SPECIAL REPAIRS TO BLDG NO. OWT-454 AND OWT-456 AND PROVN OF COVERED SHED FOR LRW OF ASC BN AT LIKABALI MIL STN UNDER GE 872 EWS

Amount

B/R SERVICES/WORKS

Demolition Brick Work or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Taking down Chowkat or Frame of any description (without Taking Off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Shutter of any description, exc. 1.0 Square Metre but not exc. 2.0 Square Metre Each, complete all as specified and as directed.

Dismantling Wrought Iron or Mild Steel Work of any description, complete all as specified and as directed.

Dismantling Asbestos Cement (Corrugated or Semi-corrugated) Sheets in Roof Coverings, etc. of any thickness including Nainital or Similar Pattern Roof Coverings, complete all as specified and as directed.

Dismantling Ceiling Frame (Snap Grid) with Hangers (but except Boards) of any descriptions, complete all as specified and as as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation, etc.) or Insulation Boards/ Slabs/ Blankets of any descriptions including Cover Fillets, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including Raking out Joints, Hacking for Key, Scrubbing down with Water and Removing Debris, etc. etc. to a distance not exc. 100.00 Metre, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Fittings/ Connections of any description from any Situations, complete all as specified and as directed.

Lowering down Unserviceable Water Storage Tank exc. 500 Litre but not exc. 1000 Litre Capacity of any description with Float Valve after disconnecting Water Supply Connections, complete all as specified and as directed.

Taking up or down PVC (SWR) Soil, Waste and Ventilating Pipe 75/110mm bore (dia) with Fittings of any description from any Situations, complete all as specified and as directed.

Surface Dressing not exc. 15 Cm deep and getting out in Soft/Loose soil, complete all as specified and as directed.

Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc., not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.

M&L Hardcore broken Stone or Boulders, Gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True Surface, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded aggregates) in Foundations, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork is deemed to be included in the Quoted Unit Rate.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Foundation including Raft, Footing, Foundation Beam for Column Basement Slab, under reamed Piles, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Chajjas and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Landings, Cover Slabs, Manhole Cover Slabs, etc., Set in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Reinforcement will be Measured & Paid separately under relevant Item.

M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams; and Similar Work; Vertical or to Batter, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.

M&L Formwork to Sides Pillars, Posts, Struts, Piers, Columns and Stanchions and Similar Work; Rough Finished surfaces of Concrete, Square or Rectangular, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunchings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.

M&L Formwork to Chullah hoods, Chajjas, Weather Shades, Corbels, Water Troughs and Similar Items including Edges, Rough Finished Surface of Concrete Flat, complete all as specified and as directed.

M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks of Size 300x200x200mm or 300x200x100mm, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and Setting in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work Half Brick thick with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan to any Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cutting Holes in Brick/ Pre-cast Concrete Block Walling, not exc. Half Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and Adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed.

S&F Flush Shutter 35mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick and fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 35mm thick, Divided into Squares, with plain, chamfered or rounded, mitred and rebated Sash Bars to receive Gauge/Glass, any numbers, sizes of Members of Shutter as specified in MES Schedule Part-I, Section 8, Clause 8.24(a) and fitted to Chowkat, complete all as specified and as directed.

M&L Taking down Shutter of any description exc. 1.0 Square Metre but not exc. 2.0 Square Metre Each and Refixing in Same Opening including necessary Resecuring, or Easing & Adjusting, etc., complete all as specified and as directed.

S&F Glass Fibre Reinforced Plastic (FRP) Panelled Door Shutter 30mm thick of required Colour and Approved Brand and Manufacture, made with Fire Retardant grade Unsaturated Polyester Resin, moulded to 3.0mm thick FRP Laminate for forming Hollow Rails and Styles with Wooden Frame and suitable Blocks of Seasoned Wood inside at required Places for fixing of Fittings, Cast Monolithi-cally with 5.0mm thick FRP Laminate for Panels conforming to IS:14856 including Fixing to existing Door Frames, complete all as specified by the Manufacturer, complete all as specified and as directed.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Frame for Doors, Windows, Ventilators with One or More Rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) 3 Track Sliding Window, 3 Shutter Series B (Shutter Scetion 18mm) with 2 Glazed Shutters Each covering ⅓ rd Opening and One Gauge Shutter covering ⅓ rd Opening including Self Closing Locking Arrangement, Stoppers and Rubber Beading Gasket without Sash Bar Aluminium Section Weighing 1.6 KG/RM including Joining Cleats, Glazing Clips, Rubber Packing, Powder Coated Aluminium Beading, Screws including Fittings in Each Shutter with 5.0mm thick Tinted Glass, Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm, complete all as specified and as directed. NOTE :- (a) 3-way Track Sliding Window of Frame of Size 92x31.75x1.5mm and Shutter Size 40x18mm with 9.0mm Interlocking Leg x 1.45mm thick and Weight not less than 0.607 KG/RM. (b) Cost of all Fittings/ Builders Hardware, Tinted Glass, Stainless Steel Wire Cloth, Rubber Beading Gasket, Aluminium Beading, Screws, etc. as metioned here-in-above will deemed to be included in the Quoted Unit Rate.

M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Ventilator, Openable, Top Hung and Bottom Portion Fixed type without Sash Bars, Shutters made out of Aluminium Section (Weight not less than 0.55 KG/RM) including Glazing, necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws and Top Hung Shutter fixed Hook & Eyes - 01 No., Anodised Aluminium Barrel Tower Bolt of Size 100mm - 01 No., Anodised Aluminium Handle 75mm - 01 No. on Each Shutter, fixed to Frame, complete all as specified and as directed. NOTE : Cost of Aluminium Fittings/ Builders Hardware as metioned here-in-above will deemed to be included in the Quoted Unit Rate. However Glazing, Wire Netting will be Measured and Paid Separately under respective Items.

S&F Steel Windows with Side Hung Shutters including Projecting type Hinges with Steel Handle and Steel Peg Stay, complete With Glazing Bars, dovetailed or welded, complete all as specified and as directed.

S&F Steel Windows with Side Hung Shutters including Projecting type Hinges with Steel Handle and Steel Peg Stay, complete Without Glazing Bars, dovetailed or welded, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt of Size 150mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt of Size 200mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, Sliding Door Bolt 250mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 75mm, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge of Size 100mm, complete all as specified and as directed.

S&F Aluminium Handle of Size 150mm, anodised, Cast type, complete all as specified and as directed.

S&F Floor Door Stopper with Overall length of Cover Plate 75mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixed in Floor and Fixed-in-repairs, complete all as specified and as directed.

S&F Mild Steel Ordinary Rat Tail Rod Pattern Spring 200mm for Door Shutters including Roller and Roller Plate and Fixed-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Curtain Rail/ Rod 24/25mm Outer Dia with and including Stainless Steel Decorative Finials with Stainless Steel Brackets and fixed on Walls, etc. and Fixed-in-repairs, complete all as specified and as directed. NOTE :- (a) Stainless Steel Decorative Finials and Stainless Steel Brackets will be provided for Each Length of Curtain Rail/ Rod and Cost of the same will deemed to be included in the Quoted Unit Rate. (b) Only Length of Curtain Rail/ Rod will be Measured for Payment.

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed

S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Figured/ Pin Headed type and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for Columns, Hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Mild Steel Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes including Bolts, Hooks (Stay) for Large Gates; Hook and Pintle Hinges: Large Hasps and Staples; Hand Made Sliding Bolts; Clamps; Holdfasts; Wall Ties and Similar Small Articles conforming to Fe-290 Gde-E-165, complete all as specified and as as directed.

M&L Mild Steel Framed Brackets of Angles or Tees with Web and Flanges, cut to Shape, drilled and countersunk for Screw including bending and welding Angles as necessary, Gusset Plates, Riveting, etc., not exc. 10 KG Each Brackets, conforming to Fe-290, Gde E-165, complete all as specified and as directed.

M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed.

M&L Rolled Mild Steel in Roof Trusses (Framed), Trussed Purlins, Crane Gantries, Rails & Fastenings, Heavy Bracket Framing (Beam, Tee, Angle, Channel or Flat Sections) including Distance Pices, Cleats, etc., conforing to Fe-410-W (Gde-E 250), Quality 'A', complete all as specified and as directed.

M&L Mild Steel Tubular Trusses, Rafter, Purlins, etc. including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed.

M&L Plates (Plain or Chequered) Channels, Square cut or Notched (Ordinary and Counter Sunk) forming Holes, without any Aattachment, conform to Gde Fe-410-W (Gde E-250) Quality 'B', complete all as specified and as directed.

M&L Mild Steel Screw Bolts (Machine made) with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, Length of Bolt exc. 225mm but not exc. 300mm and Dia of Shank 16mm to 20mm, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridge/Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

M&L Exposed Suspended False Ceiling System with Aluminum anodised Snap Grid/ Frame Work of Size 605x605mm, all as per Specification and Drawing of MES Schedule (except Hangers), complete all as specified and as directed.

S&F Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards 4.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregates) 75mm thick in Sub-base Flooring, etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) 100mm thick in Sub-base Flooring, etc., complete all as specified and as directed.

M&L Glass Dividing Strip 38mm Wide and 3.0mm thick and inserted in Position, conform to Design, complete all as specified and as directed.

M&L Non-skid Ceramic Coloured Joint Free Tiles (1st quality and as approved) 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.38 Sqm in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE: Cost of Screed Bed is deemed to be included in the Quoted Unit Rate.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without using Extra Cement, complete all as specified and as directed.

M&L Bitumastic Filling comprising 1 Part of Bitumen of Grade 85/25 and 3 Parts of Sand by Weight, complete all as specified and as directed.

M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick/PCC Blocks or Concrete Works including mixed with WPC, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound will be Measured and Paid separately under appropriate Item.

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Old Plastered Surfaces of Walls and applying Two Coats of White Wash, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing New or Old Plastered Surfaces of Walls and applying Wall Care Putty 3.0mm thick in Two Coats (1.5mm thick in Each Coat) on Plastered Surfaces of Walls including Cutting and Rubbing down to obtain an Even and Smooth Surface, complete all as specified and as directed.

M&L Applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening (Priming Coat) on Putty Finished Surfaces, complete all as specified and as directed.

M&L Preparing Newly Plastered Surfaces of Walls and Applying Two Coats of Cement Based Paint (of approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Complete Removal of Existing Surface Treatment on Walls and Applying Two Coats of Cement Based Paint (as approved Tint) over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and Applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any descriptions, over 10 Cm in Width or Girth and Applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Old Rusted Steel and Iron Surfaces of CGI Sheets on Roofing, Walls, etc., over 10 Cm in Width or Girth and applying a Coat of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint), complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings/ Connections, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings/ Connections, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type, with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Valve (Straight or Angular) 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Cock/ Valve 15mm bore (dia), Concealed Type, Regular Body with Adjustable Wall Flange and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR, Cat No. CON-083KN or Equivalent Model in Make : HINDWARE/ MARC/ PARRYWARE (as approved by GE).

S&F Gun Metal Globe/ Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule and Providing Water Connections with and including GI Tank Nipple 20mm (2 No. on Each Tank), complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Gram, high pressure with Epoxy Coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.

M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts and Making Good to Floor/Distrubed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed

S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminium anodised Hinging Device and Fixed-in-repairs, complete all as specified and as directed.

S&F Hand Shower (Health Faucet) ABS Chromium Plated (as appproved) with 8.0mm bore (dia) Flexible Tube 1.0 Metre long and Wall Hook and Fixed-in-repairs, complete all as specified and as directed.

S&F Jet Spray (as approved) Chromium Plated with Connection Pipe 15mm bore (dia) and suitable for Wash Down Water Closet Pan (Pedestal Pattern) and Fixed-in-repairs, complete all as specified and as directed.

S&F Toitet Paper Holder of Size 150mm (as approved), Chromoum Plated with Rod to hold Paper Roll and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) for suitable Length, a Pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Wash Hand Basin 450x300mm in Size, Flat Back including Brass Chromium Plated Waste Coupling/ Fitting 32mm bore (dia) of 80mm Long and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly Painted, Cutting and Pinning in Ends and Fixed including Making Good disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Brass Chromium Plated Bottle Trap 32mm bore (dia) suitable for Wash Hand Basins with Inlet & Outlet, screwed for Pipe or Connections including necessary Packing, Union, Cap, etc. and Fixed-in-repairs, complete all as specified and as directed

S&F Brass Chromium Plated Wash Hand Basin Mixture for mixing Hot & Cold Water including all necessary Arrangement, etc., suitable for fixing to Steel Pipe 15mm bore (dia) and Fixed-in-repairs, complete all as specified and as directed. MAKE : HINDWARE/ JAQUAR (CONTINENTAL)/ MARC/ PARRYWARE

S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for Connecting with Flushing Cistern, Wash Hand Basin, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F Corner Glass Shelf with Bracket, fixing to Walls with Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR, Cat No. ACN-1173 or Equivalent Model in Make : HINDWARE/ MARC/ PARRYWARE (as approved by GE)

S&F Brass Chromium Plated Wall Mixture for Shower for mixing Hot & Cold Water suitable for fixing to Steel Pipe 15mm bore (dia), complete all as specified and as directed. MAKE : PARRYWARE, Cat No. G3118A1 or Equivalent Model in Make : HINDWARE/ JAQUAR (CONTINENTAL)/ MARC (as approved by GE).

S&F Overhead Shower Rose of Size 150x150mm Square, Single Flow (ABS Body, Chromium Plated with Grey Face Plate) having Rubit Cleaning System along with Shower Arm 190mm long, Chromium Plated, Flat Shape for Wall mounted Shower with Flange and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR, Cat No. OHS-35495 for Shower Rose & Cat No. SHA-CHR-483 for Shower Arm or Equivalent Model in Make : HINDWARE/ PARRYWARE / MARC (as approved by GE)

S&F Soap Dish not less than 100mm in size (as approved) Chromium Plated and fixing to Walls with Screws and Fixed-in-repairs, complete all as specified and as directed.

S&F Brass Chromium Plated Towel Rack 60 Cm long with Lower Hangers, fixing to Walls with Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR, Cat No. ACN-1181N or Equivalent Model in Make : HINDWARE / MARC/ PARRYWARE (as approved by GE)

S&F PVC (SWR) Floor Trap having Diameter of Outlet 75mm, Plain with Grating including Jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Pipe 75mm bore (dia), Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid on Floors, etc., complete all as specified and as directed.

S&F PVC (SWR) Vent Cowl 75mm bore (dia) and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Pipe 110mm bore (dia), Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid on Floors, etc., complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches, complete all as specified and as directed. NOTE : Necessary Earthwork will be Measured and Paid for separately under appropriate Items.

S&F PVC (SWR) Bend 110mm bore (dia), any Radius, etc. and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Junction Single (Single T) Equal or Unequal, and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) Reducers 110mm bore (dia) and Jointing with Solvent Cement, complete all as specified and as directed.

M&L Cutting into Existing Manholes for Connecting New Drain Pipe of 110mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregates), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Taking down carefully Point Wiring (Light, Fan, Socket/ Power) complete from in any Position including Fixture/ Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets but excluding Light Fittings of any description, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including Providing Surface Treatment (White/Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

M&L Taking down Unserviceable Sub-main Wiring from PVC Conduit/ PVC Casing Capping of any description, Making Good disturbed surfaces of Walls/ Ceillings, etc. in Cement Mortar 1:3 including Providing Surface Treatment (White/Colour Washing, Distempering, Painting, etc.) wherever required to match the Existing Finishes, complete all as specified and as directed.

Taking down Unserviceable Service Connection Cable and Connected Items of any description and from any Situations, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3/5 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including Concealed PVC Conduit (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN/ BELL POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including Concealed PVC Conduit (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. for ONE 3/5 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including Concealed PVC Conduit (ISI Marked) of suitable Size (approx 25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed.

M&L Sub-main Wiring with 2-Run of 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn in and including Surface/ Recess PVC Conduit (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc, complete all as specified and as directed NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Conduit will deemed to be included in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wires required/ as ordered for looping, etc. will deemed to be included in the Quoted Unit Rate.

M&L Sub-main Wiring with 2-Run of 6.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn in and including Surface/ Recess PVC Conduit (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc, complete all as specified and as directed NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Conduit will deemed to be included in the Quoted Unit Rate and the same will be Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wires required/ as ordered for looping, etc. will deemed to be included in the Quoted Unit Rate.

S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Switch Piano 46 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Socket Outlet 04 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Switch Socket Combination 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Switch Socket Combination 08 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Switch Socket Combination 6/16 Amp, 3 Pin, 2-in-1, Multi-plug, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Switch Socket Combination 04 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Ceiling Rose 46 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Ceiling Fan Regulator, Stepped type, Electronic, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Fan Regulator 08 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Bell Push 6 Amp, Single Pole, 1-way, Piano Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Bell Push 04 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F Buzzer Ding Dong, Single Pole, 230 Volt AC and Connecting up, complete all as specified and as directed. NOTE : Old Unserviceable Buzzer 04 No. obtained from Taking down of Point Wiring will be catered under Schedule of Credit.

S&F LED Bulkhead Light Fitting 1x10 Watt with LED Light Driver Holder, Connecting up with and including suitable Size and Length Flexible Copper Conductor Cable, 3 Core from Ceiling Rose to Light Fitting including Taking down/ out Unserviceable Light Fitting (03 No.), complete all as specified and as directed.

S&F LED Light Fitting 10 Watt, 2 Feet, Wall mounted type with High Out put Diffuser, 220 Volt AC, Decorative type with Driver Holder, LED Lamp, Connecting up with and including suitable Size and Length Flexible Copper Conductor Cable, 3 Core from Ceiling Rose to Light Fitting including Taking down/ out Unserviceable Light Fitting (04 No.), complete all as specified and as directed.

S&F LED Light Fitting 1x20 Watt, 220 Volt AC, Decorative Box type with Driver, Holder including LED Tube, Wall mounted, Connecting up with and including suitable Size and Length Flexible Copper Conductor Cable, 3 Core from Ceiling Rose to Light Fitting including Taking down/ out Unserviceable Light Fitting (10 No.), complete all as specified and as directed.

S&F LED Luminaire 600x600mm 35/36 Watt, (3000K to 6000K), 220 Volt AC, Recessed type with High Efficiency PMMA Diffuser Soft Glare Free Light, having IP-65 Protection with Driver, Holders and LED Lamp suitable for Roof Ceiling, Connecting up with and including suitable Size and Length Flexible Copper Conductor Cable, 3 Core from Ceiling Rose to Light Fitting including Taking down/ out Unserviceable Light Fitting (08 No.), complete all as specified and as directed.

Taking down Ceiling Fan, Exhaust Fan of any Make and Sweep from any Height after disconnecting Electric Connection and Keep in Safe Custody for Re-fixing / Re-hanging, complete all as specified and as directed.

M&L Transporting Ceiling Fan of any Make and Sweep from Site of Works to nearest Workshop, Opening Fan Cover for Taking out burnt Winding of any description, Cleaning Slot, Rewinding Fan Motor with Super Enamalled Copper insulated Wire of suitable Gauge and Weight (as per existing), Providing necessary Insulation Materials, Varnishing, Heating, Reassembling & Testing for Smooth Functioning after Rewinding, Removing the Repaired Fan to Site of Work after Rewinding, complete all as specified and as directed.

M&L Preparing Old Painted Surfaces of Ceiling Fan, Exhaust Fan of any Make and Sweep/ Size including Cleaning, Washing, Rubbing and Filling Cavities with Filler, applying One Coat of Synthetic Enamelled Paint (as approved) with Spray Painting Machine and Writing MES No. with Black Paint, complete all as specified and as directed.

M&L Mild Steel Flat Iron 40x5mm in Fan Hook, Cut to Length, bent to Shape as ordered, drilling holes for Bolts including providing Mild Steel Bolts, Nuts and Washers, conforming to Fe-290 Gde-E-165 including Taking down Unserviceable Fan Hook (08 No.) of any description, complete all as specified and as as directed.

M&L Re-hanging Ceiling Fan or Re-fixing Exhaust Fan (obtained from BOQ Item No. 2.025 here-in-before) and Connecting with and including suitable Size Twisted Flexible Copper Conductor Cable from Ceiling Rose to Connector of the Fan, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Curve, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB (08 No.) of any description, complete all as specified and as directed.

S&F MCB 10 Amp to 32 Amp, Single Pole & Neutral, 'C' Curve, 10 kA, 240 Volt and Connecting up including Taking down/out Unserviceable MCB (07 No.) of any description, complete all as specified and as directed.

S&F MCB 40 Amp, Single Pole & Neutral, 'C' Curve, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used SPN 2-way, 240 Volt AC, Single Door, Epoxy Based Powder coated and Connecting up including Taking down Unserviceable Sheet Metal Enclosure for DBs (04 No.) of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used SPN 4-way, 240 Volt AC, Double Doors, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure (02 No.) of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-way, SPN, 240 Volt, Single Door, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up including Taking down Unserviceable Sheet Metal Enclosure (01 No.) of any description, complete all as specified and as directed.

S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-way, SPN, 240 Volt, Double Doors, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.

Supply & Laying or Fixing or Passing through Pipe, 1100 Volt grade Heavy duty Cable with PVC insulated Aluminium Stranded Conductor served with an Inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC sheathed 10 Sqmm Nominal Cross Section, 2 Core in Service Connection, complete all as specified and as directed.

M&L Street Light Fitting Bracket made out from GI Pipe 32/40mm Bore (dia), Light Grade, not exc. 1.20 Metre long, bend to required shape and fixing to Poles, Walls, etc. with and including Mild Steel Flat Iron Clamps 40x5.0mm of suitable Length, 2 No. Nuts, Bolts, Washers, etc. including Painting with One coat of Red Oxide Zinc Chrome Primer and Two coats of Aluminium Paint to all Mild Steel Works, complete all as specified and as directed.

S&F LED Security Light Fitting 35/36 Watt, New Generation, Environmental Friendly, Energy Saving, Long Life, made up of Pressure Die-cast Aluminium Housing with High Power LEDs as Lighting Source and Lens embeded PC Cover having Top Opening, with separate Driver Compartment, IP-65 protected, Impact Resistance of IK-07, Electrically connecting up with and including suitable Size and Length 3 Core PVC Flexible Twisted Copper Wire, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregates) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregates), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing including Taking down/ out Unserviceable Earthing of any description (01 Set), complete all as specified and as directed.

M/s PRABIR ENTERPRISE

Prova Stores

M/s United Builders

kabitaconstruction

M/S Build Tech

M/s JK Jangid and Company

M/S R & R D ENTERPRISES