Tender for execution of Development Works to Mahadeva Temple (Construction of Visitor Amenities and Sculpture Shed) at Ittagi for the year 2025-26

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and for all lift, etc complete all as per specifications and directions of site-in-charge.

Providing and laying base concrete below foundation for 100mm thick of cement concrete 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources), etc complete all as per specifications and directions of site-in-charge.

Providing and constructing of Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) up to plinth level with cement mortar 1:6 (1 cement: 6 coarse sand), etc complete all as per specifications and directions of site-in charge.

Providing and constructing of Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level Masonry work (first sort), in cement mortar 1:6 (1 cement: 6 coarse sand) etc complete all as per specifications and directions of site-in-charge.

Providing and fixing of M.S Grill on top of the dwarf wall/boundary compound wall including fabrication with MS angle 50 x 50 x 6 mm to a height of 1.30 mtrs. with 40 x 8 mm M.S Flat along with inserting 16 mm square bar with sharp edge, necessary fixtures, including cutting, welding, applying one coat primer and two coats of approved enamel painting to the grill including fixing, installing, etc complete all as per specifications and directions of site-in-charge.

Providing and laying of coping concrete on top of the wall 1:2:4 (1 Cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) etc complete all as per specifications and directions of site in- charge.

Providing and fixing of the MS gates at 5 locations with 50 x 50 x 6 mm angle iron and 16 mm square bar along with lifting, fixing and installation in stone pillar of 0.50 x 0.50 stone pillar including hinges, aldrops of necessary sizes, all fixtures, finishing etc complete all as per specifications and directions of site in-charge

Providing and applying of pointing to the stone joints pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) Flush/ Ruled pointing, etc complete all as per specifications and directions of site in-charge.

Demolishing the stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material away from the site etc complete all as per specifications and directions of site-in-charge.