Construction of security room, wash room wood storage room, waiting room and borewell for Gopalpur Creamatorium in ward no-57.

Earthwork in all kinds of soil in excavation of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stoney earth and earth mixed with boulders except sheet rocks and boulders requiring blasting with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge.

Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost,conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per the direction of the Engineer-in-charge.

Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge.

Supplying all labour,materials & T&P for Brick masonary with Fly Ash bricks in Foundation & Plinth having C.S not less than 35 kg/Cm2 in Cement Mortar (1:4) including watering and curing etc complete as per direction of Engineer-in-charge.

Supplying all labour, materials, T&P for Reinforcement Cement Concrete M-20 for reinforced cement concrete works in using 12mm to 20 mm size hard granite Crusher Broken chips including cost of materials,royalty & conveyance charges with watering,curing all complete as per direction of Engineer-in-charge.

Plinth Band

Column & Wall Beam

Lintel

Chajja

Roof Slab

Straightening, cutting, bending and binding, welding and jointing (if necessary ) coiled/ bent up MS Rods /Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 gauge binding wire required for R.C.C work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wire will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S rods or Tor steel linear measurements of rod for finished item of works. 5% wastage and lap length are included in the finished rate).

First class Fly Ash brick work in cement mortar (1:6) in Super Structure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge.

2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips including cost of all labour, materials with all taxes, lead, T&P etc all complete.

Supplying fitting and fixing M,S. Grill as per specification etc.

Supplying all materials,labour and T&P for fitting & fixing of PVC door Shutter with Frame (PVC Choukhatha)of best quality havinging laminated finish will all fixtures including cost of materal,fixtures, carrige,labour,T&P etc all complete as per specification.

Suppllying all materials, labour, fitting and fixing of 50mm thick precast RCC Jalli on ventilator etc complate as per specification.

Supplying all materials, labour, T&P for laying P.C.C(1:2:4) using 12mm size c.b.h.g chips including well curing cost of conveyance & royality taxes etc all complete as per specification and direction of the Engineer-In-Charge

6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment including watering curring etc.

12mm. thick cement plaster (1:6) on brick work including watering curring etc.

16mm. thick cement plaster (1:6) on brick work including watering curring etc.

2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12 mm size crusher broken granites chips including all cost of cost,Conveyance,royality, watering curring etc. Complete.

Supplying all labour,materials for Fixing Anti skid tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete of item of work as per the direction of Engineer-in-charge.

Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete of item of work as per the direction of Engineer-in-charge.

Cement washing two coats Ground Floor

Priming one coat with any approved primer including cost of all labour, materials T & P with taxes, transportation etc all complete.

Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade in Ground Floor.(Out side)

Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in Ground Floor.

Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification(22724)

Flat back stall type magnum Urinal

Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.

Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings

Supplying all materials,labour, T&P for fitting & fixing U PVC S.W.R pipes(4kg/cm2) and fittings of the following outside diameter including jointing with approved solvent cement by non-heat application method testing as per specification with lead of all materials to site.(i)110mm dia SWR Pipe 110 mm OD P.V.C. SWR D/S Pipe (ISI type-B)

110mm dia P.V.C. SWR P Trap

110mm dia U. P.V.C door Tee

110mm diaP.V.C. SWR door bend 87.5'

110 mm dia P.V.C. SWR plain bend 87.5'

110mm dia P.V.C. SWR D/J with door

110mm dia P.V.C clamp

110mm dia P.V.C cowl

110mm dia P.V.C Coupler

i)75 mm OD P.V.C. SWR D/S Pipe (ISI type-B)

75mm dia U. P.V.C door Tee

75mm dia P.V.C. SWR D/J with door

75mm dia U. P.V.C door bend

75mm dia P.V.C Coupler

75 mm diaP.V.C. SWR.pipe clip

Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. [ excluding earth work ]

Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing.

K.B. brick khoa 4cm. Size. for soak-Pit

Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to IS.4985 of Sch-80 the following nominal diameter with fittings and clamps including testing as per specification all complete.

20mm dia PVC Pipe

15mm dia PVC Pipe

15mm dia G.I. Pipe

Supplying all materials, labour and T&P for fitting fixing of following types of P.H. Fittings etc. all complete. i. 15mm dia Long Body CP Bib cock

25mm brass/G.M.F.W. Valve (ISI)

25 mm PVC Ball Cock with Rod & Ball

15mm CP 2 in 1 Bib Cock.

125mm dia C.P Grattings.

15mm dia CP Conceal stop cock

15mm dia CP Angle Stop-Cock

Basin Bracket in Pair

Urinal Spreader

10 ltr PVC low level cistern with fittings.

32mm PVC Fliush Bend

15mm dia C.P. pillar cock

C.P revolving shower with arm (overhead)

C.P towel rail (600 x 20)mm

C.P towel ring.

C.P soap holder/disc.

C.P flange (Big)

C.P Waste. (32mm-5" long)

C.P. Glass self with glass

CP Telephonic shower with CP/PVC Flexible Tube with Hook

Framed Mirror

32mmx 1150mm long PVC waste Pipe

15mmx60mm PVC connection Pipe.

Supplying all materials labour T&P for Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge

Cutting Hole in 250mm to 375mm thick Brick Wall for taking G.I./PVC Pipe and mendig good to damages after completion of Work etc. Complete.

Cutting Hole in 250mm to 375mm thick wall thick Brick Wall for taking 110mm/160mm dia PVC Pipe and mendig good to damages after completion of Work etc. Complete.

Cutting Groove on Brick Wall for taking Water Supply Pipe line and mendig good to damages after completion of Work etc.

Removal of unused excavated materials away from work site by means of mechanical means including loading of the materials as work site and depositng the same at suitable places within 5 km from work site as per direction of the engineer in charge.

150 MMDIA BORE WELL, Cell-29306,AR(PH). Supplying all materials, labour T&P and setting of boring equipments including Errection of suitable staging for Installation of required size of required T/W, dismentalling and removing the same after completion of the said work including transportaion of the boring equipments cleaning and levelling the site properly as per requirement excavation of the mud pit, channel etc. in all respect as per the direction of the Engineering in-Charge (29308)

Supplying all labour, tools and plants and transporting boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement bentonite and gravels etc to work sites including loading and unloading etc. complete as per the direction of the Engineer-in-charge

Supplying all labour and T&P for Drilling the Pilot bore not less than 102mm dia without casing pipe in all kinds of soil and rocks for the following depth including the supplying of necessary boring pipe and cutting equipments extra sockets ( whenever required ) etc. and withdrwing the boring pipes washing and keeping the the bore clear and logging if required complete in all respect as per direction of the Engineering in-Charge. A. Drilling 100mm di of pilot borc from 0.00mtr to 75.00mtrs.

Supplying all labour and T&P for Lowering the 300mm dia Casing pipe fitting and fixing in possition and removing the same after completion of work etc. Complete in all respect as per direction of the Engineering in-Charge.

Supplying all labour and T&P for reaming the Pilot bore to the following sizes and depths without casing pipes including with drawing the boring pipes , washing the bore by means to pipe cylinder etc. Complete in all respect as per direction of the Engineering in-Charge. A. Reaming 100mm dia to 150mm dia (from 0.00mtr to 75.00 mirs depth)

Reaming 150mm dia to 200mm dia ( from 0.00mtr to 75.00 mtrs depth)

Reaming 200mm dia to 250mm dia ( from 0.00mtr to 75.00 mtrs depth)

Reaming 250mm dia to 300mm dia ( from 0.00mtr to 75.00 mtrs depth)

Supplying all labour , T&P and jointing materials and lowering the PVC Casing Pipe ,well screens, Cutter plug fitted and fixed in proper possition and washing and cleaning the bore as per P.H. specification and direction of Engineer in-Charge. A. Lowering 100mm dia PVC Casing pipe (from Omtr to 36.00 mtrs depth)

Supplying all labour and T&P and materials for Cleaning and Developing the Tube Well with Compressor continously washed till clean and adequate discharged is obtained from the Tunbe well including supply and use of necessary equipments and labour complete in all respect as per the direction of Engineer in-Charge.

Supplying all labour and T&P for packing the bore with Washed Gravel or River singles of required sizes ,around well screen and pipes as per specification and direction of Engineer in-Charge.

Collecting, supplying and stacking good Washed Gravel at work site as per specifcation and direction of Engineer in-Charge including all lead ad royality etc. Complete.

Labour for Supplying, fitting and fixing the following pipe and fittings as per P.H. Specification and directon of Engineer in-Charge. A. 150mm dia PVC Well Screen

100mm dia Cutter Plug

100mmX 300mm dia G.I. Short piece

Cap Plug

150mm dia PVC Pipe

Supplying ,installition and commissioning of 1HP Single phase 230 Volt 5oHz submerssible Pump set ( Max. Head-65mtrs, Min Head-39mtrs) suitable for 40mm dia out let etc. complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge.

Supplying and laying of 1.5Sqmm PVC insulated PVC Sheathed twin core Multistrand water proofr Copper Flat Cable (Black) etc.complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge.

Supplying and fixing of 40mm S.D. PVC Pipe etc.complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge.

Supplying, Transporting ,Fitting & Fixing the following accessories as pe specification and direction of Engineer in-Charge.Water Proof Tochen Rope

Tochen Clip

Steel Nipple

Steel Nut & Bolt

1¼'' M.S. Clamp

Black Tap

M. Seal

1¼'' dia G.I. Elbow

1¼'' X 6'' Short Piece

200mm dia Bore cover