Construction of 2 nos Urinal point Ladies and gents at Gate bazar jn. Back side of Ramjis Res. In WN - 17

Earth work excavation in ordinary soil in F&P within initial lead of 50 m and initial lift of 1.50 m including rough dressing and breaking the clods, etc all complete as per direction of engineer- in-charge.

Conveyance of excavated earth by mechanical means within 5km lead with loading and unloading the same etc complete

Supply and filling the F & P with filling sand of approved quality with well watered & rammed including cost, conveyance, royalty & all taxes, etc., complete.

Supplying all materials, labour, T&P for C.C. (1:4:8) using 40 mm size HG HAND BROKEN metal including laying, compacting, curing, with all cost, conveyance, royalty & taxes, etc., complete.

Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 23cm x 11cm x 8cm brick having crushing strength not less than 75 Kg / cm2

Brick work with flyash bricks 23cm x 11cm x 8cm size having crushing strength not less then 75 kg/cm2 in cement mortar (1:6) in superstructure including curing, cost and conveyance of all materials, etc.complete.

12mm thick cement plaster (1:6) on brick work including curing, cost & conveyance, royalty & all taxes, etc., complete.

Supplying M.S Grill Gate made out of M S Angle, MS Flat, MS Sqr bar and MS Sheet of approved design including cost of materials fabrication cost and delivering at work site.

Painting two coat with any approved paint with Priming one coat with any approved primer on new wood/Iron work etc complete.

S/F/F of ceramic floor tiles of premium grade having thickness 7mm to 8mm( 30cm x 30cm / 40cm x 40cm special plain / printed series )

S/F/F of ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm ( 30cm x 30cm / 40cm x 40cm special plain / printed series )

Priming one coat with any approved primer including the cost of labour & primer.

Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint

R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Data for 15 cum)

Supplying fitting and placing uncoated HYSD steel reinforcement including cutting bending binding and placing the steel rods in position with cost binding wire 18 to 20 gauge

Rigid & smooth centering & shuttering for R.C.C. and C.C. works including false works, dismantling and removing them from the site after casting, curing including cost of materials etc., complete.

Column upto top

Plingth beam

Lintel

Roof slab

Supplying fitting & fixing of Water supply and sanitary fittings with over head tank etc.complete