Repair to facia chajja plastering roof projection flooring and certain misc BR works at Tech area Mil Stn Jaisalmer

Amount

Dismantling wrought iron or mild steel work of any description not othervise provided for

S&F, rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.

M&L for oiling & greasing to the MS shutters by removing the scales and make the shutters to swing freely all as specified & directed by Engineer-in-charge.

Repairs to MS door shutter weighing 750-1000 kg to swingfreely which is obstructig the movement due to pintel hinges is inclined inner wordsto align the shutter by means of hammering / welding/oiling, lifting the shutter by means of pully or crane by taking safety measures all as specified & directed by Engineer-in-charge.

S&F in repairs MS wheel of size 125mm dia and 32mm thick to the bottom of MS shutter by welding/ nut & bolting by taking fire safety precautions all as specified & directed by Engineer-in-charge.

Dismentling of existing RCC work as in chajjas ,tins facies,prapets,roof projection etc at any height and incl all necessary form work and making good the dismantled portion in PCC ,1:2:4 type B1 using 20 mm graded aggregete and making the surface smooth complete any thickness of RCC work ,the rate should be deemed to be inclusive of scaffolding, formwork and work to be carried out at any height. Note :-reinforcemrnt should pay and measurment seperatly.

Demolition of cement concrete (reinforced) in roof, roof projection, chajja and similer works in any position.

M&L for Renforcement cement concrete nominal mix 1:2:4 type B 0 using12.5 mm graded stone aggregate for chajja,roof projection,facies and similar works all as specified & directed by Engineer-in-charge.

Formwork to chajjas ,roof projection and similar work including edges including height upto 6 mtr.

M&L Deformed or twisted bars cut to length and bend to shape, 6 to 8mm dia including binding etc complete

S & F E grid suspended false ceing grid system of size 600x600mm with main runner 29x24.7x0.8mm cross tee 29x24.7x0.8mm and wall angle 22.2x22.2x0.65mm. Ceiling suspended with 4mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main runner, cross tee& wall angle of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling incl one coat of distemper complete including dismantling of existing false ceiling board of any description..

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any motor including removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Demolition floor hearth or wall tiling including cement mortar bedding and removing unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.

M&L for 75mm thk cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in subbase of flooring/hard standing as specified

M & L for 60mm thk, M 35 grade machine pressed precast concrete interlocking paver block rubber mould using grey cement and no pigment of any shape and size conforming to IS 15658 - 2006 laid overincl 25mm thk sand cushoining complete.

S & F chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cemnt and pigments,set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM 1:4 complete.

M&L for PCC 1:2:4, 50mm thick using 20mm graded aggregate as in flooring

M& L for PCC 75 mm thk type C1 1:3:6 (20mm graded stone aggregate laid in alternative as in plinth protection including finished the surface even and fair without using extra cement and filling the joints with mastic filling ie one part of bitumen 85/25 & 3 parts of sand by weight

M&L for machine cut kota stone flooring 550 x 550x 20 to 25mm thk laid over cement screed bed jointed & pointed with grey cement slurry mixed with pigment to match the shade including rubbing &mirror polishing including over a screed bed or bedding layer of 15mm thk in CM 1:6 for laying floor finishes all as specified and directed.

ditto above but on verticla surfaces such as skirting /dado etc including over a screed bed or bedding layer of 10mm thk in CM 1:3 for laying tiles all as speciifed.

Dismantling (corrugated , semi corrugated etc ) sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding/chajja roof projection etc fixed with self tapping screws as specified.

S&F, mild steel, angles, bars, flats etc, as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain, angle cleats for securing purlins to wood tress or rafters, knee piece inserts, two way and three way staps, plate washers and silmilar small articles confirming to Fe-290 Gde- E-165 complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone surfaces ofany position etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for rendering 10 mm thick plaster in cement mortar (1:3) mixed with WPC on concrete surfaces of roof top and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).

M & L for plastering 5mm in CM 1:4 on ceiling / chajja complete all as specified and directed.

M & L preparation of new plastered surfaces and applying three coat of white wash on walls complete

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling

M & L for two coats of cement base paint over a coat of cement primer on walls

M & L preparation of new steel surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer primer

M & L for preparing new /old plastered surfaces and applying two coats of oil bound distemper over one coat of primer wall putty including preparatory to distempering on surface of walls

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings,bed plates ,water through and the like including wethering ,slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and as directed by Enginneer in charge

M & L non skid ceramic coloured tiles exterior grade but exc 0.11 sqm and n.exc 0.18sqm 7 to 8 mm thk including screed bed or bedding layer 15mm thk in CM 1:6 all as specified.

All as per item No 36 above but as in skirting, steps etc in vertical surfaces with 10mm thick backing coat in CM 1:4

Taking up or down steel tubing and connections including cleaning for refixing or removal to store complete of 15mm bore pipe all as specified and directed.

All as per item No 38 above but 20mm bore of pipe.

S&F GI tubing medium grade 15mm bore complete all as specified and directed.

Refixing old GI connections in new or old postion (wall,ceiling , floors etc) 15 mm bore of pipe

S & F 20mm bore GI tubing medium grade fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc. ) 20mm bore of pipe

Dismantling water tanks and removing to store Exc 250 & n exc 500 liter

S & F Rototional mould ed polythylene water stage tankswhite 500 ltr (cylidrical verticial with closed top) hoisted and fixed in postion including float valve high pressure epoxy coated aluminium rod & plastic ball 20 mm dia complete.

M/S SHRI HARI CONSTRUCTION COMPANY

M/S JAGDAMBA ENTERPRISES

M/S RAM NIWAS BISHNOI

S K TRADER

AMBEY MAA CONSTRUCTION COMPANY

M/s Shri Inder Construction Company