REPAIR TO JOINERY, PLUMBING, TILING, FALSE CEILING, PLASTERING, CERTAIN OTHER MISC WORKS AND PERIODICAL SERVICES TO CERTAIN BLDGS UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc all as specified and directed.

M&L for cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregates) 50mm thick as in sub base of flooring etc complete all as specified and directed

M&L for 75 mm thick cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for Virified ceramic tiles 10 mm thick ( square / rectangular polished, area of each tiles exc 0.36Sqm but n.exc .42 Sqm , in floor etc. set and jointed and incl 20mm thick screed bed in CM(1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and incl15mm thick screed bed in CM(1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed

M&L for glazed coloured ceramic tiles joint free coloured 450x300mm size 7mm thick on walls over and incl 10mm thick plastering in CM(1:4) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as directed.

M&L for old size Fly ash Brickwork, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for old size fly ash Brickwork straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and directed

S&F steel window with side hung shutters including side hinges, steel handle, and steel peg stay complete with glazing bars, dove tailed or welded all as specified and directed.

S&F 3mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and directed

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and directed

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joint together with solvent cement, etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and directed.

S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F of steel ventilator with top hung shutter including hinges, steel pegs stag complete all as specified and directed.

Taking down unserviceable Aluminium door/window shutters including taking out of all unserviceable parts, and repairing defective portion of shutters and refixing in the same opening complete all as specified and directed.

M&L for 100x100mm Size of mesh aluminium anodised grill of approved designs complete all as specified and directed.

M&L for Horizontal or vertical Venetian curtains with hand roller and all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing to complete all as specified and directed

Ditto all as per item No 32.00 here-in-before but 20 mm dia bore

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.

Ditto all as per item No 34.00 here-in-beforebut 20 mm dia bore pipes

Taking down cement plaster on brick or stone walls, ceiling/roof etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and directed. (Notes : WPC shall be measured and paid seperately)

Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410 W (Gde-E-250 quality - A) complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F Pre-painted coloured plain galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as roof ridge fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

S&F 6 mm thick Asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including, Nainital or similar pattern roof coverings

S &F galvanised, corrugated mild steel sheeting of thickness 0.63mm with two corrugation side lap fixed with L type or J type or cranked hook bolts in roofs , walls etc with frade of zine coating 275 complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation oards/slabs/ blankets, any thickness including cover fillets etc complete all as specified and as directed

S&F anodised aluminium snap grid frame work size of grid 605x605 for false ceiling all as specifed hangers 4mm dia GI (up to 1200mm length) adujsting level fixed to roof slab/ rafter/purlins by means of GI flat 40x3 mm size 60mm long and exception hold fasteners12.5mm dia 40 mm long complete all as specified.

M&L for non asbestos , fiber reinforced cement board ceiling, 4mm thick (610 mm x 610mm) all as per manufacturars instructionscomplete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on new ceiling board surfaces including surfaces preparation complete all as specified and directed.

Dismantling water tanks exc 250 ltr up to 1000 ltr and removing to store etc complete all as directed.

S&F rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

Cleaning and complete removal of all scales and dirts, silts etc. from tank and from mouth of circulating pipes etc. for capacity of tank 500 ltre and 1000litre including written as "Tank cleaned on DD-MM-YYYY' on the tank with white paint complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded or pointed in any mortar.

Demolition of Stone sett paving of any description of thickness

M&L for 25 mm thick sand cushioning including watering and consolidations etc., complete all as specified and directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and directed.

M&L for granite (of any type) stone slab 16 to 18mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc.,complete all as specified and directed.

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and directed.

Ditto all as per item No 62.00 here-in-before but 150 mm long

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and directed.

S&F 100 mm thick butt hinges, heavy weight, stainless steel and fixed etc complete all as specified and directed.

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and directed.

S&F in repair white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

S&F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repairs coloured vitreous china wash down water closet European type (Pedestal Pattern) white (excluding flushing cistern & flush pipe) incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and directed.

S&F urinal sensor with outomatic flusher complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed.

S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and directed.

S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

Ditto all as per item No 75.00 here-in-before but tap 2 in 1 of 15mm bore complete all as specified and directed. (Make : Marc or equivalent)

S&F in repair stop valves /angle valves fancy type chromium plated brass cast copper (Concealed type) alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F as in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Bathroom Cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall complete all as specified and directed. (Make : Prayag or Equivalent)

S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and directed.

S&F in repair for 75 mm bore out let cast floor trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) etc complete all as specified and directed.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repaircomplete all as specified and directed.

S&F in repair for 75 mm bore Cast iron soil, waste and vent pipes (spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and directed.

S&F in repair for 100 mm bore Cast iron soil, waste and vent pipes(spun pipes), in any length with or without ears with cement joints, laid in trenches or in floors or vertically cast, complete all as specified and directed.

S&F 75mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and directed.

S&F 100 mm bore cast iron Bends of (any radius), diminishing piecs or tapers (larger bore measured) complete all as specified and directed.

S&F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to under floor/walls complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR)bends with rubber rings joints fixed as required complete all as specified and directed.

Taking down unserviceable steel gate/shutter of any description of size exc. 9 Sqm but n. exc 12 sqm each including taking out of unserviceable parts/portion by cutting and replacing with new one as per the existing size and specification and fixing in the same opening by maintaining proper alignment including repairing defecting defecting portion of gate/shutter, steel structure to match with existing structure including necessary cutting, drilling, welding and reveting etc. greasing, oiling to movable parts including all necessary fittings and applying one coat of synthetic enamel paint over a coat of pink primer to new portin/structure complete all as specified and directed.

M&L for steel rolling shutters 1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete : push pull or manual type complete all as specified and directed.

M&L for steel rolling shutters 1.25mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete : but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F galvanised 2 strand barbed wire 2,24mm dia of wire with 2mm dia barbs at 75mm to 100mm spacings staining and fixing to any type of standard rails strainings bolts incl securing or trying at crossings with and provn of galvanised MS wire staples or steel pins etc complete all as specified and directed.

Supply only galvanised chain link fencing of size 100mm x100mm mesh made out of 10guage mild steel ganvanised wire complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts, etc including provision of binding wire etc complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer to new surfaces of steel of any description exc 10 cm in width or girth of steel including preparation complete all as specified and directed.

M&L 10mm dia mild steel round bars as straining bars to secure chain link fencing with fencing posts incl running welding to the ends of bars with overlapping not less than 10cm etc complete all as specified and directed.

Supply only water proofing compound (Liquid) complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfaces by broming down or steel wire brushing scrapping down smoke soot, mould, moss and effloresent salts and trading oil and greasy sports and applying one coat of white (lime) wash on walls all as specified.

M&L for preparation of new plastered surfaces of ceiling and applying three coat white wash complete all as specified and directed.

M&L for preparing new plastered surface of ceiling surface and applying two coats of white wash etc complete all as specified and directed.

M&L for preparing new plastered surface of walls with 1mm thick Birla/Asian wall care Putty and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and directed.

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etccomplete all as specified and directed.

M&L for preparation of old painted wooden surfaes of any description not otherwise described not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old painted wooden surfaes of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Preparation of old painted steel and iron surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Ditto all as per item No. 109.00 here in before but not exceeding 10 cm width or girth.

M&L Preparation of old plastered surfaces of walls and applying one coats of oil bound distemper complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M&L Preparation of old plastered surfaces of walls with complete removal existing treatment and applying two coats of cement base paint over a coat of white cement primer complete all as specified and directed.

M&L for preparation of old wall painted surfaces and applying two coats of plastic emulsion paint over a coat of primer with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old wall painted surfaces and applying two coats of appex paint over a coat of primer with 1mm thick wall care putty complete all as specified and directed.

Uprooting of vegetation grown from walls, roof chajja gutter cleaning the surface and making good holes with cement mortar (1:3) each hole not exceeding 0.10 Sqm

M&L rendering 5 mm thick in cm 1:3 over/soffit of chajja finished surface even and smooth with out using extra cement complete all as specified and directed.

Rewriting or repainting writing letters or figures (Block, Roman, Italic or indian) n.exc. 30 cm height complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 35400.00 (refer Tender Srl Page No 34). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

MUKHERJEE ENTERPRISE

M/S KAR CONSTRUCTION

SHRI S K BHATTACHARJEE

AMULYA KUMAR ROY

Paritosh Saha

UNIVERSAL CONSTRUCTION

MS CHOWDHURY ENTERPRISE