Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.1 LAccepted-AOC PLOT NO 8 5179 SAILASHREE VIHAR CHANDRASEKHARPUR BHUBANESWAR DIST KHURDA ODISHA 751 021 | KHORDHA | ODISHA | 751021 | L1 | Accepted-AOC L1 Bidder Bid is accepted. | |
| 2 | L2₹31.6 L+₹1.1 L (3.73%)Rejected-Finance AT PO DUMURIPUT DIST KORAPUT | DUMURIPUT | KORAPUT | ODISHA | L2 | Rejected-Finance RATES QUOTED ARE HIGHER THAN L1 | |
| 3 | L3₹32.2 L+₹1.7 L (5.56%)Rejected-Finance | L3 | Rejected-Finance RATES QUOTED ARE HIGHER THAN L1 |
| Sl No | Description | Qty | Unit | M/s Jai Sree Hari L3 | M/S SANTOSH SATAPATHY L2 | SMART ENERGY SOLUTIONS L1 |
|---|---|---|---|---|---|---|
| 1.00 | SCHEDULE PART I (B/R ITEMS)
M&L for preparation of old decorated surdface of wall by washing rubbing down of old surface and applying one coat of oil bound distemper all as specified and directed. | 1,000 | SQM | 70 ₹70,000 | 78 ₹78,000 | 68 ₹68,000 Lowest |
| 2.00 | M&L for preparation of old decorated surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. | 2,000 | SQM | 210 ₹4,20,000 | 200 ₹4,00,000 | 185 ₹3,70,000 Lowest |
| 3.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed. | 425 | SQM | 70 ₹29,750 | 45 ₹19,125 Lowest | 55 ₹23,375 |
| 4.00 | S&F Non-skid Ceramic tiles, joint free, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:6 all as directed. | 250 | SQM | 1,280 ₹3,20,000 | 1,250 ₹3,12,500 Lowest | 1,310 ₹3,27,500 |
| 5.00 | M&L non skid ceramic 7 to 8 mm thick coloured tiles (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment as in floor including laying of 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. | 45 | SQM | 1,290 ₹58,050 Lowest | 1,310 ₹58,950 | 1,350 ₹60,750 |
| 6.00 | S&F glazed white ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm or 350 X 250 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick bedding in cement mortar 1:4 complete all as specified and directed. | 120 | SQM | 1,375 ₹1,65,000 | 1,390 ₹1,66,800 | 1,300 ₹1,56,000 Lowest |
| 7.00 | M&L granite (of any type) work, 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. | 5.5 | SQM | 6,500 ₹35,750 | 6,100 ₹33,550 | 5,600 ₹30,800 Lowest |
| 8.00 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. | 8 | RM | 70 ₹560 | 50 ₹400 Lowest | 80 ₹640 |
| 9.00 | S&F in repair 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed. | 200 | EACH | 950 ₹1,90,000 | 900 ₹1,80,000 | 880 ₹1,76,000 Lowest |
| 10.00 | S&F in repair 15 mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed. | 19 | EACH | 950 ₹18,050 | 900 ₹17,100 | 880 ₹16,720 Lowest |
Tender Value
₹31.5 L
EMD Value
₹63,000
Closing Date
21 May 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (P) (NAVY) VIZAG
Garrison Engineer Project Navy Vizag, HQ CE Navy Complex, Station Road, Visakhapatnam AP-530004
REPAIR AND MAINTANANCE OF CERTAIN B/R AND E/M ITEMS AT NAD SUNABEDA, ODISHA UNDER GE (P) NAVY VISAKHAPATNAM
2025_MES_704176_2
8928/E8
Open Tender
Civil Works
Item Rate
270 days
SUNABEDA
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (P) (NAVY) VISAKHAPATNAM
₹63,000
Yes
2 Sept 2025
1 May 2025
23 May 2025
1 May 2025
21 May 2025
8 May 2025
1 May 2025 - 8 May 2025
Amount
SCHEDULE PART I (B/R ITEMS) M&L for preparation of old decorated surdface of wall by washing rubbing down of old surface and applying one coat of oil bound distemper all as specified and directed.
M&L for preparation of old decorated surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.
S&F Non-skid Ceramic tiles, joint free, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:6 all as directed.
M&L non skid ceramic 7 to 8 mm thick coloured tiles (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment as in floor including laying of 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
S&F glazed white ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm or 350 X 250 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick bedding in cement mortar 1:4 complete all as specified and directed.
M&L granite (of any type) work, 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
S&F in repair 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) complete all as specified and directed.
S&F in repair 15 mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.
S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding including brackets, cutting for and pinning in ends of brackets or erecting stand including waste pipe of 32mm bore complete as all specified and directed
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.0 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.
S&F in repair Vitreous china premium/ 1st qualitywash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified.
S&F in repair vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S&F in repair white PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and directed.
Supply, hoisting and fixing in proper position ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), of capacity 500 litres and providing necessary connections including dismantling old tanks complete all as specified and as directed.
S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overal length of cover plate 150 mm complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. MAKE : PRAYAG, Cat No. PSS-5-D or equivalent model in CERA/ PARRYWARE / DIAMOND / ANJALI / BLUE STAR)
S&F in repair mild steel ordinary rat tail rod pattern springs including roller and roller plate, 300 mm complete all as specified and directed.
Dismantling of Asbestos cement (corrugated/ semicorrugated) sheets including ridge as in roof covering and removing off the site complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
SCHEDULE PART I (E/M ITEMS) S&F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F in repair 9 Watt LED lamp, 220-240 Volt, AC 50 HZ, energy saving type complete all as specified and directed.
S&F in repair switch socket combination 2 pin & 3 pin 5 Amp with box, 240 volt, white, multipurpose, complete all as specified.
S&F in repair switch socket combination 2in 1 type, 5 pin 5 / 15 Amp with box, 240 Volt, white, multipurpose, complete all as specified and directed.
S&F in repair bell electric, ding dong type, AC 230 Volt, complete all as specified.
S&F in repair switch socket combination 2 pin & 3 pin 5Amp, 240 volt, white, multipurpose, complete all as specified.
S&F in repair switch socket combination 2in 1 type, 3 pin 5 / 15Amp, 240 Volt, white, multipurpose, complete all as specified.
S&F in repair Fan regulator, electronic step type for ceiling fan of any sweep, complete all as specified.
S&F in repair LED light fitting 18 watts with and including LED tube rod 4 feet long suitable for single phase 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. (MAKE : BAJAJ, Cat No. BCLSB 18 WH or equivalent as mention in PS Make of list)
S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (MAKE : Havells Cat No. LHEXACP7IN1W010 or equivalent as mention in PS Make of list)
S&F in repair Modular Switch 1 way 6 A, 1 module complete all as specified and directed.
S&F in repair Modular Switch 1 way 16 A, 1 module complete all as specified and directed.
S&F in repair Modular Socket 6 A, 5 pin combined 2 module complete all as specified and directed.
S&F in repair Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.
S&F in repair Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.
S&F in repair 25 watt LED security light made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optics with IP66 protection with all fittings and LED bulb including taking down old fitting complete all as specified and directed. ( MAKE : Bajaj Cat No. NEXO 30L WH PO PC SD or equivalent as mention in PS clause Make of list)
M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x60 cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge not less than 1.5 m below ground level,connected to galvanised Iron wire 4 mm dia by means of bolts, nuts, check nuts, washers of galvanised iron or steel all as shown in electrical plate No 5 of SSR part I, connected to earth test point all as specified or indicated complete with Excavation, earth work, PCC 1:3:6 pit with RCC 1:2:4 cover 54cm x 54cm x 50 mm thick reinforced with hard drawn steel wire fabric weighing exceeding 4 Kg/Sqm with suitable handle made of 10mm dia MS bar, 20 mm bore GI tubing medium grade for watering pipe, 15 mm bore upto 7.5 mtrs medium grade GI pipe for protection of earth lead, test point, GI funnel with 4 mm wire mesh all as directed and specified and testing on completion.
S&F in repair switch paino, flush type, single pole, one way, 5/6 Amp, white, complete all as specified.
S&F in repair bell push, 5Amp, 230Volt, white, complete all as specified.
Supply & lay / passing through pipes in repair cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volts Conforming to IS: 694 1.5 Sq mm complete all as specified and directed.
Supply & lay / passing through pipes in repair cable Heat Resistant Flame Retardant HRFR PVC Insulated Industrial Cables Single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volts Conforming to IS: 694 2.5 Sq mm complete all as specified and directed.
S&F in repair MCB TPN DB, IP 43 protection, double door (premium quality), 415 volts, 4 way with 200 Amps copper bus bar for each phase complete all as specified and directed. (MAKE : L&T, Cat No. DBTPN004DD / LEGRAND, Cat No: 507670 / SCHNEIDER, Cat No. A9HTND04 / ABB, Cat No: E-SHDB M4 / PANASONIC, Cat No: BQS 304H / HAGER, Cat No: VYT04DH)
S&F in repair Double Door, Sheet Metal Enclosure for DBs (Premium Quality), for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN008DD / LEGRAND, Cat No: 507611 /ABB, Cat No. E-SHC M 8 / SCHNEIDER, Cat No. A9HSND08 / HAGER, Cat No: VYS08D or equivalent as mention in PS Make of list)
S&F in repair Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 12 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : LEGRAND, Cat No. 507612/ L&T, Cat No. DBSPN012DD / ABB, Cat No. NSYN8690SPN0M12 or equivalent as mention in PS Make of list)
S&F in repair Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 200 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T, Cat No. DBSPN004DD / LEGRAND, Cat No: 5076 10 / ABB, Cat No. E-SHC M4 / SCHNEIDER, Cat No. NBKRENSNDD04 / HAGER, Cat No: VYS04D or equivalent as mention in PS Make of list)
S&F in repair MCB SPN 32 Amps, 10 KA rating, 'C' curve complete all as specified and directed
S&F in repair MCB TPN 63 Amps, 10 KA rating, ' C' curve complete all as specified and directed
S&F in repair MCB SP 6 to 32 Amps, 10 KA rating, ' C' curve all as specified and directed
S&F in repair 70 watt LED street light made up of pressure dia cast housing with pinnacle plus LED street light made up of pressure dia cast aluminium housing with integrated poly carbonate lense, high power ceramic LEDs with IP66 protection with all fittings and LED bulb including taking down old fitting complete all as specified and directed. (MAKE : Bajaj Cat No. ENXT P 84L WH PO PC SD or equivalent as mention in PS clause Make of list)
M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, complete all as specified and directed. (NOTE : Three runs of single core 4.0 sqmm cable & one run of PVC conduit shall be measured as one unit)
M&L for sub main wiring with 2 run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through and including PVC conduit (medium grade) of suitable size, surface type complete all as specified and directed. (NOTE : Three runs of single core 6.0 sqmm cable & one run of PVC conduit shall be measured as one unit)
S&F in repair DOL motor starter of building fire booster pump in sheet enclosure type suitable for 10 HP electric motor 3 Phase, 440 volts and 50 HZ complete all as specified and directed. (Make : BCH/ HAVELLS/ L&T/ SIEMENS/ CG)
Taking down the defective motor of pump set of capacity 7.5 HP, by disconnecting connections, removing the motor from bed, transporting to workshop, dismantling the burnt out winding from rotor/ stator and rewinding the rotor or srator with same type super enameled copper wire of same gauge and with necessary insulating material, varnishing, backing, re-assembling the motor completely transporting back to site and alignment with the same with connection including testing and commissioning complete all as specified and directed.
S&F in repair ball bearing suitable for 7.5 HP induction motor, 3 phase, complete all as specified and directed. (Make : ZKL/ NBC/ SKF)
M&L in repair for replacement of battery 12V, 17 AH as per existing pattern of 10 KVA UPS system complete all as specified and directed.
M/S SANTOSH SATAPATHY (BID ID -3301897)
M/s Jai Sree Hari (BID ID -3301577)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .