HMC/HWW/P-07/2025-26/04

Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (b) Above area 2.5 Sq.m [Ref : P.W.D.(Bldg.). Page- 152, Item-30.b]

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. [Ref : P.W.D.(Bldg.). Page- 11, Item-10]

Labour for Chipping of concrete surface before taking up Plastering work. 0 [Ref : P.W.D.(Bldg.). Page- 192,Item - B.(1)]

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. [P.W.D.(Bldg.). Page- 16, Item-16&3rd Corrigenda]

Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor [Ref: P.W.D (Bldg) 2017, Page - 15, Item.- 7]

Controlled Cement concrete with well graded stone chips (20 mm nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.[using concrete mixture] M 25 Grade (i) Pakur Variety [Ref: P.W.D (Bldg) 2017, Page-26 Item No- 10] Analysis no-15]

Hire and Labour Charges for shuttering with hard wood for precast R.C. Slab curved, or stright and striking out the same including fitting, fixing the precast slab in position with necessary carriage and haulage, hosting etc, complete in all respect. [Ref: P.W.D (Bldg) 2017, Page-43, Item No- 38]

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel II. Other than SAIL/ TATA/RINL [Ref : P.W.D (Bldg) 2017, Page-43, 44 Item No. 40.a.(i).II]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (b) 15 mm thick plaster [Ref : P.W.D.(Bldg) 2017, Page-189 , Item No. 1.ii.(a).(b)]

Neat cement punning about 1.5mm thick in wall, dado, window sill, 0 [Ref : P.W.D.(Bldg) 2017, Page- 192, Item No. 15]

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (a) 1st class Best Indian teak. [Ref : P.W.D.(Bldg.). Page- 114, Item-1]

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. i) 50mm thick shutters with 25mm thick panel of size 30 to 45 cm. (a) 1st class best Indian teak. [Ref: P.W.D.(Bldg.). Page- 117, Item - 1.(i).(a)

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. ii) Grill weighing above 16 Kg./sq.mtr and above [Ref: P.W.D.(Bldg.). Page- 104, Item-13.(a).(i) & 3rd corri.]

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (c) 40mm X 6mm, 125mm Length [Ref: P.W.D.(Bldg.). Page- 140, Item-4.(C)]

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. [Ref: P.W.D.(Bldg.). Page- 143, Item-16.(b)]

Door stopper.(Brass) [Ref: P.W.D.(Bldg.). Page- 143, Item-19.(i)]

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark (vii) 100mm. X 58mm. X 1.90mm. [Ref: P.W.D.(Bldg.). Page- 140, Item-5.(vii)]

i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long. [Ref: P.W.D.(Bldg.). Page- 142, Item-10.i.c.]

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285- 1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3- track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white For 3-Track window : [Ref: P.W.D.(Bldg.). Page- 245, Item-15]

Supplying bubble free float glass of approved make and brand conforming toIS:2835-1987. v) 6mm thick clear glass. 8.000 Each 608.00 M 2 4864.00 [Ref: P.W.D.(Bldg.). Page- 243, Item-9(v)]

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. 14.000 M 2 3402.00 M 2 47628.00 [Ref : P.W.D.(Bldg.), Page-106, Item No.-18]

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification andas per direction of the EIC. (In Ground Floor) i) Water based interior grade Acrylic Primer (b) Two Coats [Ref: P.W.D.(Bldg.). Page- 196, Item-7.(b).(i)]

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. iii) Two coats. 485.000 M 2 70.00 M 2 33950.00 [Ref: P.W.D.(Bldg.). Page- 196, Item-10]

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. [Ref: P.W.D.(Bldg.). Page- 200, Item - 1.(b)]

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. [Ref: P.W.D.(Bldg.). Page- 200, Item - 1.(a)]

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : iv) Two coats (with any shade except white) [Ref: P.W.D.(Bldg.). Page- 201, Item -2.(b).(iv)]

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : iv) Two coats (with any shade except white) [Ref: P.W.D.(Bldg.). Page- 201, Item -2.(b).(iv)]

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge [Ref : P.W.D (Bldg) 2017, Page-12, Item No. 13]

Add 18% GST

Add 1% Cess