CA NO GE/ND-60/2022-23 REPAIR/ MAINT OF CERTAIN ITEMS OF JOINERY , ALUMINIUM DOORS, WINDOWS, FALSE CEILING IN CERTAIN BLDGS AND PERIODICAL SERVICES AND WELCOME MAINT OF MD/ SINGLE OFFRS QTR, MD JCOS/ ORS QTR AT ABH MESS UNDER GE NEW DELHI

Amount

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each (Except PVC chowkhats).

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sqm each (Except PVC chowkhats).

Taking down PVC chowkhats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sqm each.

Taking down shutters of any description n. exc. 1.00 sqm each.

Taking down shutters of any description exc. 1 sqm and next 2 sqm each .

M&L for plain Solid, straight chowkhats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F pressed steel frames for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F for stainless steel fastener of size 200 to 250mm for fixing wooden door frame and like in position

M&L for MS flat iron as in hold fast, bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains, hand made sliding bolts; clamps; hold fasts; wall ties, hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two-way and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 all as specified and directed.

M&L for PCC 1:2:4 type B-1 (20mm graded agg) as in anchoring hold fast, windows cills, jambs and similar work etc bed plate etc all as specified and directed.

M&L for 2nd class hard wood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkhats, sizes of members of shutters as specified and directed.

M&L for 2nd class hard wood 30mm thick glazed and skeleton window and ventilators shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkhats, sizes of members of shutters as specified and directed.

S&F for 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter all as specified and directed.

S&F for 35mm thick plain framed, panelled shutter (two panel) 2nd class hard wood with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering both faces. The size of rail and stile as per IS : 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F for aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors all as specified.

M&L for Solid PVC Door frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing.

S&F for factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing.

Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work or beads etc.

M&L in repairs Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails.

M&L for beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc,. and removing old beads as in repairs.

S&F for aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified.

S&F in repair for aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified.

S&F for aluminium anodized barrel tower bolt of 150 mm length of extruded section complete all as specified.

S&F in repair for aluminium anodized barrel tower bolt of 150 mm length of extruded section complete all as specified.

S&F for aluminium anodized barrel tower bolt of 100 mm length of extruded section complete all as specified.

S&F in repair for aluminium anodized barrel tower bolt of 100 mm length of extruded section complete all as specified.

S&F for aluminium anodised sliding door bolt, of size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified.

S&F in repair for aluminium anodised sliding door bolt, of size 250mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified.

S&F for aluminium alloy anodised sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified.

S&F in repair for aluminium alloy anodised sliding door bolt, of size 200mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified.

S&F for stainless steel butt hinges of size 75mm fixed complete all as specified.

S&F in repair for stainless steel butt hinges of size 75mm fixed complete all as specified.

S&F for stainless steel butt hinges of size 100mm fixed complete all as specified.

S&F in repair for stainless steel butt hinges of size 100mm fixed complete all as specified.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanized ,Width of flap (when open), 40 mm complete all as specified.

S&F in repairs Double action spring hinges, of size 150mm, mild steel with steel wire spring, stove enamelled , black,

S&F for 300mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate including welding work complete fixed to pressed steel frame complete all as specified. .

S&F in repairs 300mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate including welding work complete fixed to pressed steel frame complete all as specified. .

S&F for Aluminium handles, cast type, anodised 100 mm long, fixed , all as specified and directed.

S&F in repairs Aluminium handles, cast type, anodised 100 mm long, fixed , all as specified and directed.

S&F Aluminium handles, cast type, anodised 150 mm long, complete all as specified and directed.

S&F in repair Aluminium handles, cast type, anodised 150 mm long, complete all as specified and directed.

S&F 40mm dia, cup board knobs brass polished with nut, screw and washer complete all as specified.

S&F in repair 40mm dia, cup board knobs brass polished with nut, screw and washer complete all as specified.

S&F in repair hasp and staples, size 100mm/150mm, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S&F for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

S&F in repair Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples

S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples.

S&F in repairs aluminium door seal upto 1200 mm long on bottom of door,

M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L for welded steel wire fabric weight N. exc. 4 Kg/sqm supplied and fixed complete to wood or steel members with ends shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work

M&L including taking down for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F including taking down door closer aluminium extruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L for welding in repairs exc. 2.5 cm but n. exc. 5 cm in length, thickness of metal to be welded exc. 6mm but not exc. 9mm thick complete all as specified and as directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with screws to timber frame, fixed in repairs etc

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood lipping all-round incl polishing to lipping and all as per specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood lipping all-round incl polishing to lipping and all as per specified and directed.

M&L for 18/19 mm thick PVC solid both side prelam celluca plyboard for cabinet boxes & shutter , cup boards, showcase etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement.

M&L for 18 /19 mm thick block board, grade -2 quality, interior grade, commercial type fixed with screw to timber frame work as in CB shutter, shelves etc with 6 mm thick teak wood lipping all-round incl polishing to lipping all as per specified and directed.(fixed in repairs)

Taking down cement plaster from brick/stone walls including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed.

M&L for premix/ready-mix plaster 15mm thick on brick or concrete surfaces of walls in CM 1:4 finished even & smooth without using extra cement over a coat of UltraTech seal and dry 5 plush as bonding agent including necessary form work safety precaution up to six storey bldgs. complete all as specified & directed.

M&L applying two coat of oil bound distemper over & incl. 2 coat of wall care putty to provide silky smooth finish after preparation of new or old undecorated plastered wall surface complete surface finished the smooth surface of walls.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clip complete all as specified and as directed.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sqm in each pane.

S&F Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares exceeding 0.5 Sqm in each pane.

S&F Glazing with 5.5mm thick sheet glass, ordinary quality, of any size including grinding of edges for showcase sliding shutter and shelves incl fixing brackets complete .

S&F Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sqm in each pane.

M&L for solar control film 50 micron reflective type sticked to glass pane as per instructions of manufacturers exceeding 1.5 sqm complete all as specified and as directed.

Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer.

M&L for Treating ends of posts, back of chowkhats etc area tarred exceeding 0.1 Sqm but not exceeding 0.5 Sqm each including preparation of surfaces of wood and wood based material, steel and iron work and treated with tar or coal tar black paint.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar .

M&L for Brick work with sub class" B " bricks straight or curved on plan to any radius brick thick wall built in CM 1:4.

Dismantling wrought iron or mild steel work of any description not otherwise provided for as in grills, framed railing etc.

S&F in repair pre-laminated PVC rigid foam sheet wall panelling of PVC sheet 1.15 x 595 and 5 mm thick stuck on inner frame work of 50 mm wide strips of 3.5Rmx30 mm thick rigid foam sheet. The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 600 mm C/C. The PVC strips to be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasters .

M&L for Providing & injecting chemical emulsion at points of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltrs per hole by drilling holes at a down ward angles of 45 degree at 150mm center to center & sealing to same.

Dismantling of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering all as specified

S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F including taking down powder coated aluminium window using 63 mm X 38 mm X 1.6 mm chowkhats with 48mm X 48 mm X 1.6mm openable section as in shutter including ornamental aluminium grill, 5.5 mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100 mm -02 Nos, tower bolts 100 mm 02 Nos, hooks and eye – 02 Nos 150 mm , butt hinges 100 mm 04 Nos etc complete all a specified and directed by Engr-in-Charge.

S&F including taking down Powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails including mortice lock vertical type mild steel 100 mm size 02 Nos tower bolt 200 mm , sliding bolt 300 mm long 01 No, door handles 200 mm 2 Nos, aluminium butt hinges stainless steel 125 mm 04 Nos, hydraulic door closer heavy duty and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter next 1.00 mtr in width Make of glass (MODI/FLOAT/ATUL).

S&F including taking down for aluminium anodized grill of bar size 6.25mm with square size 100mm fixed with suitable channel section complete all as specified & Directed.

S&F including taking down powder coated aluminium partition next 1.20 Sqm in each panel using 95.6 mm x 44.8mm x 1.6mm frame work with 12 mm thick exterior grade veneered particle boards with decorative veneers on both faces/6 mm thick frosted glass as directed by Engr-in-Charge including aluminium beading for fixing board (GLASS Make MODI/ FLOAT/ ATUL).

S&F 25 to 32 mm dia decorative powder coated drapery rod in assorted sizes, colour as approved including a pair of end brackets/finials, fixed to masonry/ concrete walls as required. Note : The provision of finial/end cap shall be as per site requirement and as directed. The cost of end cap/finial shall be deemed included in the per running meter cost as per the size of door / window.

S&F easing and adjusting aluminium doors incl replacement of small articles like rubber gaskets , aluminium beads screws etc incl taking down and refixing in same opening.

S&F in repairs chromium plated/ stainless steel body mortice lock vertical type size 100 mm MS 4 lever

Dismantling ceiling boarding/wall panelling board any description, fixed in any position with screw and removing rubbish out of MoD land complete all as complete all as directed.

M&L for anodised aluminium snap grid frame work for false ceiling all as specified

M&L 12 mm thick perforated particle board/tiles for insulation and acoustic purpose,60X60cm in size fixed with nail timber frame or snap grid

M&L for decorative fabric vertical blinds/louvers with complete fittings and fixtures channel or rails are made from high quality fabrics with strips or louvers, hang from the head rail and linked by chain at the bottom. Vertical blinds have two control. One allows the blind louvers to be tilted to the left or right and block the light out, let it in, or filter it by tilting the louvers to an angle and other one lets louvers fully black by pull either to the left, right or centre all blinds come with head rail with match to all component with complete accessory all as specified and directed. (complete fittings measured and paid in Sqm based on open area covered by blinds)

M&L providing and fixing Gypsum Board 12mm thick any size in ceiling fixed with screw to GI frame work such as ceiling application with sag resistant, superior finish by Gyproc jointing materials produced durable joint reinforcement and a smooth, continuous, crack-resistant surface ready for priming and final decoration firmly bonded with strong liners acoustic purpose in S/E and T/E edge type fixed with screw, nail timber frame or snap grid as per manufacturers instructions complete all as complete all as directed

S&F Gl frame work for fixing of Gypsum board (any size) seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as complete all as directed.

S&F 12 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape drilling holes required for fixing for wood panel top and bottom portion of the doors where as requirement at site with all fittings, stainless steel plates, locks, screws, bolts and nuts

S&F steel window/ventilator Z sec with side hug shutter factory made including projecting type hinge with steel handle and steel peg stay etc. complete with glazing bars complete confirming to Fe 410-0 and making good complete all as specified and directed.

S&F steel window/ventilator Z sec with side hug shutter factory made including projecting type hinge with steel handle and steel peg stay etc. complete with fly proof wire mess shutter dovetailed or welded complete confirming to Fe 410-0 and making good complete all as specified and directed.

M&L for preparation of old distempered on wall surfaces and applying one coats of distemper oil emulsion, white or tinted complete all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces, scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coats of distemper oil emulsion, white or tinted over one coat of alkali-resistant primer paint and 3mm thick wall care putty all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for preparation of old distempered surfaces of wall by complete removal of existing treatment from wall surfaces , scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coats of distemper oil emulsion, white or tinted over one coat of alkali-resistant primer paint complete all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for preparation of old distempered on ceiling surfaces and applying one coats of distemper oil emulsion, white or tinted complete all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for preparation of old distempered surfaces by complete removal of existing treatment from ceiling surfaces , scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coats of distemper oil emulsion, white or tinted over a coat of primer paint compete all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L applying one coat of white wash on old decorated wall surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greasy spots complete all as specified and directed.

M&L applying two coat of white wash on old decorated wall surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greasy spots complete all as specified and directed.

M&L applying one coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greasy spots complete all as specified and directed.

M&L applying two coat of white wash on old decorated ceiling surfaces including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and greasy spots complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L applying two coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L applying two coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L applying one coat of cement base paint on old painted wall surface including preparation of surfaces complete all as specified and directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for preparation of old surfaces of walls by completed removal of existing scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coat of cement base paint complete all as specified and directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applied two coat of super quality weather proof exterior emulsion paint by complete removal of existing treatment surfaces over & incl one coat of primer from the same manufacturer on external walls / ceiling surfaces after preparation of surface all as specified by Engineer-in-Charge. Make :- Apex ultima from Asian, Acroguard 3X from Acro Paints or Equivalent. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L preparation of new plastered surfaces of wall of any description not otherwise described scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coat of super quality weather proof exterior emulsion paint over & incl one coat of primer from the same manufacturer on external walls / ceiling surfaces after preparation of surface all as specified by Engineer-in-Charge. Make :- Apex ultima from Asian, Acroguard 3X from Acro Paints or Equivalent. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L applying three coats of white wash on newly plastered surfaces of walls including preparation of surfaces by brooming down etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall of any description not otherwise described scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coats of cement base paint complete all as specified and directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for premix/ready-mix plaster 15mm thick on brick or concrete surfaces of walls in CM 1:4 finished even & smooth without using extra cement over a coat of UltraTech seal and dry 5 plush as bonding agent including necessary form work safety precaution up to six storey bldgs. including necessary scaffolding, framed work and safety precautions complete all as specified & directed.

M&L for one coat of super quality weather proof exterior emulsion paint over external walls / ceiling surfaces after preparation of surface on old surface all as specified by Engineer-in-Charge. Make :- Apex ultima from Asian/ Acroguard 3X from Acro Paints (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for preparation of new wall surfaces plastered scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coats of distemper oil emulsion white/tinted over one coat of primer complete all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for preparation of new plastered ceiling surfaces scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coats of distemper oil emulsion white/tinted over one coat of primer complete all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for applying three coats of white wash on ceiling surfaces including preparation of new plastered surface complete all as specified and directed.

M&L for French polishing with one or more finishing coats on old polished wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted brick, stone, concrete surfaces n exc. 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

S&F ceramic glazed tiles with printed letter in English alphabets of size not more than 150mm high, size of tiles not less than 150 x 150 mm suitable for house numbers including fixed on vertical surfaces in 10 mm thick cement mortar 1:4 and finished with colour cement to match with existing wall surfaces, tiles shall be fixed over entrance door of house including dismantling existing tiles with cement mortar bedding (but not backing) complete all as specified & directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided as in balcony kerbs incl removing the unserviceable material out side the MOD land complete all as specified & directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops,PCC band for railing, gola including necessary form work required for the work rounded or chamfered on edges complete as directed.

M&L uprooting plants (girth next 15 cm of trunk to any of plants grown along the pipes or walls chajjas, parapets and roof of building and making good the surface as per existing surface and pouring acid not less than 100ml for each plant in the roof to avoid further growth as directed. Note:-Work has to be executed in multi storey bldgs. upto 25 Meter height

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing, and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of latex with 4 part of water and 6 part of cement by weight, coverage of latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 Mpa, After this, providing 40 mm (average thickness) guniting mix @ pressure 2.2 to 2.5 kg per sq.cm with anti corrosion admixture (using 1 part of ordinary Portland cement 43 grade and 2 part of Ghaggar sand mixed with adhesive/admixture at the rate as per manufacturer instruction and as directed) including stripping floating with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guniting to be finished fair with 10 mm thick plaster in Cement Mortar 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc. all as specified & directed at site. (All services and work, scaffolding, safety precautions including internal and external surfaces and members of six storey building).

Providing and fixing rebar of required length & diameter with Sika anchor fix R-3+/Mungo/Fischer FISV 390/Hilti RE-500 Epoxy resign where ever required in RCC members including power drilling, cleaning of holes then rebar shall be inserted in holes that shall be fixed with epoxy to ensure the bond as per manufacturers recommendation complete as per site requirement and direction of Engineer-in-Charge of 100 mm deep(minimum), 16 mm dia hole suitable for inserting 12 mm dia reinforcement bars (All services and work, scaffolding, safety precautions including internal and external surfaces and members of six storey building).

Providing and fixing rebar of required length & diameter with Sika anchor fix R-3+/Mungo/Fischer FISV 390/Hilti RE-500 Epoxy resign where ever required in RCC members including power drilling, cleaning of holes then rebar shall be inserted in holes that shall be fixed with epoxy to ensure the bond as per manufacturers recommendation complete as per site requirement and direction of Engineer-in-Charge of 100 mm deep(Minimum), 12 mm dia hole suitable for inserting 08 mm dia reinforcement bars (All services and work, scaffolding, safety precautions including internal and external surfaces and members of six storey building).

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed by Engr-in-Charge.

Ditto as per item no 132 above here-in-before but 6 to 8 mm dia

M&L polymer modified cement bonding coat, prepared and applied on the concrete/masonry surface with 1 part of Sika latex with 4 part of water and 6 part of cement by weight. Coverage Sika latex 0.25 kg/sqm for one coat at all heights levels. Adhesive bond strength not less than 2.5 MPa. (Make :- Sika/BASE Fosroc/Dr Sunanda) including chipping of the loose concrete all as directed by Engineer-in-Charge..

M&L for laying Micro-concrete cement based pre packed single component, chloride free, sulphate free, non shrink, free flow, self compacting, ready to use after mixing water in specified proportion of approved quality. The unit rate shall include the cost of form work for providing micro concrete patch repair as required at site with steel jack system and steel props to support the form work in this application of high strength, dual shrinkage, compensated, micro concrete for placing in nominal thickness of 50 mm to 150 mm for concrete repair. Make:- Sika/BASE Fosroc/Dr Sunanda.

M&L for Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match existing surfaces including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match existing floor/skirting laid over screed bed or bedding layer/plaster in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing floor/skirting laid over 15mm thick screed bed or bedding layer/plaster in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for preparation of old surfaces of wall/ceiling by complete removal of existing treatment scrapping of surfaces shall be done by using mechanical sander with internal dust extraction system for clean environment certified by the manufacturer. After preparation of surfaces approval shall be obtained from Engineer-in-Charge before applying primer and further applying two coats of plastic emulsion paint, white or tinted over one coat of alkali-resistant primer paint and 3mm thick wall care putty all as specified & directed. (Note : - The specified work shall be applied using airless spray technology and capable operating single spray gun with a suitable hose length. The spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer uses. The equipment shall be certified by approved manufacturer).

M&L for Vitrified ceramic floor tiles light shade/coloured 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing floor/skirting laid over 15mm thick screed bed or bedding layer/plaster in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

A N BUILDERS