Improvement to Badabandha MIP at Nuagam in Aska Block under DPIW scheme for the year 2025-26

Clearing shrub jungles and uprooting stumps and small bushes and trees of below 1 meter girth on pre-measurement including removal of debris and depositing the same clear of work site with all leads, lifts and de-lifts etc., with supply of all labour and T&P required for the work etc., complete in all respect as directed by the Engineer-in-charge.

Dismantling brick or stone masonary in lime of cement mortar under 3.00 M height including stacking the useful materisls for reuse and removing the debries clear of work site with all leads, lifts, and delifts with supply of all labour and T & P required for the items etc . complete in all respect as directed by the Engineer-in-charge.

Dismantling and removing lime concrete or cement concrete flooring 7.5Cm to 10 Cm thick including stacking the useful materials for reuse and removing the debris clear of work site with all leads and lifts as directed by the Engineer in-charge.

Excavation , loading, unloading and carriage by mechanical means wihtin 1 KM lead in all kinds of soil including stoney earth, gravel and moorum etc. interspread with boulders up to 1/2 cum size with all lifts and delifts including trimming of slopes and bed to design section and depositing the excavated material away from work site with all leads, lifts and delifts including dewatering , dressing of earth, spreading , levelling in the disposal location or locations as per requirement , all labour charges, T & P , hire and running charges of all machineries B & O.C. worker's welfare cess etc.complete as per specification and as directed by the Engineer-in-charge. ( Measurement is to be taken on finished approved level section . )

Excavation of any approved type of soils in approved borrow area by mechanical means loading into and transportations by mechanical means and unloading the soil within initial lead of 1 Km on properly prepared and scientifically approved surface, including spreading and leveling the earth in 22.5cm (9") layers to make ready for watering and compaction with sheep foot roller and dozers but excluding watering and compaction in dams and dykes for all heights including construction, maintenance, watering and lighting of haul road adn borrow area etc,complete as per the direction of Engineer-in-charge. ( Measurement of the fill to be taken on the finished compacted section under O.M.C. Condition)

Ramming rolling the earth work by light H.R.R. or by hand rammed to proper section and profile with watering to all heights including cost, conveyance and hire charges of H.R.R. with all labour & T & P et.complete as directed by the Egineer-in-charge.

Collecting, Conveying stacks & spreading Moorum on road surface to proper camber and thickness including watering and making arrangement for carriage of water, rolling with H.R.R. turf edging with hire and running charges of H.R.R. etc. complete in all respect as directed by the Engineer in-charge.

Fine dressing the slope of the embankment and turfing with best compact dub grass, sods with all leads, lifts and delifts inclduing periodical watering till survival of turf with supply of all laboru and T & P required for the work etc.complete in all respect as directed by the Engineer-in-charge . (Measurement is to be taken after survival of sods )

Excavation of foundation to proper profile in all kinds soil with all leads and lifts including dressing and leveling the bed to proper slope and level and making it fit for laying concrete including depositing the excavated materials clear of work site within all leads and lifts etc. including dewatering from foundation if required etc. with supply of all labour and T&P. required for the work etc. complete in all respect as directed by the Engineer in charge.

Cement concrete M-15 grade 20mm down graded crusher broken hard granite aggregate of approved quality from approved quarry free from weathered skin quarry rubbish and foreign materials mixing by concrete mixer including ;lifting the materials hoisting, lowering and laying the concrete to required level with all leads and lifts compacting in layers of 0.15M thick with vibrators ramming finishing to proper slope and level, finishing the exposed surface smooth including watering curing for required period etc.including cost, conveyance ;royalty and other taxes of all materials labour T&P materials required for this item including hire running charges of the machineries .complete as directed by the Engineer-in-charge

Providing Cement Concrete M.20 grade for RCC works on approved surface, shape and size using 20mm and downgraded crusher broken hard granite chips aggregates of approved quality quarried, free from weathered skin surface and any other deleterious material, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including hire charges of concrete mixer and vibrator with cost, conveyance, royalty and other taxes of all materials, ( excluding cost, carriage of M.S. rod and labour for cutting, bending, binding and fixing of M.S. rod) with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision charges including mobilisation & demobilisation of machineries, with all incidental charges required for the work complete in all respect as directed by the Engineer-in-charge.

Providing rigid smooth centering and shuttering for R.C.C. work to all heights including false work and dismantling then after casting and curing for required time including depositing the debrices clear of work site with all leads and lifts etc.complete with all cost, conveyance, royalty and other taxes of all materials as directed by the Engineer-in-charge. (For Foundation & Plinth)

Providing rigid smooth centering and shuttering for R.C.C. work to all heights including false work and dismantling then after casting and curing for required time including depositing the debrices clear of work site with all leads and lifts etc.complete with all cost, conveyance, royalty and other taxes of all materials as directed by the Engineer-in-charge. (For Wall & Fins)

Supplying fitting and placing uncoated HYSD rod for concrete works and tying the grills and placing in position for fabrication and fixing of reinforcement & lapping where necessary & all labour and T&P required for the work including supply of binding wire with all leads, lifts from bending yard to placement spot including cost of steel bars of any reinforcement as directed by the Engineer-in-charge.

Rough stone dry packing in aprons & revetments to all heights & thickness using hard granite broken stones of 30cm& above size of approved quality free from weathered skin including filling the interstices with small stones by wedging & hammering to proper slope and level with cost conveyance, royalty & other taxes of all materials including labour cess , all labour , T & P materials required for this items etc. complete in all respect as directed by the Engineer-in-charge.

Rough stone dry packing in aprons and revetments to all heights with departmental stone including filling the interstices with small stones and finishing to proper slope and level with cost, conveyance, royalty andother taxes of all materials require for the work etc. complete in all respect as directed by the Engineer in-charge.

Filling the foundation and plinth with Excavated Earth with watering and ramming to the required condition including all cost, conveyance, royality and other taxes of all materials and including supplying of all labour and T&P required for the item etc. complete in all respect as directed by the Engineer-in-charge.

Labour for laying and fixing reinforced cement concrete hume pipes with collars jointed with cement mortar (1:3) complete including cost, conveyance royalty and other taxes of all materials required for the work with supply of all labour and T& P required for the item etc. complete in all respects as directed by the Engineer-in-charge. (300 mm dia NP3, HP)