PROVISION OF VIEW CUTTER FROM VIJAY CHOWK TO STN CANTEEN JUNCTION, PROVISION OF ALUMINIUM WINDOWS BY REPLACING WOODEN WINDOWS IN BLDG NO MARSHAL-5, ADDITION AND ALTERATION TO BLDG NO P-19 AND CERTAIN MINOR WORKS UNDER GE (WEST) COLABA, MUMBAI

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for cesspits, manholes etc. and getting out in soft / loose soil complete all as specified and directed.

Material and labour for plain cement concrete in foundation (1:4:8) Type D2 using 40mm graded stone aggregate as in foundation and mass filling complete all as specifed and directed.

Material and labour for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Material and labour for treating the blackfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of a vertical surface (Area of the substructure in contact with blackfill to be measured) area complete all as specified and directed.

Material and labour for treating the top surface of filled earth at the rate of 5 litres of emulsion per square meter of surface area complete all as specified and directed.

Material and labour for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Material and labour for RCC M-30 Design Mix (using 20mm graded stone aggregate) as in footings complete all as specified and directed.

Material and labour for RCC M-30 Design Mix (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves complete all as specified and directed.

Material and labour for RCC M-30 Design Mix (using 20mm graded stone aggregate) as in beam and lintels/Chajjas complete all as specified and directed.

Material and labour for RCC M-30 Design Mix (using 20mm graded stone aggregate) as in columns complete all as specified and directed.

Material and labour for MS TMT bars 10mm dia and over out to length, bent to shape required, including cranking, bending including necessary welding as required and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and directed.

Material and labour for MS TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders/tempreture bar etc including other works, bent to shape required, including cranking, bending including necessary welding as required and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and directed.

Material and labour for MS TMT bars 8mm dia and over out to length, bent to shape required, including cranking, bending including necessary welding as required and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and directed.

Material and labour for Formwork to sides of concrete foundation footing bases of columns, rafters etc rough finish surface of concrete flat edges of footings complete all as specified and directed.

Material and labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) flat rough finished surfaces of concrete surfaces complete all as specified and directed.

All as per item No 15 above, but to sides and soffits of floor and roof beams and lintels complete all as specified and directed.

Material and labour for Formwork to sides of columns square triangular, or rectangular in section rough finish surface of concrete flat complete all as specified and directed.

Material and labour for brick work built in CM (1:6) with sub class 'B' bricks, straight or curved on plan, exceeding 6m mean radius complete and all as specified and directed.

Material and labour rendering 15 mm thick external plaster in CM (1:4) on other than fair faces of brick/concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions complete all specified and directed . Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instructions.

Material and labour for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of water based cement primer including use of scaffoldings complete all as specified and directed. Make: Asian Paints - Apex Ultima or Ultima Protek or Ultima Protek Duralife / Berger Paints - Weather coat long life / Nerolac - Excel rain guard / Shalimar paints, as approved by GE.

Material and labour for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Material and labour for preparing of newly plastered surfaces of walls/ceilings and applying two coats of distemper oil emulsion over a coat of alkali-resistant primer complete all as specified and directed. Make : Asian paint (Royale Luxury Emulsion Brand) / or equivalent in Berger paint / Nerolac / Shalimar, as approved by GE.

Material and labour rendering 10 mm thick cement plaster in CM (1:3) on other than fair faces of brick/concrete work surfaces mixed with integral water proofing compound as per manufacturer's instructions complete all as specified and directed. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instructions.

Material and labour for plain cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate), 75mm thick in sub base complete all as specified and directed.

Material and labour for plain cement concrete, type C-2, 1:3:6 (using 40mm graded stone aggregate), 75mm thick as in plinth protection, finished even and smooth without using extra cement including provision of expansion joints, complete all as specified and directed.

Material and labour for hard core of gauge not exceeding 63mm using broken stones, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to true surface complete all as specified and directed.

Filling under floors by earth obtained from excavation including spreading, levelling, watering and well ramming excavated earth in layers not exceeding 25 cm thick complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm with soil into excavated trenches complete all as specified and directed.

Material and labour for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders) such as skirting and dados set and jointed in neat cement slurry, pointed in coloured cement to match, over and including rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. Make :- Kajaria / Euro Tiles / Johnson & Johnson, sample as approved by GE. Note:- Rate of Designer border Tiles in vertical surface is deemed to be included in quoted rate.

Material and labour for GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

Material and labour for 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids, complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

Material and labour for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate), average thickness of 40mm thick as in roof padding for sloping of roof complete all as specified and directed.

Material and labour for Double charged polished vitrified coloured Ceramic tiles, 10 mm thick (Square / rectangular) polished area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. Make :- Kajaria / Euro Tiles / Johnson & Johnson, sample as approved by GE.

Material and labour for coloured double charged vitrified Ceramic tiles, 10 mm thick (square / rectangular) polished area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. Make:-Kajaria / Euro Tiles / Johnson & Johnson, sample as approved by GE.

Material and labour for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

Material and labour for rendering 10 mm thick in CM (1:4) on fair faces of brick work complete all as specified and directed.

Material and labour for Stainless Steel tubing (Square/Round/Rectangular) of suitable gauge (SS 316 Grade) as in SS guard bars, railings, SS frame works (sample as approved by GE) including all fixing arrangments to the finished staircase steps including taking down of old SS guard railing complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting angle or other section and making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type as required (depth exceeding one brick but not exceeding two bricks) complete all as specified and directed.

Supply and fixing Mild steel Framed work as in view cutter or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-290 (Gde E-165) complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of alkyd anti corrosive primer complete all as specified and directed. Make : Asian paint (Royale Luxury Enamel Brand) / or equivalent in Berger paint / Nerolac / Shalimar as approved by GE.

Supply and fixing 3 mm thick fibre glass reinforced polycarbonate translucent plain sheeting fixed with coach screws and washer in mild steel frame as view cutter of walls complete all as specified and directed.

Taking down Chowkhats with shutters (without taking down of shutter from frame) of X-frame, wire mesh area not exc 1.5 Sqm including all fittings and fixtures complete all as specified and directed.

Supply and fixing powder coated any approved colour (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows and ventilators with one or more rebates, fixed / sliding type, including joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed.

Material and labour for 5.5 mm thick sheet glass, ordinary quality in square exceeding 0.5 sqm in each pane frosted on one side complete all as specified and directed.

Material and labour for Granite stone (of any colour sample as approved by GE) 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid in kitchen platform, floors/Jambs/WHB counters and all other similar works in approved design over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Supply and fixing aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Material and labour for framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) exceeding 1.50 not exceeding 4.00 Sqm each complete all as specified and directed.

Supply and fixing mild steel flat iron as in hold fast clamps articles conforming to FE 410 -O or FE 310-O complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1(20 mm graded aggregate) as in bed blocks for hold fast and all other similar works including necesssary formwork complete all as specified and directed.

Supply and fixing for 2nd class hard wood plain, solid, straight chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats etc. area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts, end of posts, backs of chowkhats, etc area not exceeding 0.1 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

Supply and fixing 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides, both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Supply and fixing in repairs aluminium (extruded section) body door closer, hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

Supply and fixing Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.

Supply and fixing for 150mm long extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed.

Supply and fixing Butt hinges 100mm in size, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

Supply and fixing in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Material and labour for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed.

Supply and fix 5.50 mm thick frosted glass, not exceeding 0.5 sqm in each pane, fixed to aluminium frames complete all as specified and directed.

Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe (excluding flushing cistern) including seat cover for pedstal pan complete all as specified and directed.. Make : Cat Part No S1050102 of Cera or Equivalent in Hindware / Prayag, sample as approved by GE.

Supply and fixing in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets, complete all as specified and. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Prayag, sample as approved by GE.

Supply and fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of suitable size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Prayag, sample as approved by GE.

Supply and fixing in repair 15 mm bore fancy type angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of Jaquar/ Prayag/Cera, sample as approved by GE.

Supply and fixing PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixing in repair 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent of Jaquar/ Prayag/Cera, sample as approved by GE.

Supply and fixing in repair 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified & directed. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of Jaquar /Prayag/Cera, sample as approved by GE.

Supply and fixing in repair fancy type CP Towel Rail 61 cm long complete all as specified and directed. Make : ESS ESS CROMA Cat Part No C 412 or equivalent of Jaquar / Prayag/Cera, sample as approved by GE.

Supply and fixing CP Towel Ring complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 502 or Equivalent in Jaquar / Prayag / Cera, sample as approved by GE.

Supply and fixing CP soap dish complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent in Jaquar / Prayag / Cera, sample as approved by GE.

Supply and fixing CP toilet paper holder complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent in Jaquar / Prayag / Cera, sample as approved by GE.

Supply and fixing aluminium deco grill Cat No-104, 6mm thick, cut to required size and shape and fixed in position with aluminium bedding complete all as specified and directed.

Removing excavated material Soils exceeding 250 m but not exceeding 500 m and depositing where directed complete all as specified and directed.

Rounding to edges of stone / granite slabs one edge, such as in steps, around lift wall and other similar situation complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

Supply & fixing Pre-painted galvalume aluminium zinc coating GI based Corrugated/ Profile/ Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof coverings/ claddings to wall, fixed with self-tapping screws complete all as specified and directed

E/M Portion Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, and making good to the disturbed surfaces of walls, floors etc, complete all as specified and directed.

Taking down carefully copper/aluminium submain wiring complete including fixture such as Plug socket box etc, and making good to the disturbed surfaces of walls, floors etc, complete all as specified and directed.

Material and Labour for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fixed concealed 1.2 mm thick pressed steel sunken box and with including moduler cover plate and frame, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putty and apply two coats of paint, match with existing colour in disturbed surface area, as per existing specification and as specified in SSR Part-I complete for one light point / bell/ Exhaust Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module. Make of Cable : Anchor / Havells / Finolex, sample as approved by GE.

All as per serial No.86 here-in-before, but for One 3 pin socket point 5 Amps on independent board.

All as per serial No.86 here-in-before, but for One 3 pin socket point 5 Amps on same board.

All as per srl item No 86 here-in-before, but for one socket point 15 Amp with 4 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified and directed.

Supply and fixing Modular switch 1 way 6A, 1 module complete all as specified and directed. Make : Anchor (Roma)/ Fine / SSK, sample as approved by GE.

Supply and fixing Modular switch 1 way 16A, 1 module complete all as specified and directed. Make : Anchor (Roma)/ Fine / SSK, sample as approved by GE.

Supply and fixing Modular socket 2/3 pin 10 Amp complete all as specified and directed. Make : Make : Anchor (Roma)/ Fine / SSK, sample as approved by GE.

Supply and fixing Modular socket 20 A 2/3 pin complete all as specified and directed. Make : Anchor (Roma)/ Fine / SSK, sample as approved by GE.

Supply and fixing Modular stepped type electronic fan regulator 450 watt, flush type, two module complete all as specified and directed. Make : Anchor (Roma)/ Fine / SSK, sample as approved by GE.

Supply and fixing ceiling rose, surface bakelite 65 x 50 mm, two to three terminals complete all as specified and as directed. Make : Anchor (Roma)/ Fine / SSK, sample as approved by GE.

Supply and fixing LED 15 Watt recessed mounted circular downlighter fitting in repair, 110 Lumin per Watt, decorative type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/ 20mm and necessary fixing arrangement complete all as specified and directed. Make : Havells, Cat Part No : EDGEPRORDDLR15WLED840S or equivalent model of Philips / Wipro, sample as approved by GE.

Supply and fixing star rating ceiling fan 1400 mm sweep, 240 Volts, 50Hz AC supply complete white colour with 3 blades and all required accessories for fixing / hanging complete all as specified and directed. Make : Havells Cat Pt No Velocity ES-50 ISI Mark or in equivalent model in Luminous / Khaitan, sample as approved by GE.

Supply and fixing in repair LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minium 100 luman per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia, light grade, 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers etc duly painted with epoxy anti-rust paint complete all as specified and directed. Make Philips : cat pat No BRP409 LED060HENRPC S1PSU GR or equivalent in Wipro cat part No LR02-501-XXX-57-XX / Havells cat part No ENDURACITYLINERNEXGENSL 45WLED757 SASYBOPC, sample as approved by GE.

Supply and fixing Sub main wiring with two run of 10 sqmm stranded copper conductor FRLSH wire with one run of 10 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC conduit of suitable size with fully concealed in wall / roof / floor of adequate size for housing the wires for submain complete all as specified and directed. Make of Cable : Anchor / Havells / Finolex, sample as approved by GE. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length.

Supply and fixing MCB SP, in repair, 240 volt, 6 to 32 Amps complete all as specified and directed. Make: Havells / Indokopp / Indo Asian / Hager, sample as approved by GE.

Supply and fixing MCB SPN, in repair, 240 volt, 40 Amps complete all as specified and directed. Make: Havells / Indokopp / Indo Asian / Hager, sample as approved by GE.

Supply and fixing sheet metal enclosures for DB, double door, when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make: Havells / Indokopp / Indo Asian / Hager, sample as approved by GE.

Material and labour for earthing complete with galvanized steel plate electrode 600x600x6mm thick, buried directly in ground, earth pit not less than 2.25 deep below ground level with top edge of the plate not less than 1.50 m below ground level connected to GI wire of size 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified including excavation and earth work and disposal of surplus soil including 40 mm GI tubing, medium grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt, PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) earth pit with 40x40x6mm MS angle iron frame, RCC cover, 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate, reinforced with 8 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm bore, GI pipe, medium grade for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part -1 (2009) and connected to earth test incl testing complete all as specified and directed. Note :- GI watering pipe of 20 mm bore (medium grade) and earth lead protection pipe upto 7.5m , 40 mm bore pipe (medium grade) shall be deemed to be included in unit rate quoted.

Bright Construction Co

Vandan Enterprises

Bidder Name

Vandan Enterprises

Bright Construction Co

GANGAJAL