SPL REPAIR TO COOK HOUSE OF BLDG 326 OFFRS MESS OF 27 MTN DIV SIG REGT AND PROVN OF SECURITY GATE 527 ASC BN AND 627 EME BN AND PROVN OF SECURITY FENCING ALONG EAST MAIN ROAD NEAR ASC ZONE AT KALIMPONG MIL STN

Amount

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or salimar pattern roof coverings.

Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal Complete all as per manufacturers specifications.

Dismantling wrought iron or mild steel work of any description.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches ,pillars etc but excluding ashler facing dressed stone work and precast concrete and directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200 mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE)

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces cement mortar 1:3 on concrete surface as in ceiling/chajja and RCC surfaces , to be finished even and smooth (without using extra lime or cement)complete all as specified.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L 15 mm thick rendering ( in two coats 10mm+5mm) on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compond all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on Brick/stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and fair (without using extra cement) complete complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coat of cement base paint complete all as specfied and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over 3mm thick wall care putty (Birla white or equivalent) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 sqm and n.exc 4.00 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F Pressed steel frames of size 165x60mm for doors with one or more rebated including necessary fixing lugs, hinges, lock strike plate etc., Complete as specified

S&F 35 mm thick second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F 35mm thick second class hardwood, Glazed and skeleton shutters, openrebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.

S&F 150 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L 350x 250x 7 mm or 450X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick rendering in CM (1:4) finished even and rough complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM (1:6) finished even and rough all as specified and directed.

M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded complete over and including 15 mm thick backing plaster in CM (1:4) finished even and rough all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Providing, cement concrete type B0 (1:2:4) (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L coloured vitrified tiles (300mmx300mmx10mm thick) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm screed bed in CM (1:4) complete all as specified and directed.

M/L for 15mm thick rendering in CM (1:3) on other than fair faces of brick or concrete surfaces finished even and smooth with WPC.(WPC measured separately).

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) and filling the grove with cement mortar (1:3) after tucking the felt and finishing/making good distrubed surface as required complete all as specified and directed.

M & L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, all as specifed and directed.

M & L for water proofing treatment with 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

Taking down, chipping and removing the loose spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement concrete ,wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface, wash with clean water for removing all rusts from the old reinforcement bar surfaces, fixing new reinforcement, cut to lenghts, bend to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia for stregthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of water, Nitbond SBR (Latex) and cement in ratio (1:1:3) slurry as bond coat after that applying ready mix polymer mortar, 30 mm average thick in any number of coats, to provide at least 30mm thick cover to reinforcement, finished the surfaces even and fair including erecting and dismantling scafolding for carrying out the work complete all as specified and as directed. Make of Epoxy Ready made Mortar and Epoxy chemicals -Fosrock/ Dr Fixit/ Sunanda/Sika. Note :- (i) New reinforcement will be measured and paid seperately (ii) Cost of fixing of new reinforcement by welding/binding with old reinforcement and providing, errecting and dismantling scaffolding shall deemed to be included in quoted rates.

S&F Welded steel wire fabric cut to length. Fixed to steel members/ reinforecement steel, weigh per Sqm n exc 4 Kg complete all as specified and directed.

M&L for mild TMT Steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of steel and iron surfaces of any description n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed.

Preparation of new wooden surfaces , not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint over one coat pink primer complete all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 20mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr - in - Charge.

Excavating in post holes (or similar holes) in loose / soft soil each n.exc 0.50 cum, getting out, returnining, filling in ramming earth or broken rubble mixed with earth around to layers n.exc 25 cm including removal of surplus soil to a distancen.exc 50 mtr and making good surfaces all as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Soft/loose soil complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in walls or retaining walls,any thickness,size or shape including pilasters etc complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as directed.

Supply and fix mild steel steel sections such as angle iron, flat iron etc for fencing posts and struts including cutting tops to shape, as directed, drilling holes, notching for wire etc flat iron fillets for securing wire mesh including all necessary drilling, bolting or revetting etc and similar work conforming to Fe -410-0 or Fe-310-0 complete all as specified and directed.

Supply and fix mild steel bolts, 12 mm dia and 50 mm long, purpose / machine made with hexagonal head or square hed one end and crewed on other end, each screwed end to be fitted with washer and on hexagonal or square nut all as directed.

Supply only chain link MS Galvanised fencing size or type made cut from GI wire 4mm dia gauge and 50 mm aperture weight not less than 4 kg / Sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh,size & type to any type of standards, rails straining bolts etc including provision of binding wire all as directed. NOTE: Chain link fencing shall be measured and paid as separately as supply only.

Supply and fix galavanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as directed. NOTE: Each line of wire to be measured.

Material and labour for 10 mm dia and over, round bars cut to length, bent to shape required including crancking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia all as specified and directed.

Excavation in trenches, nexc 1.5 m wide and nexc 1.5 m in depth, for foundation,etc or for shafts,wells ,cesspits,manholes,pier holesetc nexc 10 sqm on plan and iexc 1.5 m in depth and getting out in soft soil.

M&L for PCC type D2 (1:4:8) (40 mm graded aggregate) in foundation,filling and mass concrete all as specified and directed.

M&L for RCC M-20 (20 mm graded aggregates) in foundation,including,rafts,footing,foundation beams,plinth beams, bases for columns,etc basement slabs under reamed piles and mass concrete all as specified and directed by engr In charge.

M&L for RCC M-20 (20 mm graded aggregates) in column,pillars,piers,posts and struts all as specified and directed by engr In charge.

M&L for Mild steel bars 10 mm dia and over, cut to length,bent to shape required,including cranking ,bending spirally for hooping for columns,hooking ends and binding with and and including mild steel wire(annealed) not less than 0.9 mm dia or securing with clips all as specified.

M&L mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups spacers and binders all as specified and directed.

M&L for formwork to sides of concrete footings bases of columns all as specified.

M&L for formwork for columns all as specified.

S & F PVC false ceiling with light weight PVC hollow section panel made of 1mm thick and over all thickness of panel 7 mm thick and 200mm vide strip of plain coloured / melamine finish , fixed in new false ceiling grid made of Aluminum / G.I / M.S / wooden complete all as specified and as directed . Note : - New false ceiling grid of aluminium / GI / MS / wooden if provided shall be measured and paid separately.

S&F (Size of Grid 605x605mm) Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engr in charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified .

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed by Engineer-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161*-1979 grade St.240 all as specified and directed by engr in charge.

Returning filling in, including spreading,levelling, watering and well ramming in layers not exc 25cm as directed as specified.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point in hard soil.

M&L rendering 15mm thick in CM (1:4) inculding finished even and fair on brick or concrete surface.

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings and fixture (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of MS terminal boxes of suitable size with cover plate and frame for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces for one light point controlled by one, one way switch 5/6 Amps. complete all as specified & as directed.

All as per item No 88.00 here in before but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 88.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board.

All as per item No. 88.00 here in before but using 2.5 Sqmm size FRLSH copper conductor cable for one 16 Amp socket outlet on independent board.

Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.

Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat sink of 10W complete all as specified and directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC all as per specified and directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC all as per specified and directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Supply and fixing LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

M & L in repair for concealed sub main wiring with two runs of PVC insulated and unsheathed FRLSH copper conductor single core multi stranded of size 4.0 sqmm (for Phase and neutral) and one run of earth continuity conductor of size 4.0 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) with necessary fixing arrangements using approved colour coding as per IS drawn through 25mm mm PVC conduit concealed in wall/roo, bends, tee, elbow etc., and making good the disturbed surface complete all as specified and as directed. (Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length).

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, concealed in wall complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 40-63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified and as directed.

Supply and Fixing exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including all fixing arrangement complete all as specified and as directed.

Supply and fixing electric water heater storage type wall hanging mounting type with powder coated metallic body BEE 5 Star rated with diamond glass lined inner tank with maximum operating pressure of 8 bars incuding factory fitted thermostat maximum 75 Celsius with automatic thermal cutout and multifunctional saftey valve inculding suitable nuts & bolts for fixing arrangement operates on 230V ,maximum power consumtion -2kW of capacity 25 Ltrs , with all accessories and connection pipe 15mm bore 2 Nos for hot and cold water supply,geyser saftey cord with 16Amps ELCB complete including taking down old u/s Geaser & deposit to MES Store complete all as specified and directed. . Havells Cat Part No : Monza Nu GHWAMUSWH025 or equivalent Racold, Bajaj

Taking down water storage heater (Geyser) and keeping in safe custody of MES store for re-use, refixing the same with all accessories and necessary fixing arrangements complete all as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including non metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in pressed steel terminal boxes for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply and fix New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Complete all as specified or directed. Make- Havells Cat Part No : CORALMINIPT15WLED830PSYMTOPC or equivalent Philips, Crompton.

M&L for sub main wiring along with earth wire of size two run of 1.5 sq mm + one run of 1.5 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm non-metalic PVC conduit medium grade on surface of wall/roof complete all as specified or directed. (Note Three run of 1.5 Sqmm including one run of 25 mm of size conduit shall be measured as one unit length).

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

HEM RAJ GURUNG (BID ID -3364004)

MANOJ JINDAL (BID ID -3363988)

MOURICE CONSTRUCTION COMPANY (BID ID -3363253)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3363989)

PRASAD PRADHAN AND SON (BID ID -3363970)

RAMESH GURUNG (BID ID -3363971)

MS BRAHMA CONSTRUCTION (BID ID -3363969)