Lighting work on the divider from Sector-06 Police Chowki to STP of Shatabdi Nagar Scheme. (Second Part)

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.SI No-642/2018

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. SI No-652/2018

S/F of LED Street light fitting with mandatory driver set having die cast aluminium body and diffuser suitable for 140 to 150 watt (Higher watt).confirming to IP 66 protection complete in all respects (as per direction of E/I) CAT-AA SI NO. 1425/2018

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. (as per direction of E/I) CAT-AA SI No-1455/2018

S/F of 40A TPN, capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting Of time switch TSO 100 serics with contactor, HRC fuse, isolated switch metring instrument and instrument box with CTs etc. in case of TPN, complete in all respect. SI NO. 807f(ii)/2018

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.SI No-501/2018 (j)25 sq. mm 3-1/2 core.

501 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (h) 10sq.mm 4 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SI No-501/2018 (i) 10 sq. mm (c )

Supply of 2.5 mm x 2 Core aluminium unarmourd Cable (PSR)

S/L of 63mm HDPE pipe for road crossing etc. (PSR)

Supply & Burying of earth rod 20mm Dia 2.50 mtr long. (PSR)

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.SI No-725(B)/2018

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve SI No-1002/2018

dismantling of existing Double Arm ST Pole SI No-609/2018

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SI No-501/2018) (ii) 16 sq. mm 4 core (i)

cartage of dismantle old material