Supply, installation, testing and commissioning of Central Heating System along with allied works for 2nd and 3rd floor at District Hospital Shopian

Amount

Supply, Installation, Testing and Commissioning of

Hot Water Boiler

Hot water, Horizontal water tube/ fire tube boilers complete with water coils, combustion equipments, control panel, controls, accessories and 5 HP mono block pump set alongwith foundation as per OEM

Capacity each 4,00,000 Kcal/ Hr (1 stand by)

Boiler Chimeny

Chimney for 4,00,000 Kcal boiler 300 mm dia, with 200 mm dia flu gas duct extrenaly mounted support raising at 12m above the Ground Level.

Pumps

Hot water Circulation Pumps

Hot Water Circulation Monoblock Pump complete with electric motor of 05 HP rating alongwith common base frame duly grouted in cement concrete foundation. Suction 80 mm Delivery 65 mm

Capacity 600 LPM at 24 m Head

Oil Transfer Pumps

Gear Oil Transfer Pump with electric motor of 3 HP rating (Flame Proof) alongwith common base frame duly grouted in cement concrete foundation. Suction 50 mm Delivery 40 mm

Capacity 50 LPM

Softwater Pumps

Soft Water Pump complete with electric motor of 1 HP rating alongwith common base frame duly grouted in cement concrete foundation.

Capacity 50 LPM at 15 m Head

Tanks

Bulk Oil Tank

Bulk oil tank 20kl complete of 6/8 mm MS plate with manhole dully covered to be laid underground with allied Civil Works as per specifications and drawings

20000 litres, size 2.1 M DIA X 6 M long.

Mixing Tank

Hot water mixing tank made of 6/8 MM M.S. Plate with dished ends, manhole dully covered and necessary connections covered with 50mm thick glasswool insulation and finished with 24 Gauge Aluminium cladding and complete as per specifications and drawing with structural support to raise the tank at least 300 mm above finish FL.

3500 litres, size 1.3 M DIA X 2.65 M long.

Day Oil Tank

Day oil tank of 5 MM M.S plate complete with manhole dully covered, Gauge Glass 9 Kw Oil Heater, necessary connections and strucrural support for mounting oil tank and ladder made out of tubular MS Section complete as per specifications and drawing.

Capacity 990 litres, each size 1 m X 1 m X 1 m

Expansion Tank

Hot Water Expansion Tank of 5 mm M.S complete with manhole dully covered, necessary connections covered with 50mm thick glasswool insulation and finished with 24 Gauge Aluminium cladding and strucrural support for mounting Expansion tank

Capacity 700 litres, each size 0.9m X 0.9m X 0.9m

Soft Water Tank

Soft water tank of HDPE (tripple layer) with necessary connections

Capacity 1000 litres

Softener

Water Softening Plant having steel body with accessories viz softner pump, valve, requisite brine tank etc. complete in all respect alongwith cement concrete foundation.

Capacity 1500 litres/hr

Hot Water Radiators

Steel panel heating radiators with working pressure ranging from 10-13 bar having working temperature at 110 c ,complete with Top grilles and side covers as standard alongwith inlet valve, outlet valve, air purge valve and threaded plug as per OEM Inlet Water Temp: 75 Deg C Outlet Water Temp: 65 Deg C Room Temp: 22 Deg C

2000 Kcal/Hr (Double Panel Double Convector)

2500 Kcal/Hr (Double Panel Double Convector)

3000 Kcal/Hr (Double Panel Double Convector)

3500 Kcal/Hr (Tripple Panel Tripple Convector)

4000 Kcal/Hr (Tripple Panel Tripple Convector)

Piping

M.S. Piping

Above Ground

Mild steel ERW hot water piping of class ‘C’ complete with fittings etc as per specifications and drawings.

100 mm DIA

80 mm DIA

65 mm DIA

50 mm DIA

40 mm DIA

32 mm DIA

25 mm DIA

20 mm DIA

Under Ground

Mild steel ERW hot water piping of class ‘C’ complete with fittings etc to be laid underground in trenches at a depth of 450 mm below Ground level on cement concrete blocks at a distance of 3 m as per specifications.

100 mm DIA

M.S. Piping (Galvanised)

Mild steel ERW (Galvanised) water piping of class ‘B’ complete with fittings etc as per specifications and drawings.

25 mm DIA

Angle Iron Supports

Supports for hot water piping at various locations to be fabricated out of 4040x5 mm, 5050x5 mm, 6565x5 mm as per site requirement.

Hot Water Pipe insulation

Above Ground

Glasswool pipe sections of 80Kg/CuM density insulation along with chicken mesh and alluminium cladding of 26 Gauge as per specifications.

100 mm DIA

80 mm DIA

65 mm DIA

50 mm DIA

40 mm DIA

32 mm DIA

25 mm DIA

20 mm DIA

Under Ground

Glasswool pipe sections of 80Kg/CuM density insulation along with chicken mesh and tar felt as per specifications.

100 mm DIA

Underground/ Above Ground (Oil Line)

4mm thick pypekote insulation.

50 mm DIA

40 mm DIA

25 mm DIA

20 mm DIA

Valve

Butterfly Valve

100 mm DIA

80 mm DIA

65 mm DIA

Ball Valve

50 mm DIA

40 mm DIA

25 mm DIA

20 mm DIA

15 mm DIA

Non- Return Valves

C.I./G.M. Non Return Valve with Flanges etc. complete as per specification of the following sizes.

65 mm DIA (C.I. Flanged)

50 mm DIA (Foot Type, Threaded)

Y-Strainers

C.I./G.M. Y Strainer with Flanges etc. complete as per specification of the following sizes.

80 mm DIA ( Flanged)

50 mm DIA (Threaded)

Misc. Items

Pressure Gauges Glycerine fillied as per specifications (100 mm Dial)

Thermometer as per specifications (100 mm Dial)

Air release valves with isolation ball valves (20mm)

Electrical

Panel

Main Panel

Main Control Panel having separate cubicals for each equipment (viz. Hot Water Generator 2 No's, Hot Water Circulation Pumps 2 No's, Soft Water Pumps 2 No's, Softener pump 1 No, HSD Transfer Pump 2 No's and three empty) with main and individual switch gears for Hot Water Generator / Pumps and starters for Pumps, On-Load Change Over Switch (200 A), MCCB (200 A) . The control panel shall be provided with the Aluminium bus bars dully insulated of required ratings as per specifications

Cable Try

300 mm wide Perforated cable tray of 2 mm thickness and supported from ceiling the wall duly painted as per site condition

Conduits

MS conduit pipes

Electrical cable

Providing and fixing PVC insulated unarmoured copper conductor cables from main panel board to various equipments through walls/ceiling with appropriate clamps and fixing arrangements, cable tray etc. as per specifications

4 Core - 4 sqmm

4 Core - 2.5 sqmm

3 Core - 4 sqmm

2 Core - 1.5 sqmm

Earthing

Earthing Pit

Earthing for various equipments inside boiler house using copper plate electrode of size 500 x 500x 3 mm placed in 1000 x 1000x 1800 mm pit filled with charcoal & salt by copper strip of size 20 x 3 mm alongwith perforated G.I pipe as per specifications

Earthing Strip

Copper strip of size 20x3 mm from earthing electrode to the Panel, Stabilizer, boiler and pumps using proper fastners conceeled under floor.

GOOD LUCK TRADERS

MS GKS ENTERPRISES