Provision of Hardstanding near bldg No P-150 and Provision of Dry Ration Store for Sailor s Mess at INS Gomantak under GE Gomantak Vasco

Amount

M&L for Surface dressing n exc15 cm deep in hard/dense soil

M&L for Excavating in trenches, n exc1.5 m wide and n exc 1.5 m indepth; for foundation, etc. orfor shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth and getting out in soft disintegrated rocks or hard/ dense soil.

M&L for Cement concrete (1:4:8) type D2 as in foundations, filling and mass concrete all as specified and as directed.

M&L for RCC M25 design mix(using 20mm graded aggregate) for Foundations, including rafts, footings, foundationbeams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for RCC M25 (using 20mm graded aggregate) for Columns, pillars, piers, posts and struts

M&L for RCC M 25 (design mix)using 20 mm graded aggregate in beams, cantilevers lintels etc

M&L for RCC M 25 (design mix)using 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, etc

M&L for RCC M 25 (design mix)using 20 mm graded aggregate in chejjas/sunshade etc all as directed by EIC

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat concrete surface

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, over hangs,etc. also splays between floors and beams, etc.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping)

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges

M&L for providing TMT bars 10 mm dia and over, cut to length, bent to shape required incl cranking, bending, sprilly for hooping for columns hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specfied

M&L for providing TMT bars 6mm to 8mm dia cut to length, bent to shape required incl cranking, bending, sprilly for hooping for columns hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specfied

Providing TMT bars 5 mm dia and over up to and including 10mm in stirrups, spacers & binders, cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns etchooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specfied

M&L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres ofemulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for Treating the soil along with externalperimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M&L for Pre-cast cement concrete type C1 (1:3;6) block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:4) complete all as specified and as directed.

Material & Labour for rendering in CM 1 : 4 (10+5)=15mm thickness on brick/cement/stone surfaces and finishes the surface even and smooth with out using extra cement including mixing with liquid WPC on top 5mm thick only Note :- Water proofing compound will be paid separately all as specified and directed.

Suppy only liquid water proofing (Compound) (Make:Dr fixit / Sika / Fosroc)

Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:6 finished even and fair with out using extra cement.

M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying two coat of acrylic emulsion exterior paint (anti fungal paint) on new plastered surfaces walls ceiling and corniers incl preparation of surfaces by brooming down or steel wire brushing scrappingdown with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory putty wherever required complete all as manufacturers instructions.

M&L for preparation of new surfaces of wall and applying two coat of oil bond distember including preparation of new surfaces and chalk whitening complete all as specified and directed

M & L for applying three coats of white wash including preparation of newly plastered surfaces on walls

M & L for applying three coats of white wash including preparation of newly plastered surfaces of ceiling

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for Plain Cement concrete type C- 2,1:3:6 (40mm graded aggregate)

M&L joint free Non Skid ceramic plain coloured tiles (also in patches ) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).

M&L glazed ceramic coloured tiles 350x250x 6 to7 mm thick/ 450x350x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

S & F Powder Coating aluminium frame and shutter for doors, windows, ventilators,partitions,cupboard frames& shutters with one or more rebates including joining cleat for fixing,necessary locking arrangements etc complete all as specified and directed .

S&F for 5.5mm thick sheet glass ordinary type incl rubber beadings/gaskets around glass panes complete all as specified and directed .

S&F aluminium wire mesh of size 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with alumium wire staples complete all as specified and directed by Engineer-in-Charge

S&F aluminium powder coated grill of make DG 104(10mm thick) incl 'F'/'L' /C channel alround grill complete all as specified and directed .

S & F 35mm thick 2nd class HW Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed .

S & F 2nd class hard wood plain solid strasight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed .

S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed .

S & F aluminium anodised barrel tower bolts 200 mm long complete all as specified and directed .

S & F Extruded aluminum anodised alloy handle 150 mm fabricated type complete all as specified and directed .

M&L for 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed

M&L preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over coat of pink primer

Supplying and laying of 20 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11with all fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25 mm dia. CPVC pipes SDR 11 & Plain CPVC SDR 11with all fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair Ball brass valves 25mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule

S&F in repair Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe

S & F 2000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991and removing from site complete.

M&L Hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface

M&L 75 mm thick PCC type C-1 (1:3:6) (using 20 mm graded crushed stone aggregate as in plinth protection laid in panels, finished even and smooth without using extra cement.

M&L for plain Cement concrete type B- 2,1:2:4 (40mm graded aggregate) in flooring 100mm thick.

Returning, filling in, including spreading, levelling, watering and well ramming rock/ soil in layers not exc 25 cm

Removing excavated materials (soft dis integrated rock or soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

M&L for water proofing treatment using 4mm thick APP modified membrane consisting five layer membrane with features as specified, weighing not less than 4.5 kg per Sqnm laid over a coat of cold applied bituminous primer @ 0.20 Kg per sqm by torching the membrane including sealing the over lap while torching with 100mm on length side and 100mm wide side as per manufactorer instuctions including joints and changes in direction the curved with cement mortar 1:3 mixed with SBR Latex @ 200 Ml/bag of cment cured well before laying of membrance all as per manufacturer instructions and to the satisfaction of Engineer -in-charge including two coats of bituminous aluminium paint. Note (i) irrespective of lap the net covered area will only be measured for payment (ii) The quoted rate is deemed to beinclusive of primer APP membrane & SBR Latex all as specified and directed.

M & L 10 mm thick rendering on fair faces of concrete in CM 1:3 finish the surface even & smooth without using extra cement complete all as specified and directed

M&L for Earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base all as specified and directed by Engr in charge.

M&L 80mm thick Machine pressed pre-cast concrete interlocking paverblock any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and as directed. Note : Sand cushioning shall be measured separately.

M&L for sand cushioning under floors in foundation including watering and consolidation all as specified.

Material and labour for pre-cast cement concrete slab for manhole covers slab 1:2:4 type B1 using 20 mm graded crushed stone aggregate set in CM 1:4

Material and labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping including necessary form work.

M & L 15 mm thick rendering on fair faces of concrete in CM 1:4 finish the surface even & smooth without using extra cement complete all as specified and directed

M&L applying two coats of synthetic enamel paint on newly plastered surfaces of of wall including preparation of new surface

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, lfixed in walls as spout pipes

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed in wall/ceiling and modular metal flush box, modular white cover plate with frame, blanking plate & other accessories as required incl suitable number of modular metal box complete all as specified and directed for one light /fan/ext fan point controlled by one, one way switch 06 Amps. Note: Rate quoted is deemed to be inclusive of three runs(phase,neutral,earth) of 1.5 sqmm PVC insulated FRLS wire ,one run of conduit and suitable no of Modular Meatl boxex and cover plate with frame and blanking plate where reqd.

All as per item No 67 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on same board.

All as per item No 67 but 2/3 pin socket out let 5 Amps with 1.5 Sqmm on independent board.

All as per item No 67 here-in-before but for 2 in 1 three pin socket outlet 15/25 Amps on independent board with 4 Sqmm cable FRLS copper conductor multistranded including 4 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire all as specified and directed by Engr-in-Charge.

Supply & Fixing modular switch 1 way 6A, 1 module, 230 volts.

Supply & Fixing modular switch one way 16 Amps, 1 module, 230 volts.

Supply & Fixing modular socket 6 Amps-2/3 pin combined, 2 module.

Supply & Fixing modular socket 6A/16A-2/3 pin combined, 2 module.

Supply and fix ceiling rose surfaces bakelite 65 x 50 mm three terminals including supply and fix PVC plate or square blocks.

Supply & fixing MCB, 0.5 to 5 Amps, single pole, C Series, 10 KA, 240 volts.

Supply & fixing MCB, 6 to 32 Amps, single pole, C Series, 10 KA, 240 volts.

Supply and fixing MCB 40 Amps TPN, C Series, 10 KA, 415 volts.

Supply and fixing MCB 63 Amps TPN, C Series, 10 KA, 415 volts.

Supply & Fixing MCB protected socket of 20 Amps with sheet metal enclosure including plug top 20 Amps complete with one single pole 240V with 20 Amps MCB "C" curve including disconnecting and removal of old one any type. Make : Havells Cat Part No. DHDMCSN0251020 or equivalent in Legrand/C&S/Anchor

Supply & Fixing submain wiring with 3 Runs (Phase, Neutral and Earth) of 4 Sqmm, PVC insulated, unsheathed, single core, multistranded, 1100 volts, FRLS copper conductor cable drawn in and including 25/32mm wide PVC conduit concealed with all accessories as required and connecting to main switch board/Distribution Board and testing on completion all as directed by Engineer-in-Charge.

Material and Labour for sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables four runs of 6 Sq mm multi stranded copper conductor drawn in and including suitable size of non metallic PVC conduit incl all accessories concealed in walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor connecting to main switch board \ Distribution Board and testing on completion etc all as specified and directed. Note : five runs of 6 sqmm cable and one run of PVC non metallic rigid conduit of suitable size shall be measured as one run.

Supply & Fixing sheet metal enclosure DB, 4 way, TPN, double door factory made powder coated including neutral and earth link connector flush concealed in wall complete all as directed.

Supply & fixing exhaust fan (Metal body) 300mm sweep, heavy duty, 230 volts ,1400 RPM including louvers of suitable size and making hole size as per requirement all as specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj

S & F LED Bldg Security Street light 30W ,IP 65 with suitable surge protection device including suitable size of GI pipe of suitable length bent to required shape,clamps,nut ,bolts and making electrical connection to the fitting with Suitable size of three core copper wire.

M/S. M M S ENTERPRISES

M/S jvsr constructions

M/s VEEJEE ENTERPRISES

M/S Kartik Enterprises

M/S P S BABU

Tara Construction

M/s Gayatri Contruction Co.