SPL REPAIR TO BLDG NO T 142 HANGER NO 02, T 151, T 137 AND P 05 OPEN SHED AT 30 R AND O AT PARTAPUR UNDER GE 873 EWS

Amount

Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section as spd and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation board/ slabs/ blanket any thickness including cover filllets, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

Dismantiling Wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F Roof trusses Fe 410W (grade-E-250) quality A (framed) trussed ,purlins crane gantries rails etc(beam tee angle channel or flat sections), complete all as specified and directed.

M&L Mild steel, plain, black sheet 1.25 mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as, complete all as specified and directed.

M&L preparation of new untreated surfaces eaves gutter and pipes any description n exe 60 cm girth including holdbats ,distance pieces ,etc (length measured over bends ,branches etc) one coat of syntetic enamel paint over a coat of priming with red oxied, complete all as specified and directed.

M&L plain fillet second class Hardwood plain filllets, rectangular in section, clean swan, secured with nails exc 13 and n.exc 25 Sqcm, complete all as specified and directed.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling incl taking down & refixing all electric fittings, fixture and wiring, complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling size of grid 605x605 mm and 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws incl taking down & refixing all electric fittings, fixture and wiring, complete all as specified and directed.

M&L 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in wall paneling incl taking down & refixing all electric fittings, fixture and wiring, complete all as specified and directed.

M&L for 18/19mm width teak wood lipping 6 mm thick for Patical board/block board complete fix with nail, complete all as specified and directed.

S&F Plain galvanised mild steel sheeting of 0.63 mm thick in ridges ,hips ,valley gutter drip and straght flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with J hooks two framed work with PVC and steel washers as in roof & wall with grade of zinc coating 275, complete all as specified and directed.

S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L Preparation of new steel surface and and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, complete all as specifeid and directed.

M&L for preperation of existing treatment on steel and iron surface of any descripton and applying one coat of synthetic enamal paint (galvanisation should be removed if required) ,complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc, incl racking out joints, hacking for key, scrubbing down with water etc, complete all as specifeid and directed.

M&L for Rendering 15mm thick on fair faces of stone masonry work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specifeid and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate), complete all as specified and directed.

M&L coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:6 screed bed for laying floor all as specified and directed.

M&L white coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:6 screed bed for laying floor all as specified and directed.

M&L glazed ceramic White tiles 450mm x 300mm x 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3), complete all as specified and directed.

Taking down chowkhat or door frames including shutters exc 1.5 sqm n exc 4 sqm each, complete all as specified and directed.

Taking down chowkhat or not exc 1.5 Sqm frames including shutters each, complete all as specified and directed.

S&F plain, solid, straight chowkats of second class hard wood and frames, wrough, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints, complete all as specified and directed.

S & F 30 mm thick, 1st class plain framed, panelled shutter (any number panels ) with in panels of timber flat on both sides (feather edged ) or of veered particle medium density ,wood particle board with commercial face veneers supplied and fitted to chowkhets, complete all as specified and directed.

Taking down shutter of any description n exe 1 Sq.m each and removing for site all as specified & directed by Engr-In- Charge.

Taking down shutter of any description n exe 1 Sq.m andn.exe 2 sqm each removing for site complete all as specified and directed.

S&F, 25 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators/window, complete all as specified and directed.

M&L preparation of new wooden surfaces, two coats of synthatic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete all as specified and directed.

S&F mild steel, cold rolled, medium weight butt hinges 75mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed.

S&F mild steel, cold rolled, medium weight butt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames, complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F aluminium handles ,cast type anodised 150mm long complete all as specified and directed.

250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 4.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each spane complete all as specified & directed.

S&F aluminium Door closer hydraulically regulated,extruded section body designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in repairs, complete all as specified and directed.

Hacking out out old broken glass (any thickness size quality or description ) from steel or wooden frames or stone concrete or brick surrounding glazing with putty or fixed with beads complete all as specified & directed.

Taking down 15/ 16 mm water supply tubing of any description and connections including cleaning for re-fixing or removal to store etc complete all as specified.

S&F 16mm outer dia 3-layer PP-R poly-propylene random copolymer concealed pipes SDR 7.4 (PN-16) UV stavlized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or floors etc., complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry/ PCC block masonary , built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L Precast cement concrete block masonry with solid blocks exc 10 cm in width and set in cm 1:6, type C1 1:3:6 (20 mm graded aggregate), complete all as specified and directed.

M&L, Rendering 15mm thick on fair faces of brick work finished even and fair in CM 1:4, complete all as specifeid.

M&L, Rendering 10mm thick on fair faces of brick work finished even and smooth without using extra cement in CM 1:6, complete all as specifeid and directed.

M&L, for prepartion of newly plastered wall surfaces of any description applying Two coat of cement base paint /over a wall of primer, complete all as specifeid and directed.

M&L for preparing newly plastered or pointed surface of wall and applying two coats of distemper over a coat of primer complete all as specified.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2(40 mm graded stone agg) in sub base coarse, complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20 cm x 25cm thick , set jointed 20mm screed bed in CM 1:4 and pointed in neat cement slurry in floor with grey pigment cement and pigment, complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (20 mm aggregate ) in rounded or chamferd on edges bed plates kerbs water troughsand the like including slightly rounded or chamfered angles as directed.

M&L for Providing cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate), 75mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays complete all as specified and directed.

M&L for wood finished laminated flooring (AC-4 class) 8.3 mm thick with click/ tongue an groove connecting system and fixed on floor including all necessary adhesive, hard ware etc

Taking down carefully damaged copper/ aluminum point wiring (light/ fan/ socket or power) complete including fixture and fittings such as switches, ceiling roses, cassing & capping, pendants, sockets, light fitting etc and making good disturbed surfaces of wall/ roof complete all as specified and directed.

Taking down of MCB DB/TPN 8 way including mcb sp and spn and making good of wall complete all as specified and directed.

M&L Point wiring with 1.5 Sqmm (nominal area) copper conductor FRLS-H cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through ERW Steel Conduit including steel flexible conduit suitable size (as per conductor run) with all fittings and accessories and including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box with Hylum sheet protection on rear side made out of 2nd class hard wood board covered with 3mm thick plastic laminated Hylum sheet ISI marked of suitably Gang box size and shape and other modular sunken boxes for mounting light points etc for following complete all as specified and directed.

All as per Srl Item No. 58 above but for One light point controlled by one 5 Amps one way switch

All as per Srl Item No. 58 above but for one 3 pin socket outlet 5 Amps on independent board

All as per Srl Item No. 58 above but for one 3 pin socket outlet 5 Amps on same board

M&L Point wiring with 2.5 Sqmm (nominal area) copper conductor FRLS -H cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through ERW Steel Conduit casing and caping of suitable size (as per conductor run) with all fittings and accessories and including ERW Steel Conduit insulated unsheathed electric cable 1100 volts 2.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board covered with 3mm thick plastic laminated Hylum sheet ISI marked of suitably Gang box size and shape and other modular sunken boxes for mounting light points etc for following complete all as specified and directed by Engr-in-Charge.

M&L Point wiring with 4 Sqmm (nominal area) copper conductor FRLS -H cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts drawn through ERW Steel Conduit casing and caping of suitable size (as per conductor run) with all fittings and accessories and including ERW Steel Conduit insulated unsheathed electric cable 1100 volts 4 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including 50mm deep box made out of 2nd class hard wood board covered with 3mm thick plastic laminated Hylum sheet ISI marked of suitably Gang box size and shape and other modular sunken boxes for mounting light points etc for following complete all as specified and directed by Engr-in-Charge.

S&F Switch piano flush button single pole one way 5 Amps, 240 Volts complete all as specfied and directed by Engr-in-Charge.

S&F Socket outlet 2 in 1, 3 pin, 6A (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 3 pin, 5 Amps, 2 in 1 flush type (multipurpose) suitable for 2 pin / 3 pin plug complete all as specified and directed by Engir-in-Chage.

S&F switch socket combination 2 in 1, 3 pin, 5/15 Amps, flush type (multipurpose). Complete all as specified and directed by Engr-in-Charge.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

S&F Rechargeable LED Bulb 9 W ,220 V, white color all as specified and as directed.

S&F surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver tube light fitting 22W, 4 ft long, 220 Volts , and connecting to ceiling rose with three core twisted flexible copper cable of suitable size complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testing complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed.

S&F MCB DB sheet enclosure,Double door type, single pole and neutral 240V with 200 Amp rated bus bar suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way, complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

S&F MCB SPN 240V, 10KA 'C' curve (40-63) Amp current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on, completion all as specified and as directed.

M&L for GI Pipe (light grade,ISI Marked) 32 mm dia, 1.5 mtr long ,bend to shape for street light fitting bracket ,with 2x pairs of MS clamps of suitable length of size 40x5 mm of MS flat iron with nuts bolts and washer and taking out old one including connection with street light, completion all as specified and as directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete making all necessary connection with suitable capacity of 3 core circular cable, complete all as specified and directed.

S&F LED high bay light 90 watt 230 V AC indoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with all hanging arrangement all as specified and directed.

S&F low intensity aviation light 230 V AC outdoor type,red colour with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp with all mounting arrangement all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and directed.

S&F for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, 2 core, cross-sectional area 10 sq. mm, complete all as specified and directed.

S&F for Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed.

S&F for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

S&F for aluminium strip 25 x 3.15mm with saddles and fixingscrews etc. for roof conductor and down conductors above ground complete all as specified and directed.

S&F 5 Star rated Energy Efficient Electric Geyser Vertical Type Copper 25 Litres Storage capacity with Thermostat, Pressure release and all other safety features as per BIS and duly provided with Inlet Outlet chrome plated steel connections, brass stop cocks, grouting with cement on the wall and provided with 2.5 Sq mm copper wiring and 15 Amp Switch Socket incl connection to earth, complete all as specified and directed.

Taking up the existing cables from trenches of any size all as specified and directed.

Supply, laying, fixing, passing through pipe or laid in trenches and testing underground XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross section area 16 sqmm 4core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cable, fixing of stay etc 10 Sqm on plan and n exc 1.5 in depth and getting out in hard/dence soil complete all as specified and directed.

Returing, filling in incl spreading, levelling watering and well ramming in layers n.exc 25cm width, Complete all as specified and directed.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above starting point, completed all as specified and diercted.

S&F for double wall corrugated (DWC) outer pipe 40mm and inner dia 32mm fix complete to wall, poles etc with suitable clamp for protection of cable, completed all as specified and diercted.

Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item

M/S HONY CAPT RIGZIN SAMPHEL (BID ID -3501470)

M/S ASGAR ALI TIMBER SHOP (BID ID -3501508)

M/S MA CONSTRUCTION Co (BID ID -3501760)