GE/ALP (8463) KOLKATA OF 2025-26

Amount

Demolition of brick work built in cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for providing cement concrete with type B1 (1:2:4) (using 20mm graded stone aggregate) as in coping and the like including weathering slightly rounded or chamferred angles and throating complete all as specified and directed.

M&L for PCC type B-2 (1:2:4) (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Taking down cement plaster or lime plaster of any description from stone or brick wall/ ceiling etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MoD land including necessary scaffoldings complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on brick walls finishing even and smooth (with out using extra cement) etc complete all as specified and directed.

M&L for Rendering 15mm thick with cement mortars (1:6) on of brick work or concrete surfaces finished even and smooth without using extra cement including necessary scaffoldings complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, brick work, masonary etc including taking out embedded portion and making good of disturbed ground complete all as specfied and directed.

Dismantling fencing wire mesh, any type complete all as specfied and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering & removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and directed.

M&L Cement concrete type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

S&F for joist, channel, angle, or tee section, fixed independantly, without connecting plates, etc. as in fencing post conforming to Fe 410 W (gde E-250 quality B) complete all as specified and directed.

Supply only Chain link MS galvanised Chainlink fencing of approved size or type weight as directed per square metre as approved and complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips quality conforming to round bars complete all as specified and directed.

S&F for flat iron as for securing wire mesh etc. posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat ironfillets ) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square n exc 5 cm long dia of neck 5 to 10 mm complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 15cm thick, above or below ground level complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in Sub Base complete all as specified and as directed.

Dismantling of interlocking tile (60-80) mm thick complete all as specified and directed.

M&L for 25 mm thick sand cushion under paver block or interlocking tiles floor including watering and consolidation complete all as specified and directed.

M&L for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and directed.

All as per item No. 24 here in before but except tiles complete all as specified and directed

Demolition of re-inforced cement concrete (re-inforcement cut as required to facilitate demolition) of any descriptions, in Ground floors not exc 150mm thick, above or below ground level complete all as specified and directed.

M&L for providing RCPC factory made 75mm precast RCC cover slab of 3MT load bearing capacity conforming to IS : 12592 (Grade M-30) 3 for drain cover and manhole cover, Complete all as specified and directed.

M & L PCC type D-2 (1:4:8) (using 40mm graded stone aggregate) as in fundations, filling and mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for pre-polished cement concrete designed coloured chequered tiles glossy finish of area n exc 0.16 sqm as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors, iron gate, ladders; framed balusters, ways : railing : frame work of watertanks and similar work conforming Fe-290, Gde E-165 complete all as specified and directed.

M&L for preparing of new steel surfaces & applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specfied and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws and complete all as specified and directed.

S&F for prepainted galvalume aluminium zinc coating plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof ridges /cladding to wall, fixed with self tapping screws and complete all as specified and directed.

M&L for prepration of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of cement base paint on walls complete all as specified and directed.

M&L for prepration of over new plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coat of cement base paint on walls complete all as specified and directed.

M&L for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm overcomplete all as specified and directed.

M&L for preparation of old painted surfaces of steel & iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 2mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified and directed.

MAZUMDER & CO (BID ID -3314777)

NICE INFOTECH (BID ID -3313972)

P N GUPTA AND SONS (BID ID -3313700)

M. M. C. AND CO (BID ID -3313661)

EASTERN REFRIGERATION AND ELECTRICAL CO (BID ID -3313603)

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION (BID ID -3314700)

GAYATRI ENTERPRISE (BID ID -3310638)

M/S. CHAKRABORTY ENTERPRISE (BID ID -3314650)

Lokenath Engineering Co. (BID ID -3310199)

M/S AVIJEET INTERNATIONAL (BID ID -3313761)