Providing Functional Household Tap Connections and Erection of Twin Shallow Borewell for Nainikattalai OHT including new pipeline and allied works under Jal Jeevan Mission 2020-21 at Nainikattalai Village in T.R.Pattinam Commune Panchayat (2nd Call)

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , not exceeding 80mm dia

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , exceeding 80mm dia but not exceeding 300 mm dia

Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 90mm dia.

Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

Providing and fixing in position UPVC moulded equal Tee (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 90mm dia

Providing and fixing in position UPVC moulded unequal Tee (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for ointing, jointing materials etc,complete - 90 x 75mm dia

Providing and fixing in position UPVC moulded plain coupler (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for ointing, jointing materials etc,complete - 90mm dia

Providing and fixing in position UPVC moulded elbow (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete -90mm dia

Providing and fixing in position UPVC moulded endcap (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 90mm dia

Providing and fixing in position UPVC moulded saddle set (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 90 x 20mm dia

Providing and fixing in position UPVC moulded saddle set (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 75 x 20mm dia

Providing and fixing in position UPVC moulded tail piece without flange (Finolex /jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 90mm dia

Providing and fixing in position G.I. reducer elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete - 100 x 80 mm dia.

Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc,complete-80mm dia

Providing, laying and jointing UPVC pipes (Finolex /Jain / Supreme / Truebore /Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc. ,complete all as per IS and CPWD specification. - 20mm dia.

Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately - by manual means - bituminous courses

Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 metres, stacking serviceable and unserviceable materials separately - by manual means - Granular courses

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site , laying in uniform layer by manual means in sub-base / base course on well prepared surface and compacting with smooth 3 wheeled steel roller to achieve the desired density.

Providing two legged scaffolding using 15 cm diameter blue - gum posts or casurina posts or best quality bamboo - posts of 4m over all length (3.0m height + 0.5 m projection + 0.5 into the ground) the distance between the two rows being 1.25 m and the spacing of posts with 0.5 m overlap on either side and braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc in a complete form using coir and nails 1 m run (Rate of scaffolding for a height of 3 m and length of 1 m)

Exta for Providing two legged scaffolding for every additional height of 2.5 m (Rate for scaffolding for a height of 3 m and length of 1m)

Finishing walls with textured exterior paint of required shade - New work (Two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm

Distempeing with oil bound washable distemper of approved brand and manufacture to give an even shade - New work (two or more coats ) over and including priming coat with water thinnable cement primer

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead - with cement mortar 1:4 (1cement : 4fine sand)

White washing with lime to give an even shade - Old work (one or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work

Boring with 100 mm diameter casing pipe for hand pump/tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested - upto 6 metre depth.

Boring with 100 mm diameter casing pipe for hand pump/tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested - beyond 6 m and upto 12 m depth.

Boring with 100 mm diameter casing pipe for hand pump/tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested - beyond 12 m and upto 18 m depth

Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore /Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 40mm dia.

Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore /Nandi) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 110mm dia.

Providing, laying and jointing G.I pipes of medium class (blue) (TATA,TNT, Nezone, Apollo,Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including GI specials such as bends, tees, elbow, coupling, reducer etc., complete all as per IS and CPWD specification. -40mm dia

Providing and fixing gun metal non -return valve of approved quality (screwed end) - 40 mm nominal bore - Vertical

Supplying and packing of 8mm size down gauge graded pebble including filling the annual space gradually complete. The pebbles should be of free from disintegrated pieces.(It will measure in stack for the purpose of payment)

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing /casing pipe,removable as pre requirement , all complete for borewell of - 100 mm dia

Providing and fixing M.S.clamp of required dia to the top of casing / housing pipe of tubewell as per IS:2800 (part I) ,including necessary bolts & nuts of required size complete - 100 mm clamp

Extra for providing 3 mm slots in 40mm dia.UPVC casing pipes

Providing and fixing netlon mesh

Supplying fixing and commisioning of Suguna / Texmo / Sharp 2 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete

Providing and fixing of 65mm Godrej Navatal lock of 6 levers etc complete

Supplying and fixing of 1x40w box type single tube light fittings with copper choke and starter without tube Make- Philips/Bajaj. And fixing 40w tube light Make-Philips