11/EE(R/L)/2026-27

Supply, installation including cartage of Cast Iron Decorative Poles of 4 m height (nominal) above the existing foundation, fabricated with Cast Iron (FG-20) with or without MS Pipe. The total weight of the pole shall be minimum 100 kg with full-length hot dip galvanized MS Pipe complete from top to bottom inside the cast iron pole. In case the CI pole is without MS Pipe, the total weight of the CI pole shall be minimum 120 kg. The pole shall have an integral inbuilt connection box with cover, duly mounted with one (1) No. 16 Amp SPMCB, one (1) No. 32 Amp, 4-way heavy-duty connector, and earth stud, etc., complete as required. The poles shall also have detachable flag rods made of 50 mm MS Strip and 38 mm (OD) MS Pipe of 250 mm. & top portion 50/60 mm. The pole shall be painted by paint of black polyurethane paint/PU metallic & lacquer coating, as per sample approved by the competent authority.

Making of RCC foundation with 1:1.5:3 (1Cement: 1.5Coarse sand: 3Concrete) of size (500 mm x 500 mm )x 1000 mm deep, 08 Nos. 12 mm dia iron rods of length 1200mm and 06 Nos. rings of 08 mm dia iron rods of 1.8m length for framing iron cage excusively for Pole with 04 Nos. M-22or 24mm din tempered GI J type bolt of 750 mm long & suitable aesthetic good-looking plinth. The level of base plate of Pole must be 150 mm above the curve stone/ central verge/ground level, So that the foundation placed along with bolt does not submerge in the rain water. The plinth must have provision of 2 Nos. DWC pipe of size( 63mm dia x1mtr) for cable entry and exit . DWC pipe atleaset should be 30cm bulging outside the plinth for facilitate to couple the pipe already laid in ground. Excavation of soil meant for pit should not be left open. Site must be cleared in all respect.

Supply of power cable of 1.1 KV grade L.T. XLPE Cable of size 25 sqmm./ 3.5 Core confirming to IS:7098 (Part-I).Type of conductor: Aluminium (Standard and shaped) Make: Polycab/Finolex/ Havells.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METALpipe as required. sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 4.1 Upto 35 sq. mm

Supply of power cable of 1.1 KV grade L.T. XLPE Cable of size 185 sqmm./ 3.5 Core confirming to IS:7098 (Part-I). Type of conductor: Aluminium (Standard and shaped) Make: Polycab/Finolex/ Havells.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METALpipe as required. sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 6.1 Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 7.1 Above 95 sq. mm and upto 185 sq. mm

Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying & laying of 125 mm dia (OD) HDPE pipes ISI Marked PN-4 Class of following sizes by trenchless technology across in various roads service road/main gate in NDMC area.

SITC of 45 Watts LED Post Top Decorative Fittings in 6 leg, 230Volt, 50Hz, IP-65(minimum) CCT - 6000+/500K, Operating Temprature Range -10 deg C to +50 deg C with warranty of 2 years as per site requirement and satisfaction of engineer in charge. Makes: Crompton/Phillips/Jaquar