8518 REPAIRS TO FLOORING, ROOFING, FALSE CEILING, WATER PROOFING TREATMENT, SANITARY/ BATH FITTING/ PLUMBING, PLINTH PROTECTION, DRAIN, PATH FENCING, GATE ETC AT ZOZILA LINES (OFFRS/JCOS/OR MD ACCN) AND ELLIOT LINES UNDER GE (CENTRAL) PUNE

Amount

Dismantling asbestose cement (corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with coach screw complete all as specified and directed.

S&F asbestos cement two piece adjustable plain wing ridge 6mm thick fixed with coach screw complete all as specified and directed

S & F Roof tiles,mangalore Pattern,interlocking at side joints,laid dry etc including dismantling of single layer manglore pattern for similar tiles complete all as specified and directed by Engineer-in-Charge.

Dismantling of battens for tiles of any size including tilting fillets spacing exc. 15 cm and S & F Battens for tiles, shingles etc sectional area n exc 15sqcm of size including tilting fillets all as specified and directed by Engineer-in-Charge.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete S & F second class hardwood timber scantling clean sawn in framed work in roof members at 25cm centre section exc 40 sqcm complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantiling of sheets as in roofing/cladding as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws including dismantling of sheets in roofing/cladding as specified and directed

Demolition of un-reinforced cement concrete of any description and in any position in roof slab/sunken slab/ padding etc including removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregates) finished even and smooth using extra cement as in roof padding and similar items mixed with liquid water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only liquid water proofing compound

Demolition of cement concrete in ground floors and paving n exc 15cm (below or above groiund) and inclusive of removal of debris out side defence land complete

M&L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and Proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground and inclusive of removal of debris out side defence land or removal to store complete

Dismantling fencing wire mesh, any type and inclusive of removal to store complete

M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregates) in foundation, filling and mass concrete complete

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing barbed wire etc) including all necessary drilling, bolting or riveting, embedding in cement concrete, MS flat at bottom etc and similar work confirminng to Fe-290 Gde E-165 complete

S&F MS flats (40x5mm) as bands, straps, supports or stays for securing chain link fencing to angle iron posts and welded to post in PCC during embedding complete

S&F Mild steel screws bolts 11 to 15mm dia of neck (machine made) with hexagonal or square heads at one end and screwed at the other end, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long complete all as specified and directed by Engineer-in-Charge.

Supply only chain link MS galvanised fencing any size or type complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link, fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete

S&F in repair galvanised 2 strand, steel barbed wir 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossing with and provision of galvanised mild steel wie, staples or steel pins etc as directed each line wire to be measured) complete

M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete

Demolition of Pre-cast cement concrete block masonry with solid block and M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar,complete PCC (1:5:8) gde D-5 and setting in CM 1:6.

M&L for 15mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement including two coats of cement base paint over one coat of white wash on wall all as directed and specified.

M&L provinding cement concrete (1:2:4) B-1 as in copings / bearing course over brick walls etc and like complete all as specified.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc and M&L for 15mm thick rendering in CM 1:4 over plastered or concrete surfaces including two coats of cement base paint over one coat of white wash complete all as specified and directed by Engineer-in-Charge.

Demoiltion of precast cover slab for manholes and M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc

S&F portions framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

M&L for non skid ceramic coloured tiles 8 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete.

All as per item No 36 above but as in skirting / vertical surfaces over and including 10mm thick backing coat of CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete.

M&L for coloured glazed ceramic tiles of size 450x300x6 to 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick backing coat of CM 1:4 complete all as specified.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement primer of same make complete all as specified and directed.

M&L for preparing new plastered surface of walls and applying two coats of cement based paint over a coat of cement primer of same make complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick wall care putty including complete removal of existing treatment of any layer on wall complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparing old plastered or unplastered surface of walls and applying one coat of cement based paint complete all as specified and directed.

S&F in repair 15mm bore chromium plated bib cock fancy type. Make Jaquar cat part no:FLR-5047N or equivalent techno commercial model in KOHLER and ROCA.

S&F in repair 15mm bore chromium plated angle cock fancy type.Make Jaquar cat part no:FLR-5053N or equivalent techno commercial model in KOHLER and ROCA.

S&F in repair Brass CP wall mixer for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed.Make Jaquar cat part no:FLR-5281N or equivalent techno commercial model in KOHLER and ROCA.

S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete.Make Jaquar cat part no:OHS-1989 or equivalent techno commercial model in KOHLER and ROCA.

S&F in repair PVC connection 15 x 450mm.

S&F in repair 15mm bore chromium plated pillar cock fancy type.Make Jaquar cat part no:FLR-5015 or equivalent techno commercial model in KOHLER and ROCA.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade including taking up or down and connection including cleaning for refixing or removal to store all as specified.

M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade including taking up or down and connection including cleaning for refixing or removal to store all as specified.

Dismantling of water and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. Make Jaquar cat part no:ALD-CHR-577 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repair vitreous china pedestal pattern water closet white with including cast iron 'P' or 'S' trap, matching sheet cover and wall hung cistern with drainage pipe and connection to trap seat cover and . including making good to floor, complete all as specified. Make Jaquar cat part no: CNS-WHT-851 or Techno commercial equivalent model in KOHLER and ROCA.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets and 32mm dia 1mtr long PVC waste pipe.

S&F 15mm bore chromium plated concealed cock fancy type

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe)

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / walls complete

All as above item No 65 but 75mm bore

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

S&F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet M&L for 6mm thick non asbestos libre cement building ceiling board for false ceiling of size 600 x600x mm on GI powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, complete all as directed and specified

Parhar Enterprise (BID ID -3128834)

K S CHADHA AND SONS (BID ID -3129653)

M/s Asrani and sons (BID ID -3124124)

SARATH ENTERPRISES (BID ID -3128847)

M/S - R K CONSTRUCTIONS (BID ID -3129596)

ANIL CONSTRUCTION CO. (BID ID -3129210)

KSP ENTERPRISES (BID ID -3128868)

Suma Construction (BID ID -3129234)