Development of Hubballi Airport SH-Supply and Laying of Power Cable, Telephone Cable, OFC Cable and allied Electrical works for Glide Path and Localizer

Amount

Supply of XLPE insulated and PVC sheathed armoured aluminium conductor underground power cable of 1.1 KV grade of following sizes confirming to IS 7098 (Part-1) with up to date amendments etc complete as required a)3.5CX300 Sqmm

Supply of 12 core armoured single mode optical fiber cable confirming to IS standard

Supply of 10 pair 0.63 armoured Jelly filled Under ground Copper telephone cable confirming to IS standard

Supply of HDPE pipe of PN4 grade, PE 63 following size confirming to IS 4984-1995 125mm outer dia

Supply of HDPE pipe of PN4 grade, PE 63 following size confirming to IS 4984-1995 50mm outer dia

Laying of 125mm dia HDPE pipe, including drawing of power cable of 3.5CX300 Sqmm in HDPE pipe (excluding supply of HDPE pipe and Power cable) including excavation of trench and refilling the trech etc complete as required

Laying of 50mm dia HDPE pipe, drawing of Telephone cable(10 pair)/OFC cable(12 core) /3CX10Sqmm Copper Armoured cable in HDPE pipe(excluding supply of HDPE pipe, 3CX10Sqmm copper cable, OFC and Telephone cable) including excavation of trench and refilling the trech etc complete as required

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required a) Above 185 Sqmm upto 400 Sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing Masonary open duct as required a) Above 185 Sqmm upto 400 Sqmm

Laying of one number 12core armoured single mode optical fiber cable/ 10pair armoured Telephone cable in the existing RCC/ HUME/ METAL pipe as required

Laying of one number 12core armoured single mode optical fibre cable/ 10pair armoured Telephone cable on surface as required

Supplying and making straight through joint with heat shrinkhable including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1KV grade 3.5CX300Sqmm

Supplying and Making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed XLPE aluminium conductor cable of 1.1KV grade as required. 3.5CX300Sqmm

Making Horizontal boring of dia not less than 150mm by using suitable mechanical arrangement at different locations as per the site requirement and laying of 125mm dia HDPE pipe

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand:4 graded stone aggregate 20 mm nominal size) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60cm long and fixing the same in ground as required

Design, Manufacturing, Supply, Installation, Testing and Commissioning of outdoor type free standing floor mounted LT Panel of cubicle type made out of 14 SWG thick CRCA sheet, totally enclosed, IP 54, dust and vermin proof, indoor compartmentalized, suitable for operation on 3 phase and neutral, 415 volts, 50 hz, AC System with Bus bars, earth bar connections including internal wiring with suitable sizes wire/ cable, interconnection, duly powder coated, painting etc.The panel shall have provision for bottom cable entry, including supply and installations of following switchgears, metering instruments and accessories in the L.T. Panel and as per specifications. (As per details available in Tender Document)

Earthing with GI earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 mete below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nutbolt & spring washer spaced at 50 mm)

GST in %

Shree Tuuljai Electrical Pvt. Ltd

DOSHI ELECTRIC ENGG. CO.

SRI RAGHAVENDRA ELECTRICALS

Naagar Infrastructure Pvt Ltd

Shantha ELectricals and Engineers Pvt Ltd

Balaji Engineering

KR POWER INFRA INDIA PRIVATE LIMITED

MURTHY ELECTRICALS