Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹29.7 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹33.2 L+₹2.2 L (7.17%)Rejected-Finance H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹33.6 L+₹2.6 L (8.48%)Rejected-Finance H NO 01 EXTN 01 SUBASH NAGAR JAMMU J K 180007 | JAMMU | JAMMU | JAMMU AND KASHMIR | 180007 | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹33.9 L+₹3.0 L (9.57%)Rejected-Finance | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹34.9 L+₹3.9 L (12.6%)Rejected-Finance GURHA BRAHMANA TEH AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | L-5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
14 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
REPAIR TO ROOF, SHAFT, GALVALUME SHEET AND CHAJJA ALONG WITH CONNECTED ITEMS IN ZONE A AT DAMANA UNDER GE JAMMU
2022_MES_559736_1
GEJC-49/2022-23
Open Tender
Civil Works
Item Rate
200 days
AoR of GE Jammu
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
GE Jammu
₹80,000
Yes
13 Dec 2022
25 Oct 2022
16 Nov 2022
25 Oct 2022
14 Nov 2022
9 Nov 2022
Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus, moss, dust etc, cleaning the surface of all foreign material by wire brushing and dusting and racking out RCC slab complete all as specified and removing the debris outside defence land all as directed.
Material and labour for rendering 20mm thick in cement mortar (1:4) on concrete surfaces including mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing compound shall be measured and paid for separately.
Supply only liquid water proofing compound complete all as specified and as directed.
Material and labour for cleaning the roof surfaces and applying bitumen primer @ 0.30 Kg / sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.00 Kg / sqm reinforced with non woven polyester mat weighing not less than 160 gm / sqm, having softening point not less than 800 N / sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15 cm end laps, laying by application of torch and applying industrial bitumen 85 / 25 @ 1.20 Kg / Sqm on top surface complete all as specified and as directed.
Dismantling of cast iron 100mm or reinforced concrete drain pipes jointed in cement mortar including taking out of trenches, if required complete all as specified and as directed.
Dismantling of cast iron 75mm or reinforced concrete drain pipes jointed in cement mortar including taking out of trenches, if required complete all as specified and as directed.
Supply and fixing PVC (SWR) pipes 110 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed.
Supply and fixing PVC (SWR) pipes 75 mm bore single socketed in any length with rubber joint fixed to wall or laid in trenches or in floor with steel clamps complete all as specified and as directed.
Supply and fixing PVC (SWR) bends of 110 mm bore complete all as specified and as directed.
Supply and fixing PVC (SWR) bends of 75 mm bore complete all as specified and as directed.
Supply and fixing PVC (SWR) junction double (double T) equal or unequal provided with oval access door of 110 mm dia complete all as specified and as directed.
Supply and fixing PVC (SWR) junction single (single T) equal or unequal provided with oval access door of 75 mm dia complete all as specified and as directed.
Demolition of brick masonry built in cement mortar including all quions, arcesh, pillars etc complete all as specified and as directed.
Material and labour for brick work using old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.
Description all as per Ser Item no 14.00 here-in-before but except bricks complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing unserviceable material outside cantt area complete all as specified and as directed.
Material and labour for 100mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3m in length, finished fair and even complete all as specified and directed.
Demolition of deteriorated reinforced cement concrete of chajjas and similar suspended work by using cutter and flushing the surface complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of concrete / brick surface as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on surfaces other than fair faces of brick surface finished fair and even without using extra cement etc complete all as specified and as directed. (including all necessary scaffolding lifting arrangement for external surfaces upto three storey buildings).
Material and labour for rendering 20mm thick in cement mortar (1:4) on concrete surfaces including two or more dubbing coat including necessary formwork and scaffolding surface finished even and smooth without using extra cement such as chajjas, upward fascias and similar items upto four storey building including two coats of white wash complete all as specified and as directed.
Material and labour for rendering 15mm thick cement plaster (1:3) on surfaces other than fair faces of concrete surfaces as on fascia of roof slab, chajja, shelves etc finished even and smooth without using extra cement complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement for three storey building on external surfaces).
Material and labour for applying two coats of exterior emulsion paint any colour over one coat of primer upto 12 metre height in patches on newly plastered surfaces of fascias, chajjas and roof projection complete all as specified and as directed and colored approved by Engineer-in-Charge.
Material and labour for preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Material and labour for applying two coats of cement based paint including preparation of new plastered surfaces complete all as specified and as directed.
Material and labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and as directed.
Material and labour for complete removal of existing surface and applying two coats of exterior emulsion paint any colour over one coat of primer upto 12 metre height complete all as specified and as directed and colored approved by Engineer-in-Charge.
Material and labour for cutting and derooting of tree, shrubs on wall, ceiling, roof, adjacent to pipes, at corner etc upto three storey and making good with PCC (1:2:4) including finishing the surface to match the existing shade complete all as specified and as directed.
Dismantling asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed.
Material and labour pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Material and labour pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling timber scantling 40 sq cm and over in section framed work of any description complete all as specified and as directed.
Supply and fixing for structural steel works of Fe 410 W (grade 'E' 250) quality 'A', as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate / red oxide primer paint (including preparation of surface) before fabrication complete all as specified and as directed.
Supply and fixing plates (plain or chequered channels, square cut or notched (ordinary and counter sunk)) forming holes, without any attachment complete all as specified and as directed.
Material and labour for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5 cm and not exceeding 30cm long, diameter of neck 16mm to 20mm complete all as specified and as directed. Make: - Confirming to IS.
Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. Note: - Cost of Form work required for these items shall be deemed to be included in the unit rate of this item.
Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.
Supply and fixing for frame work for ceiling with specification as under mentioned: - (i) GI section frame work (powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange 0.33mm thick. Wall angle shall be screwed / fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm centre to centre in both directions and all suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any, complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing for 4mm thick of size 605 X 605mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 fixed / laid / inserted to GI framework at ceiling with screws complete all as specified and as directed.
Material and labour for reinforced cement concrete (nominal mix) (1:2:4) in type B-1 (using 20mm graded crushed stone aggregate) beams, cantilevers, bressummers, lintels over 1.5m span, as in lintel band complete all as specified and as directed.
Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs not exceeding 20cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for steel reinforcement TMT bars 10mm dia and over cut to length, bent to shape and tying with annealed mild steel wire 0.9mm dia complete all as specified and as directed.
Description all as per Ser Item No 43.00 here-in-before but 5mm dia and over upto and including 10mm dia as in binders, stirrups, spacer complete all as specified and as directed.
Material and labour for two coats of oil bound distemper to newly plastered surfaces including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.
Complete removal of existing treatment of old surface of wall (plastered or unplastered) and applying one coat of cement based paint complete all as specified and as directed.
Material and labour for one coat of oil bound distemper of wall to old plastered surfaces including preparation of surfaces complete all as specified and as directed.
Material and labour for one coat of synthetic enamel paint on old steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new surface complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and as directed.
STAR CONSTRUCTIONS
Mehta Enterprises
M/s Koul & Sons
bushan kumar
ASHOK KUMAR PURI
GENESIS INDIA
M/S PARAMJEET SINGH
M/S Shesh Paul Gupta
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .