RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Mobile Storage Compactors ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Category Note Compactors i.e. Mobile Movable Storage Systems of configuration as per detailed specifications. One quantity/piece of offered configuration include specified Compactors i.e. Mobile Movable Storage Systems of configuration as per detailed specifications. One quantity/piece of offered configuration include specified 1/12 offered number of Rows of Single Faced Fixed end unit
RequiredSingle Faced Movable end Unit and double sided double faced movable Dual unit covering all bays. Prices quoted are for the entire solution comprising of end units and specified numbers of movable units and the corresponding quantities of Rails
RequiredDrive Mechanisms and all other components necessary to make the Compactor/Mobile Storage System operational. The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). offered number of Rows of Single Faced Fixed end unit
RequiredSingle Faced Movable end Unit and double sided double faced movable Dual unit covering all bays. Prices quoted are for the entire solution comprising of end units and specified numbers of movable units and the corresponding quantities of Rails
RequiredDrive Mechanisms and all other components necessary to make the Compactor/Mobile Storage System operational. The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). Number of Bays (One bay represents one storage almirah body in one row - Please see representative layout diagram for understanding) (=A) 3-Bay 1-Bay
Required2-Bay
Required3-Bay
Required4-Bay
Required5-Bay
Required6 – Bay
Required7 Bay Type of Drive Sprocket Chain Drive Mechanism Push Pull Type
RequiredMechanized Drive Type
RequiredSprocket Chain Drive Mechanism Number of Single Faced Fixed/Static Rows (=B) (Units Cabinets open at one side (with or without doors) and closed on other side - covering all bays) - (Please see representative layout diagram for understanding) 1 0
Required1 Number of Single 1 0
Required1
Required2
Required3
Required4
Required5
Required6
Required7 2/12 Faced Movable Rows (=C) (Units/Cabinet open at one side (with or without doors) and closed on other side covering all bays) (Please see representative layout diagram for understanding) Number of Double Faced/Dual/Twin Movable Rows (= D) (open on both sides (with or without doors) covering all bays) (Total number of available Bodies Almirahs = A x (B + C + 2D) 5 0
Required1
Required2
Required3
Required4
Required5
Required6
Required7
Required8
Required9 Number of Shelves in Each Almirah Body of the single faced fixed/static bodies 4 Shelves/5 Compartments 2 Shelves/3 Compartments
Required3 Shelves/4 Compartments
Required4 Shelves/5 Compartments
Required5 Shelves/6 Compartments
Required6 Shelves/7 Compartments
Required7 Shelves/8 Compartments
Required8 Shelves/9 Compartments
Required9 Shelves/10 Compartments
RequiredNA Number of Shelves in Each Almirah Body of the double faced movable bodies 4 Shelves/5 Compartments 2 Shelves/3 Compartments
Required3 Shelves/4 Compartments
Required4 Shelves/5 Compartments
Required5 Shelves/6 Compartments
Required6 Shelves/7 Compartments
Required7 Shelves/8 Compartments
Required8 Shelves/9 Compartments
Required9 Shelves/10 Compartments
RequiredNA Number of Shelves in Each Almirah Body of the single 4 Shelves/5 Compartments 2 Shelves/3 Compartments
Required3 Shelves/4 3/12 faced movable bodies Compartments
Required4 Shelves/5 Compartments
Required5 Shelves/6 Compartments
Required6 Shelves/7 Compartments
Required7 Shelves/8 Compartments
Required8 Shelves/9 Compartments
Required9 Shelves/10 Compartments
RequiredNA Load Carrying Capacity of Each Shelf of the single faced fixed/static bodies in Kg 80 kg 60 kg
Required70 kg
Required80 kg
Required90 kg
Required100 kg
RequiredNA Load Carrying Capacity of Each Shelf of the Movable bodies in Kg 80 kg 60 kg
Required70 kg
Required80 kg
Required90 kg
Required100 kg
RequiredNA Load bearing capacity of under structure and base frame 1200 Kg 600 Kg
Required1200 Kg
Required1600 Kg
Required2000 Kg
Required5000 Kg
Required3000 Kg
Required4000 Kg Delivery Condition of Movable Storage System File Knock down * Free Assembly and Installation Commissioning of knocked down supply Yes * Shelves in the cabinets Adjustable * Wheels/Bearings - Every Base frame fitted with (The bearing used should be heavy duty - self aligning Anti frictional ball bearing MS wheels
RequiredAnti frictional ball bearing
RequiredCast Iron Wheels
RequiredMS wheels and Anti Friction Ball
RequiredCast Iron wheels and Anti Friction Ball bearings Number of pairs of Wheels in Every Base frame 2 1
Required2
Required3
Required4
Required5
Required6
Required7
Required8
RequiredN.A Minimum number of pairs of Bearings in Every Base frame 5 1
Required2
Required3
Required4
Required5
Required6
Required7
Required8
RequiredN.A Drive cover included on Body YES YES
RequiredNO Indexing arrangement 2 MM thick clear transparent acrylic sheet and having other * 4/12 dimension of 155MM/106MM Anti rust treatment YES * Stud N.A Main only
RequiredMain and add on construction
RequiredN.A GUIDE RAIL Number of guide rail rows 6 2
Required3
Required4
Required5
Required6
Required7
Required8 Number of 915 mm Rail Pieces per Rail Row 1 * Number of 1830 mm Rails Pieces per Rail Row 4 * Number of 2745 mm Rails Pieces per Rail Row 1 * Guide rail provided with Square bar Stopper (to stop derailment of unit * DOORS and LOCKING Separate Door Provided with each Cabinet Body/Almirah NO * Total Number of Almirahs/Bodies 36 1 - 100 Total Number of Almirahs/Bodies with Door 7 1 - 100 Central Locking System for locking entire compactor unit YES * Safety Lock for each Movable Body NO * Separate door lock for each section NO YES
RequiredNO Fitting of stopper No Stopper * Handle Steel star Wheel type * MATERIAL M S Sheet Thickness of the Cabinet Body (mm) 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest
Required1.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest
Required0.8 mm Continuously pre- painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required1.0 mm Continuously 5/12 pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required2.0 mm Continuously pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required2.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest M S Sheet Thickness of the Shelf Panels (mm) 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest 1.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest
Required0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest
Required0.8 mm Continuously pre- painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required1.0 mm Continuously pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required1.25 mm Continuously pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required1.25 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest M S Sheet Thickness of the Door Panels (mm) 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest 0.8 mm Continuously pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required1.0 mm Continuously pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
Required0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest
Required1.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest
Required2.0 6/12 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest
Required2.0 mm Continuously pre-painted galvanised steel sheets with protective film 40-45 Micron as per IS 14146
RequiredN.A. Height of base frame ±2(mm) 100 mm 65 mm
Required75 mm
Required90 mm
Required100 mm
Required120 mm Height of track and moving clearance ±2(mm) 55 mm 35 mm
Required45 mm
Required55 mm
Required65 mm
Required80 mm Material of Stud NA Rubber stud between bodies
RequiredPVC stud between bodies
RequiredNA Material of base frame – should be one piece welded frame (proper antirust surface treatment ) Hot Rolled Sheet 3.15MM thick Confmg. to IS:10748/Latest * Material of guide rail Consists of J-Section 2MM thick H R Sheet and 25MM thick square bright bar both connected by screws * Material of 'C' Channel H R Sheet 3.15MM thick confmg. to IS:1079/Latest H R Sheet 2MM thick confmg. to IS:1079/Latest
RequiredH R Sheet 3.15MM thick confmg. to IS:1079/Latest
RequiredH R Sheet 2MM thick confmg. to IS:2062/Latest
RequiredH R Sheet 3.15MM thick confmg. to IS:2062/Latest Drive cover material 0. 8 mm thick CRC sheet conforming to grade D of IS 513/2008 latest and box type construction 1MM thick CRCA confmg. to IS:513/Latest and box type construction
Required0. 8 mm thick CRC sheet conforming to grade D of IS 513/2008 latest and box type construction
RequiredNo Cover Number of Folds in Shelf Panels 10 Nos. 8 Nos.
Required10 Nos.
Required12 Nos. DIMENSION Overall Height of the Cabinet from the ground in mm ±20 2350 mm * 7/12 (mm) Depth of the single faced fixed/static bodies Cabinet ±10(mm) 450 mm 315 mm
Required375 mm
Required450 mm
Required560 mm
Required610 mm
Required915 mm Depth of the single faced movable bodies Cabinet ±10(mm) 450 mm 315 mm
Required375 mm
Required450 mm
Required560 mm
Required610 mm
Required915 mm Depth of the movable bodies Cabinet ±10(mm) 915 mm 315 mm
Required375 mm
Required450 mm
Required560 mm
Required610 mm
Required915 mm Width of the single faced fixed/static bodies Cabinet in mm (± 5 mm) - THIS IS WIDTH OF EACH SECTION OR EACH BAY) Overall width of entire compactor will be this width multiplied by number of bays 915 mm 905 mm
Required915 mm
Required1050 mm
Required1180 mm
Required1300 mm
Required1500 mm Width of the movable bodies Cabinet in mm (± 5 mm) - THIS IS WIDTH OF EACH SECTION OR EACH BAY) Overall width of entire compactor will be this width multiplied by number of bays 915 mm 905 mm
Required915 mm
Required1050 mm
Required1180 mm
Required1300 mm
Required1500 mm Minimum Excess Rail Length in addition to Filing Cabinet Covering ( For Aisle working) (mm) 915 mm * Pitch of all the shelves (+/- 2 MM) 25.4 mm * Aisle space inside of units 915 mm * Height of Drive cover unit ± 10 mm - * Depth of Drive cover unit ± 10 mm - * Width of Drive cover unit of single faced fixed/movable ± 10 mm - * 8/12 Width of Drive cover unit of Double faced movable ± 10 mm - * PAINT Paint Pre Coated Powder Coating
RequiredEnamel Paint
RequiredPre Coated
RequiredPowder Coated with fire retardant epoxy polyester powder Colour of Paint AS PER BUYER CHOICE * WARRANTY Warranty Period IN NUMBER OF YEARS 5 – Years 1 – Year
Required2 – Years
Required3 – Years
Required4 – Years
Required5 – Years CERTIFICATION Test reports to be furnished to buyer on demand NO * OEM of offered product having BIFMA membership NO * OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * OEM of offered product is ISO 18001:2007 certified NO * Green guard certification NO * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
