Construction

Item No.1 : Cleaning grass and removal of rubbish upto a distance of 50 meters outside the periphery of the area as directed.

Item No.2 : Removing dry silt from the canal bed and stacking as directed with 15 mtr. Lead and all lift etc. Complete as directed

Item No-3:- Excavation in all kinds of soil including boulders up to 0.6 m diameter ( 0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. Complete with lead up to 1 km and all lifts as directed.

Item No-5:- Providing & laying chip masonry back filling behind concrete lining in CM 1:8 including striking joints, curing, centering, scaffolding etc. complete but excluding pointing etc. complete as directed (35% mortar) (Cement 1.01 bags/Cum)

Item No 6 A:- Providing and laying in situ M-15 (20 MSA) (28 day scube compressive strength not less than 15 N/sqmm) grade cement concrete with clean, hard, graded aggregates for canal lining for side and bed including cost of all materials,machinery, labour, cleaning with batching plant and transit mixer placing inposition, finishing with all slope of canal including centering, scaffolding, formwork, compaction, curing, by cutting grooves, filling with sealing compound and providing porous plugs preparation of subgrade etc. complete with all lifts etc. complete as directed. a) For Bed Lining (Cement 5.64 bags/Cum) a)Bed Lininng

Item No 6 A:- Providing and laying in situ M-15 (20 MSA) (28 day scube compressive strength not less than 15 N/sqmm) grade cement concrete with clean, hard, graded aggregates for canal lining for side and bed including cost of all materials,machinery, labour, cleaning with batching plant and transit mixer placing inposition, finishing with all slope of canal including centering, scaffolding, formwork, compaction, curing, by cutting grooves, filling with sealing compound and providing porous plugs preparation of subgrade etc. complete with all lifts etc. complete as directed. a) For Bed Lining (Cement 5.64 bags/Cum) b)Side Linning

Item No-7:- Manufacturing and erection ofcanal gate (D.O.) of size 300 mm x 300 mm with frame skin plate,hoiting unit, stem road with material labour charges etc complete job

Item No-8:- Providing R.C.C.pipe of NP2class conforming to IS458 2003 of following diameter including cost of all material and labour required, inspection charges, transportation to stores, transit insurance, loading,unloading and stacking excluding GST levied by GOI and GOM in all respect etc. complete as directed. d) 800mm

Item No-9:- Laying and jointing R.C.C. pipe of NP2 class or IRC standard in C.M. 1:2, proportion by volume including cost of all materials (excluding pipes and collars), labour, aligning pipes, batching and mixing mortar,packing joints with hemp and mortar, finishing,curingetc.complete with all lifts as Directed. d)800 mm

Item No.10: Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curing etc. complete with all lifts as directed. (M-15 20MSA Cement 5.64bags/cum)

Item No.11: Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, compacting, curing etc. complete with all lifts etc. complete as directed. (Specification Section 3.1) (M-20 20MSA Cement 6.60bags/cum)

Item no. 12:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps,footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed.