess including cutting the wall

and making good the same in case of recessed conduit as

Supplying and drawing of UTP 4 Pair CAT 6 LAN Cable in the

existing surface/recessed Steel/PVC conduit as required.

Supplying , laying, fixing testing and commissioning of following

thickness closed cell elastrometric nitrile rubber of class O applied

by suitable adhesive , as per specifications and as required

complete in all respect

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Supply , installation , balancing and commissioning of fabricated at

site GSS sheet metal rectangular / round ducting complete with

15 16.12.2 neoprene rubber gaskets, elbows , splitter dampers,vanes

,hangers support etc. as per approved drawings and specifications

of following sheet thickness complete as required.

17 16.12.2.3 Thickness 1 mm sheet sqm 50.00 1629.00 81450

Supplying & Fixing of powder coated extruded aluminium supply

18 16.15 Air Grills with aluminium volume control dampers as per sqm 50.00 9105.00 455250

specifications.

Supplying, Fixing testing commissioning of supply air diffusers of

19 16.17 powder coated aluminium with aluminium volume control dampers sqm 50.00 12184.00 609200

with anti smudge ring & removable core.

Supplying, Fixing testing commissioning of out air diffusers of

20 16.18 powder coated aluminium with aluminium volume control dampers sqm 50.00 8121.00 406050

with anti smudge ring & removable core.

Providing, laying, testing & commissioning of 'C' class heavy duty

MS pipe conforming to IS 3589/IS 1239 including Welding, fittings

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and

fixing the pipe on the wall/ceiling with suitable clamp/support

frame and painting with two or more coats of synthetic enamel

paint of required shade complete as required :

Supplying, fixing, testing and commissioning of butterfly valve of

PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete

18.11 with nuts, bolts, washers, gaskets conforming to IS 13095 of

following sizes as required :

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Total Amount of DSR (Electrical) 2022 : (B) 3081914

Total Amount of DSR (Electrical) 2022 : (B) 3081914

III Non DSR Items Civil & Electrical

Charges for providing and fixing of Glass of ST 408 DEEP GREEN

1 MR 1 colour of size 6mm including complete fitting , Labour as per Sqm 20 10078.34 201566.8

instruction of Engineer In charge.

Charges for providing and fixing of 12mm thick Toughened glass

2 MR 2 partition include complete fitting as per instruction of Engineer In Sqm 100 4836.80 483680

Charges for providing of Floor spring machine of make Door set/

Dorma including labour for complete fitting.

Charges for providing of glass door pivots of make Door set/

Dorma including labour for complete fitting.

Providing & fixing of GYPSUM tiles 595x595 mm,12.5 mm thick

5 MR 5 fully Perforated Gypsum Board tile made from plasterboard having Sqm 100 655.49 65549

glass fibre conforming to IS: 2095 part.

Providing & fixing of 12.5 mm thick tapered edge gypsum moisture

resistant board.

7 Dry cleaning of Sofa sets & Carpets ;-

8 MR 7 One seater No. 0 715.08 0

9 MR 8 Two seater No. 0 1001.11 0

10 MR 9 Three seater No. 0 1287.14 0

11 MR 10 Carpets Sq.ft 0 14.30 0

Providing & fixing of as per urinal port make Urinal Sensor with

battery as per direction of engineer in-charge.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Replacement of Electronic Curtain motors along with remote and

its reprogramming as required.

Rewinding & repairing of electric motors (copper) of different

capacity with other accessories complete as required:-

Providing of SS body Hand dryer for the washrooms EH270 N

Euronics or equivalent

Providing & fixing of looking mirror glasses of 6mm thick including

24 MR 15 bevelling, holes studs complete as per direction of Engineer In Sqm 50 4476.40 223820

Providing & installation of 450 mm sweep wall fan of make

Crompton/Havells

Providing and fixing of Hind ware/parry ware washbasin including

26 MR 17 fitting, cutting and making good wall wherever required as per No 10 5467.50 54675

direction of Engineer In charge.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

28 MR 19 Charges for providing and Fixing of Anti Skid Tape. metre 50 463.61 23180.5

29 MR 20 Supply of choke 13 watt No 50 172.81 8640.5

30 MR 21 Charges for supplying and fixing of exhaust fan. No. 20 3194.02 63880.4

31 MR 22 Supply and fixing of floor mat Sqm 50 846.38 42319.08

34 MR 25 Supply and fixing of CAT 6 LAN I/O , Make D link No. 100 239.55 23955

35 MR 26 Supply of Automatic digital lock No. 0 19962.65 0

36 MR 27 Supplying of tooth pick (50 pcs1 box) No. 0 4791.04 0

Providing and fixing in position film of approved colour, design &

texture over glass wherever required complete in all respects.

38 MR 29 Supply of lift light 7watt No. 50 1245.43 62271.5

Providing and fixing of Eco clik locking system on the edges 5mm

thick, antifungal Castor chair resistant chemical resistant, fire

resistant formal dehyde LVT flooring as per approved shade as per

site condition and direction of Engineer In Charge.

Dismentaling & refixing of table & mic at attrium 11th floor of CBI

SITC of polycarbonate sheet 8mm thick including fastners , screws

etc. complete in all respect

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

SITC of Sump pumps with Head of 20 meters and discharge 202

42 MR 33 LPM kirloskar 2200 CW 3 HP with automatic start panel float switch No 5 58294.00 291470

control cabling power cabling complete in all respects

Total Amount of Non- DSR : (C) 3194536.66

Total Amount of Non- DSR : (C) 3194536.66

IV Plumbing and Drainage works - Non.DSR items

Maintenance & up keep of Plumbing, Sanitary, Carpentry and

water supply with external drainage installation complete to keep

the system operational and cleaning of underground and over head Per

water tank etc. at all time including Sunday & other Holiday. Water month

Supply and Plumbing System Complete Whole external drainage

2 1.1 Under ground & Over head tank cleaning & repair etc. 2 70478.28 140956.57

Supply of Hand spray set of Jaquar make of model No ALD-583 or

4 1.3 Supply of Bottle trap of Jaquar make ALD-769L300 or Equivalent. No. 50 1994.00 99700.03

Supply of Soap Dispenser of Jaquar make model no CAN-1135N or

6 1.5 Supply of Sink Waste Jali of 4" No. 50 884.91 44245.58

7 1.6 Supply of Ball cock of Flushing cistern of make superflo. No. 50 589.94 29497.05

8 1.7 Supply of EWC seat of S type of make Hind ware or Equivalent. No. 5 19949.70 99748.48

Supply of EWC seat cover of S type of make Hind ware or

10 1.9 Supply of heavy duty flexible connection pipe 45cm to 90cm No. 100 235.98 23597.64

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

11 1.10 Supply of UPVC 6 KG pressure pipe 75mm metre 100 262.20 26219.6

12 1.11 Supply of UPVC 6 KG pressure pipe 110mm metre 50 419.51 20975.68

13 1.12 Supply of Mixture Phase /spindle No. 50 576.83 28841.56

14 1.13 Supply of Flexible pipe of sink No. 100 176.98 17698.23

15 1.14 Supply of Drain jali 4" No. 100 117.99 11798.82

16 1.15 Supply of Drain jali 3" No. 100 98.32 9832.35

17 1.16 Supply of Drain jali 5" No. 100 144.21 14420.78

18 1.17 Supply of Paper Holder of Jaquar make AQN-7751or Equivalent. No. 15 2279.97 34199.47826

20 1.19 Supply of Hexa blade No. 17 26.22 445.7332

21 1.20 Supply of Dhaga Gola No. 20 19.66 393.294

23 1.22 Supply of Teflon tape No. 15 26.22 393.294

Supply of Mixture tap of Jaquar make model no CON-167KND or

25 1.24 Supply of Duracell battery No. 0 79.80 0

26 1.25 Supply of Urinal battery Box set No. 50 1114.33 55716.65

27 1.26 Carpentry material 0

28 1.27 Supply of Door closer No. 25 3002.14 75053.605

29 1.28 Supply of Goodrej Lock set No. 25 3080.80 77020.075

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

30 1.29 Supply of Steel Door Handle No. 15 1835.37 27530.58

31 1.30 Supply of Star Screw 1.5" No. 1450 4.59 6653.2235

32 1.31 Supply of Star Screw 2" No. 350 4.59 1605.9505

33 1.32 Supply of SR Solution 998 Kg 1 1297.87 1297.8702

34 1.33 Supply of Fevicol Kg 3 839.03 2517.0816

37 1.36 Supply of Trishul Bit (20mm) No. 1 249.09 249.0862

38 1.37 Supply of Gypsum patch 3/4" No. 1500 2.62 3932.94

39 1.38 Supply of Gypsum patch 1/2" No. 2000 2.62 5243.92

40 1.39 Supply of PVC Gitti screw 1/2" & 2' No. 350 3.93 1376.529

41 1.40 Supply of normal door stopper No. 40 393.29 15731.76

42 1.41 Supply of push door stopper No. 5 249.09 1245.431

44 1.43 Supply of double tape No. 5 353.96 1769.823

47 1.46 Supply of back rubber No. 5 78.66 393.294

48 1.47 Supply of Glass door stopper No. 20 655.49 13109.8

49 1.48 Supply of Door cylinder lock set 8" No. 20 3277.45 65549

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

50 1.49 Supply of drawer lock No. 50 327.75 16387.25

51 1.50 Supply of L Drop 3" (Golden Color) No. 2 878.36 1756.7132

52 1.51 Supply of L Drop 6" (Steel Color) No. 2 996.34 1992.6896

53 1.52 Supply of L Drop 8" (Steel Color) No. 2 1101.22 2202.4464

54 1.53 Supply of Toilet door lock No. 1 1573.18 1573.176

55 1.54 supply of PVC gitti 1.5" Pkt 35 72.10 2523.6365

56 1.55 Supply of PVC gitti 2" Pkt 1 85.21 85.2137

63 1.62 Supply of Bib cock (tap) No 50 1709.97 85498.69565

V Internal & External Electrical Works

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Operation & Routine Maintenance of all Internal Electrical

installation works(emergency as well as normal system) on floors

including floor panels, sub mains, cables, DBs, point wiring,

fixtures, bus ducting / rising mains etc. of the different floors as

per installation in the building / campus complete as per the

terms and conditions of the Contract, Electrical Installations /

Street lights/ D.G sets/Substation & Distribution

system.Compound Lights, street lights, feeder pillar and all power

cables and other items related to this for the whole campus all the

installation complete as per terms and conditions of the contract.

Maintenance and upkeep of all internal electrical installations in

basements including sub mains, cables, DBs, point wiring, fixtures,

1 2.1 bus ducting / rising mains etc. of the basements (I and II) 12.00 997355.45 11968265.36

complete as per terms and conditions of the contract.Running

Operation &Maintenance of DG Set of capacity 3 Nos. 1010 KVA

each and 1 No. 750 KVA on all the days round the clock including

Sunday & Holidays complete with all materials i/c Mobil oil, grease

etc. and all other such things required for its satisfactory

functioning including the allied pumping system and cooling towers

etc. but excluding diesel oil complete as per terms and conditions

of the contract.Substation & Distribution System for Running

Maintenance and upkeep of all HT, LT electrical installation

including panels, transformers, bus ducts, rising main, power

cables, earthing pits, lightening protection systems, UPS etc. upto

floor panel as per terms and conditions of the contract.

Servicing/repairing and cleaning of 63 Nos. LT Panels, including

capacitor panals,HVAC panals,Rising main panel.

Servicing of 3 Nos x 1010 KVA + 1 No x 750 KVA DG sets. Brief

3 2.3 work consist of B-check & C-check of engine, replacement of Year 1 968985.22 968985.2174

Batteries, chemical cleaning of cooling tower etc.

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

Annual Service Contract of 3 Nos x 1010 KVA + 1 No x 750 KVA

4 2.4 DG sets with AMF panel powered with cummins diesel engines Year 1 445733.20 445733.2

under 12 visit plant for one year.

Servicing, Overhauling , Healthiness Testing of 33 KV/.433 of 4

5 2.5 Nos x 2000 KVA Dry type Transformers with all relevant servicing Year 1 273595.83 273595.8261

& testing as required for above transformers.(As per offer of L&T).

Servicing , inspection, overhauling and protection testing of HT

6 2.6 Panel 33 KVA breaker, isolator, Relays etc. equipment including Year 1 170997.39 170997.3913

VCB. (As per offer of L&T).

Supply of T-5 fitting Tube light of 14 W of make philips or

8 2.8 Supply of T-5 fitting Choke of 14 W of make philips or Equivalent. No. 225 996.34 224177.58

9 2.9 Supply of CFL 865 13W two pin of make philips or Equivalent. No. 860 176.98 152204.778

10 2.10 Supply of LED bulb 40W for Lamps. No. 90 157.32 14158.584

Supply of Compound box PVC 8X3 of make Schneider or

Supply of Compound box PVC 4X3 of make Schneider or

Supply of Compound plate PVC 6 Module of make Schneider or

Supply of Compound plate PVC 3 Module of make Schneider or

Supply of CFL 865 18W two pin white of make philips or

16 2.16 Supply of CFL 865 18W Four pin white of make philips. No. 30 262.20 7865.88

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

17 2.17 Supply of 6A switch of make Schneider or Equivalent. No. 210 116.68 24502.2162

18 2.18 Supply of 16A switch of make Schneider or Equivalent. No. 150 187.47 28120.521

19 2.19 Supply of 6A socket of make Schneider or Equivalent. No. 85 194.03 16492.1284

20 2.20 Supply of 16A socket of make Schneider or Equivalent. No. 150 258.26 38739.459

21 2.21 Supply of 6A Top of make Schneider or Equivalent. No. 50 64.24 3211.901

22 2.22 Supply of 16A Top of make Schneider or Equivalent. No. 35 89.15 3120.1324

Supply of Panel Indicator lamp for pannel of RED, Yellow,Blue of

24 2.24 Supplyof 3 module Compound plate pvc No. 5 137.65 688.2645

25 2.25 Supply of T-5 tube light 28W No. 30 129.79 3893.6106

26 2.26 Supply of Tube light 36W No. 450 62.93 28317.168

28 2.28 Supply of Starter 36W No. 270 111.43 30086.991

29 2.29 Supply of 36W LED light complete fitting No. 50 504.73 25236.365

30 2.30 Supply of cooper strip 50/6 No. 5 1442.08 7210.39

31 2.31 Supply of cooper strip 25/5 No. 5 917.69 4588.43

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

32 2.32 Supply of Old Dhoti No. 110 52.44 5768.312

33 2.33 Supply of PVC tape (10x1box) Box 10 389.36 3893.6106

34 2.34 Supply of Halogen tube 1000W No. 40 108.81 4352.4536

35 2.35 Supply of halogen holder No. 5 589.94 2949.705

37 2.37 Supply of capacitor rating 2.5 farad No. 5 39.33 196.647

38 2.38 Supply of capacitor rating 3.15 farad No. 5 45.88 229.4215

39 2.39 Supply of RCCB 63 amp make Schneider or Equivalent. No. 5 5296.36 26481.796

40 2.40 Supply of RCCB 40 amp make Schneider or Equivalent. No. 5 4477.00 22384.9835

41 2.41 Supply of MCB 10 amp make Schneider or Equivalent. No. 5 180.92 904.5762

42 2.42 Supply of MCB 16 amp make Schneider or Equivalent. No. 5 180.92 904.5762

Supply of High Pressure sodium lamp 70 W Model No. EE27200-

250v make Phillips or Equivalent.

Supply of High Pressure Mercury lamp 125 W Model No. HQL(MFB-

Supply of Bulb white thread 40W compac size make phillips or

Supply of Choke 70W Model No BSN070M363 make phillips or

Supply of Bulb thread 125W Model No SON/T150V make phillips or

48 2.48 Supply of CFL 4 pin 36W PL-L4P make phillips or Equivalent. No. 5 262.20 1310.98

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

49 2.49 Supply of LED Light 15W Model No DS-1/1-4 1W No. 150 603.05 90457.62

Supply of PVC insulated FRLS 4mm wire make polycab, Havels ,

finolex. (90 meter in 1 roll)

Supply of PVC insulated FRLS 2.5mm wiremake polycab, Havels ,

finolex.(90 meter in 1 roll)

Supply of PVC insulated FRLS 1.5mm wiremake polycab, Havels ,

finolex (90 meter in 1 roll)

53 2.53 Supply of PVC Batten 25mm No. 150 78.66 11798.82

54 2.54 Supply of PVC Batten 50mm No. 25 117.99 2949.705

55 2.55 Supply of Cable tie having 50 ties in one packet No. 2 262.20 524.392

56 2.56 Supply of complete halogen 1000W No. 5 1573.18 7865.88

Supply of complete LED focus light 18w make phillips or

Supply of LED Light fitting 600X600 MM of make phillips or

59 2.59 Supply of CFL light (Simple holder) 18W make Osram. No. 2 190.09 380.1842

60 2.60 Supply of extension board of 4 shocket No. 1 852.14 852.137

61 2.61 Supply of LED bulb thread of 7W make Osram No. 50 116.68 5833.861

62 2.62 Supply of PVC insulated flexible 3 core 6sqmm copper wire m 210 229.42 48178.515

63 2.63 Supply of Red & Green Busy light with remote complete No. 5 2490.86 12454.31

65 2.65 Supply of I O Box (PVC/GI) No. 100 308.08 30808.03

66 2.66 Supply of I O Face Plate No. 100 314.64 31463.52

67 2.67 Supply of RJ 45 Socket No. 500 11.80 5899.41

Name of work:- Special repairs including all Civil works, Internal & External Electrical works / DG Sets / Substation equipments and

Plumbing & Drainage works

Item / DSR Approx.

Sl. No. Name of the component Unit Rate Amount (₹)

68 2.68 Supply of Jhalar lights all colours No. 0 196.65 0

69 2.69 Supply of hepa filter of required sizes to be fixed in existing AHUs. No 200 3801.84 760368.4

70 2.70 Supply of bollard LED light 9 watt No 22 2359.76 51914.808

71 2.71 Supply of LED post top lantam No 25 4719.53 117988.2

72 2.72 Supply of LED street light fixtures 50 watt No 0 15141.82 0

Grand Total inclusive of GST Prices ₹ 3,53,70,350.00

Grand Total inclusive of GST Prices ₹ 3,53,70,350.00