GE/ALP (8617) KOLKATA OF 2025-26

Common items for JOB 'A', 'B' & 'C'

M&L for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar (1:4) complete all as specified and as directed.

M&L for PCC ( 1:4:8 ) Type D -2 using 40 mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs etc. also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and as directed.

M&L for form work to sides of pillar ,post struts pier column stanchions rough finished surface of concrete complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in any type of Soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.

Removing excavated material in exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for formwork to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick rough finished surface of concrete (Horizontal or sloping) complete all as specified and as directed.

M&L for RCC Type B1 (1:2:4) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels etc complete all as specified and directed.

All as per BOQ Serial item No 10 above but in column complete all as specified and as directed.

All as per BOQ Serial item No 10 above but as in slabs supported on walls, beams and columns in floors, roofs, laundry, balconies, canopies, deck slab, shelves, etc complete all as specified and as directed.

M&L for Damp proof coarse to horizontal or vertical surfaces including necessary form work in PCC(1:2:4) type B-0 using 12.5 mm graded stone aggregate, 25mm thick complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipe single socket in any length with rubber ring joints complete all as specified and as directed.

S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

M&L for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for 10mm thick plastering as in ceiling surfaces in CM (1:3) surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick plastering on fair faces of brick wall and concrete surfaces in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.

Preparing surfaces of new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and M&L for applying two coats of acrylic distemper with & including 2mm thick wall care putty complete all as specified and directed.

Preparing New decorated plastered or unplastered surfaces of ceiling, pillasters cornices etc and M&L for applying two coats acrylic distemper emulsion over & including a coat of wall care putty complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for broken stone boulders Hard core, broken to gauge n exc 63 mm,deposited,spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floors finished even and fair surfaces complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregates as in sub base complete all as specified and as directed.

M&L for Providing cement concrete type B-1,1:2:4 using 20 mm graded stone aggregates as in benching concrete, coping , hold fast etc complete all as specified and as directed.

S&F 10mm thick toughened glass for shower Partition openable/ sliding type fixed with stainless steel frame fixing bolts,handle and all necessary fittings complete all as specified and as directed.

Preparation of new steel surfaces of any description over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 using 40mm graded stone aggregates as in plinth protection, sub base, similar works complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Items only for JOB 'A' (B/R Portion)

Dismantiling of Plain or Corrugated, semicorrugated, etc) steel sheeting any gauge, thickness including Nainital or similar pattern in roof coverings and rubbish off the premises (out of MOD land) complete all as specified and as directed.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and as directed.

Preparation of old plastered surface of wall and M&L for applying two coats of oil emulsion distemper over and including a coat of primer and 3mm thick wall care putty on walls complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick mangloor pattern of any colour any shape having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss,purlins, rafter, stanchions etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and as directed.

M&L for heavy duty endura vitrified floor tiles area of each tiles exc 0.36 sqm but n. exceeding 0.72 sqm 10mm thick (square/rectangular) anti skid polished, tiles over & including 15 mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Items only for JOB 'B' (B/R Portion)

M&L for Anti termite treatment for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M&L for Anti termite treatment for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L for Anti termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

S&F Factory made single extruded WPC(Wood polymer composite) solid flush door shutter decorative type of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/Sqm, modules of elasticity 850 N/sqm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood polymer composite) solid door Frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqm and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof & fire retardant & fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and as directed..

&F Factory made single extruded WPC(Wood polymer composite) wire mesh door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), minimum compressive strength of 50 N/Sqm, modules of elasticity 850 N/sqm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over & including 15 mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per BOQ Serial item no 48 above but as in skirting , dado etc over & including 10 mm thick cement plaster in CM (1:4) complete all as per specified and directed

S&F Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F in repairs aluminium anodised Partition wall of frame size (80mm x 38mm x 3.00 mm) with standard beads/glazing clips, locking arrangement incl 5mm thick glass etc with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and as directed.

Items only for JOB 'B' (E/M Portion)

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : (i) Proper colour code of wiring to be maintained. (ii) Rate of cutting chases and making good is deemed to be included in quoted unit rate.

All as per BOQ Serial item No. 52.1 above but for 5 Amps Socket on same board complete all as specified and directed.

All as per BOQ Serial item No. 52.1 above but for 05 A socket on independent board complete all as specified and directed.

All as per BOQ Serial item No. 52.1 above but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

S&F Modular type switch, one way 6 Amps , 1 module complete all as specified and directed..

S&F socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.

S&F Modular type socket 5 pin, 16 Amps 2 module complete all as specified and directed.

S&F Modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

S&F Modular type fan regulator step type(2 module)120 Watt complete all as specified and directed.

S&F Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V complete all as specified and directed.

S&F LED light fitting wit high out put diffuser 4 feet, 20 att 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F SPN, MCB, DB, 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts single door type complete all as specified and directed.

S&F MCB, 06 Amps to 32 Amps, single pole, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and directed.

S&F MCB 06. Amps to 32 Amps, SPN, 240 Volt "B" series, breaking capacity 10 KA complete all as specified and directed.

S&F ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep complete all as specified and directed .

S&F Wall mounted fan of sweep 400 mm elegently desined of round shape with pull cord control for speed and oscillation complete all as specified and directed.

Items only for JOB 'C' (B/R Portion)

Preparation on new plastered surfaces of wall and M& L for applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over & including a coat of primer complete all as specified and directed.

M&L for colour printed glazed ceramic tiles (Premium quality of exterior grade) (600X300mm) X 7mm thick as in walls set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 10 mm thick cement plaster in CM (1:4) (design of sample approved by GE) complete all as specified and as directed.

M&L for colour printed glazed ceramic earthenware tiles 149mmx 149mm (or 152.4mm x 152.4 mm) x 6mm thick, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement tomatch the shade of tiles over and including 10 mm thick cement plaster in CM (1:4) complete all as specified and as directed.

Please Enable Macros to View BoQ information