PROVISION OF CERTAIN BR WORKS AT BUILDING NO 284 AAT AND AT ARMOURY, PROVN OF CHAIN LINK FENCING AT TELENKHEDI PUMP HOUSE AND PROVN OF 02- NOS OF AIR CONDITIONER AT COMMUNITY HALL AT VAYUSENA NAGAR NAGPUR

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

Material and labour for Cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. (1+0+3+0)

Material and labour for brick work with fly ash brick straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and as directed

Material and labour for rendering 15mm thick on other than fair finish of bricks/ concrete/ stone surface of wall in CM (1:4) mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and s directed.

Material and labour for rendering 10mm thick in CM 1:6 in brick surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distempr over a coat of primer complete all as specified and s directed.

Material and labour for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and s directed.

Material and labour for providing 75mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as plinth protection/ path finished the surface even & smooth with out using extra cement complete all as specified.

Material and labour for non-skid coloured ceremic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in CM1:6 in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and directed complete all as specified and directed. (5+5+0+0)

Material and labour for glazed ceramic colour tiles in vertical surface of size 450X 300X 7 mm thick over and including rendering 10 mm thick set in CM 1:3 and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour complete as specified and directed (15+20+0+0)

Supply and fixing vitreous china wash down water closet pan (Pedestal pattern), white, including fixing of flush pipe, nut bolts, brackets etc complete all as specified and as directed.

Supply and fixing plastic water closet seat cover, black/ white, closed pattern with flat bottom, and cover and mild steel chromoium plated or aluminised hinging devices complete all as specified and as directed.

Supply and fixing vitreous China wash basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling ,brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, pvc supply pipe 15mm from stop valve 450 mm etc complete all as specified & as directed (1+1+0+0)

Supply and fixing waste pipe of 32 mm dia low density polythelens (LDPE) pipes of pressure rating 6 Kgf/Sq cm complete all as specified & as directed (5+10+0+0)

Supply and fixing repair hand shower (health faucet) (ABS Body) with 8mm Dia, 1.5 Meter Long Spirochrome flex tube & Wall Hook complete all as specified & as directed Make : Jaguar model CODE-ALD 587 or equivalent in Hindware/ Parryware

Supply and fixing pillar cock 15mm bore dia, swan neck tap with left hand operating knob with 45 0mm long braided hose complete all as specified & as directed Make : Jaquar Code CON-123BKN or equivalent in Cera/ Kohler/ Johnson

Supply and fixing 2-way bib cock with wall flange, chromium plated, 15mm bore dia complete all as specified & as directed Make : Jaguar CODE-FUS-29041 or equivalent in Cera/ Kohler/ Johnson

Supply and fixing angle cock, chromium plated, 15mm complete all as specified & as directed

Supply and fixing stop cock, chromium plated, 15mm bore dia complete all as specified & as directed.

Supply and fixing soap dish holder (CP Brass) complete all as specified & as directed . Make : Jaguar, code-AKP-35731P or equivalent in Hindware/ Parryware

Supplyand fixing towel rail complete all as specified & as directed . Make -Jaguar, Code-AQN-7711 or equivalent in Prayag/ M/s Swastik

Supply and fixing toilet paper holder with flap complete all as specified & as directed . Make: Jaguar, Code-AKP-35753PS or equivalent in Prayag/ Cera

Supply and fixing stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed

Supply and fixing PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. (10+5+0+0)

Supply and fixing PVC(SWR) Bend 110mm bore complete all as specified and as directed. (1+2+0+0)

Supply and fixing PVC(SWR) Tee 110mm bore complete all as specified and as directed. (1+2+0+0)

Supply and fixing grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. (1+1+0+0)

Supply and fixing high density polyethylene pipes (HDPE) 15mm dia of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc. complete all as specified and as directed. (10+10+0+0)

All as per item no 29 above but pipes (HDPE) 20 mm dia. (10+5+0+0)

Supply and fixing cast iron nahani trap, with grating 100 mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. (1+1+0+0)

Supply and fixing in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. (2+5+0+0)

Supply and fixing aluminium louvered type ventilator weighing 0.55 kg/mtr with 4 mm thick frosted glass with all fittings closing and opening type using powder coated aluminium sections of approved make confirming to IS complete all as specified and directed. Note: Glazing shall be measured and paid seperately.

Material and labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification omplete all as specified and directed. (5+15+0+0)

Supply and fixing 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as shown on drawing on page 146 of SSR Part-II 2004 including taking down the old PVC door shutters as specified & as directed. (1.5+4.5+0+0)

Material and labour for aluminium alloy, anodised, sliding door bolt (250mm long) with hasp n staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-uminium alloy and fixed complete all as specified and as directed (2+3+0+0)

Supply and fixing floor door stopper 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fixing stainless steel butt hinges medium weight size 100mm long complete all as specified and as directed.

Supply and fixing aluminium handles cast type anodised size 150 mm long. (2+6+0+0)

Supply and fixing aluminium anodiesed barrel tower bolt of extruded section size 200 mm . (2+4+0+0)

Supply and fixing galvanised. 2 strand, steelbarbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed Note: Each line wire to be measured.

Supply and fixing stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed

Supply and fixing pillar taps15mm bore of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and directed

Supply and fixing bib tap 15 mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm?125gms complete all as specified and directed.

Supply and fixing stop valve 15 mm of PTMT any colour high pressure screwed for iron pipe and fixed.(minimum weight 15mm-90gms/ 20mm?92gms) complete all as specified and directed

Supply and fixing soap dish, any type, appx size 160x160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed

Supply and fixing towel rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (minimum weight 190gms) all as specified and directed

Supply and fixing 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

Supply and fixing vitreous chain squatting pan, 'orrissa pattern" size 630x450mm white with integral foot rests, including PVc ' P' or 'S' trap (excluding flushing cistern and flush pipe) complete bedding all as specified and directed.

Supply and fixing vitreous china urinal, half stall type,white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections ofapproved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with equired EPDM rubber/ neoprene gasket Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at op, bottom and sides with required EPDM rubber/ neoprene gasket complete all as specified and directed.

B L A N K

Supply and fixing stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/ steel/ aluminium windows, or stainless steel wire staples complete all as specified and as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and as directed.

Supply and fixing mild steel angles , bars , flats, etc as in supports for stiffening of fencing , wall ties, hold fasts, clamps plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O or Fe 310-O complete all as specified and as directed.

Supply and fixing mild steel screw bolts (machine made) 16 to 20 mm dia of shank with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and as directed.

Supply and fixing mild steel screw bolts (machine made) 16 to 20 mm dia of shank with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and as directed.

Supply only chain link MS galvanized fencing, any size/ type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and as directed.

Material and labour for mild steel round bars 10 mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips in chain link fencing confirming to Fe-410-W(Gde.E-250) quality-A or Fe290 (Gde-E-165) complete all as specified and as directed.

Supply and fixing mild steel work in framed and hung gates, including pintle hinges, stops, hand made sliding bolts etc. and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Material and labour for for point wiring (surface) complete with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 4 Sq mm (nominal area) multi stranded copper conductor cable drawn through PVC casing and caping of suitable size including all accessories, modular PVC box with cover plate and frame of suitable make, fixing in walls/ floors/ ceilings with 4 Sq mm coppr earth continuity wire connected to earth dolly complete for one AC power unit on Independent board complete all as specified and as directed.

Supply and install invertor based split AC of capacity 1.5 TON (Copper coil) electric driven single phase, 230 volts, 5 star rating including all accessories like brackets, stand for outdoor unit, rubber tubing, copper tubing, gas charging, with auto filter clean technilogy etc including testing and commissionin with as per norms of BEE and making good to the disturbed surface to match the existing surface complete all as specified and as directed. Make: Hitachi/ LG/ Blue star/ Vlotas/ Lloyd Note :- All cooing /condensing coil should be of copper material.

Supply and fixig power unit for AC upto 2 ton, 4 module, 240 volts all as specified and directed. Make: Legrand/ Anchor Roma/ Havells

M/s Prakash R. Verma