Tender ID

Karnataka

Retender

Works

Other Works

Construction of Proposed 12TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) At CMC, Chintamani

Directorate Of Municipal Administration

DMA City Municipal Council Chintamani | Karnataka

Amount: ₹1.0 CrCloses: 25 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published7 Nov 2024
Closed25 Nov 2024
Retendered7 Nov 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 7 Nov 2024

Tender Value

₹1.0 Cr

EMD Value

₹1.7 L

Closing Date

25 Nov 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

Prasad

Mobile Number

Work Description

Construction of Proposed 12TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) At CMC, Chintamani

Tender Information

Tender ID

DMA/2024-25/OW/WORK_INDENT30230

Reference Number

DMA/2024-25/OW/WORK_INDENT30230

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

DMA City Municipal Council Chintamani

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAudited CA Certificate of Annual Turnover

RequiredBank gaurentee certificate

RequiredLine of credit Certificate from nationlised bank

Requiredsimillar type of work done Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

Tenderers are required to read the Bid Documents carefully before submission of their bid

Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund

The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2024-25

Turnover certificate from CA with valid UDIN No. to be furnished along with necessary documents

Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time

Bidder has to quote rates excluding GST, GST shall be paid separately as per applicable

All the Work done certificate uploaded should include E-procurement indent number

Technical Criteria

Past Experience

Satisfactory completed, at least one similar Building/PEB/ Shed work of value not less than Rs. 52.50 Lakhs as prime contractor. for the financial year 2019-20 to 2023-24(KPPP Portal Indent Numbers Should be mentioned in all submitted work done certificates for similar work done and Quantities and issued by the officer not below the rank of Executive Engineer or Equivalent)

Work Done Certificate

Executed in any one year (2019-20to 2023-24) the following minimum quantities of work Sl Item Description Unit Quantity executed (1)Excavation/EmbankmentCum73.00 (2)PCC/RCCCum92.00 (3)Steel reinforcement/Structural steelTonne28.50Masonry(Solid concrete blocks/ SSM/BBM)Cum220.00(5)Alltypesofroofingsqmtr1300.00

Work Done Certificate

Capabilities of Vendor

GST Registration certificate

GST Registration

Financial Status

To qualify for award of this contract, each tenderer in its name should have in the last five years i.e., 2019-20 to 2023-24 Achieved in at least two financial years a minimum annual financial turnover of Rs. 210.00 Lakhs. (Turnover certificate from CA with valid UDIN No. to be furnished along with necessary documents.)

Audited CA Certificate of Annual Turnover

Liquid assets and or availability of credit facilities of no less than Rs.25.57 Lakhs (Unconditional Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc).

Line of Credit

Others

PWD Registration Certificates (class I/II/III)

PWD Registration Certificate (Class I/II/III/IV)

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Not Applicable

Others -- Not Applicable

Fee & Financial Details

Tender Fee Amount

₹2,520

EMD Fee Amount

₹1.7 L

Important Dates

Last Activity

7 Nov 2024

Published

7 Nov 2024

Bid Opening

26 Nov 2024

Download Ends

14 Nov 2024

Pre-Bid Meeting

11 Nov 2024

BOQ Preview

•

Construction of Proposed 12TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) At CMC, Chintamani

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) . (Item No. 5.4 Page No. 9 Vol.2 PWD SR)

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing 20mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

KSRB 11-11.8.4:Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifica...

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

•

Supply, erection, testing and commissioning of LT Control Panel panel cubicle type made out of 14/16 Swg MS CRCA sheet which is derusted,degreased, phosphated and passivated with angle iron skeleton ...

•

LT Cables Supply & laying 1.1kV LT UG cable XLPE / heat resistant PVC insulated, PVC extruded inner sheath armoured as per IS:1554 part-1 or IS:7098 part-1, Armouring thickness +5% and resistivity 14 ...

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class.3.5Cx50 Sqmm Al Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx25 Sqmm Al Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx16 Sqmm Al Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx10 Sqmm Cu Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class4Cx6.0 Sqmm Cu Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class3Cx6.0 Sqmm Cu Un Ar cable

•

Supply & installation of LT Cables End termination - Heavyduty cable Glands suitable for UG cable of 1.1kV Class3Cx4.0 Sqmm Cu Un Ar cable

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point.50 Sqmm Preinsulated lug.CPTAU

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point25 Sqmm Preinsulated lug.CPTAU

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point16 Sqmm Preinsulated lug.CPTAU

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point 10 Sqmm Preinsulated lug.CPTAU

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point6.0 Sqmm Preinsulated lug.CPTAU

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point6.0 Sqmm Preinsulated lug.CPTAU

•

Supply & installation of Tinned Copper lugs crimping & wiring to terminal point4.0 Sqmm Preinsulated lug.CPTAU

•

Supplying & Fixing heavey guage PVC conduit type 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc, and shall be concealed in wall/RCC slab or exposed on fix...

•

Point wiring using Copper wire with switch Supply & wiring from switch board upto first light point & looped continously for the extent light points. Wire size 2x1.5 Sqmm Ph-N & 1x1.0Sqmm for E for po...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Switches & sockets outlets in Existing modular box 6A one way switch

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Switches & sockets outlets in Existing modular box6A three way switch

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Switches & sockets outlets in Existing modular box Stepped fan regulator

•

Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Switches & sockets outlets in Existing modular box 6/16A Universal socket

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip

•

Guy wire and GI wire as per IS 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM ,

•

Supply & installation of Cable Trays fixed with MS angles, hitech & anchor fastner supports at interval 0.9M interval shall be included complete run below ceiling/wall.Supplying & Laying cable trays i...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

chintamani04.11.24.doc

Tender Document • 1.26 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Other Works

Construction of Proposed 12TPD MRF Centre (Material Recovery Facility) of PEB Structure (PRIMARY & SECONDARY SHED) At CMC, Chintamani

Directorate Of Municipal Administration

DMA City Municipal Council Chintamani | Karnataka

Amount: ₹1.0 CrCloses: 25 Nov 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published7 Nov 2024
Closed25 Nov 2024
Retendered7 Nov 2024