Providing new 11kV PCVCBs/MCVCBs for bifurcation of load of overloaded 11kV feeders at 66/11kV sub-stations Hadavanahally, Sathenahally, Didaga, Baguru, Mallipatna, Bychanahally, Belavadi, Somanahally, K.Byrapura, Ramanathapura, Doddally, Channarayapatna, Mattanavile, Chikkabommenahally, Shravanabelagola and Doddamagge in Channarayapatna, Holenarasipura and Arakalagudu taluk, Hassan district Karnataka state on PTK basis

Supply portion of Providing new 11kV PCVCBs/MCVCBs for bifurcation of load of overloaded 11kV feeders at 66/11kV sub-stations Hadavanahally, Sathenahally, Didaga, Baguru, Mallipatna, Bychanahally, Belavadi, Somanahally, K.Byrapura, Ramanathapura, Doddally, Channarayapatna, Mattanavile, Chikkabommenahally, Shravanabelagola and Doddamagge in Channarayapatna, Holenarasipura and Arakalagudu taluk, Hassan district Karnataka state on PTK basis

O/D Single face ACDB with stand 1I/C 32A SFU with copper bus bar + 8 O/G feeders, 16 numbers 20A Fuse base with 10A HRC fuses, TB and cable entry glands with erection, wiring & foundation

O/D Single face DCDB with stand 1I/C 32A SFU with copper bus bar + 8 O/G feeders, 16 numbers 20A Fuse base with 10A HRC fuses, TB and cable entry glands with erection, wiring & foundation

O/D Single face PTDB with stand 1I/C 32A SFU with copper bus bar + 8 O/G feeders, 16 numbers 20A Fuse base with 10A HRC fuses, TB and cable entry glands with erection, wiring & foundation

1C x 1000 Sq mm, 11 kV HV UG Cable

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 240 Sqmm, (55 GI Wires - 3.15 mm Dia...

95 Sqmm, (54 GI Wires - 2.5 mm Dia)

Cable Termination kits suitable for following sizes as per techincal specification:

1 x 1000 Sq mm, 11 kV Heat Shrinkable Cable

termination kit for XLPE Cable ( Indoor type )

Cable Termination kits suitable for following sizes as per techincal specification:

1 x 1000 Sq mm, 11 kV Heat Shrinkable Cable

termination kit for XLPE Cable (Out door type)

b) Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

b) Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

b) Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

b) Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

U-clamp 5 inch - for cable support

LT AC Panel (Indoor) 415V as per technical Specification compraising of Ammeter voltmeter one I/C MCCB 200A+2 Nos 3Ph 63A outgoing SFU, + 2Nos of 3Ph 32A Outgoing SFU + 6NOs 3Ph SFU 16A.

DC Distribution Panel(Indoor) as per technical Specification compraising of Earth fault indicator, indication circuit for AC Mains failure, 1No 100A SFU for I/C+12 Nos. 32A SFU for O/G, complete as p...

11 kV isolator, Double break 800 A, capacity, with rigid bimetallic terminal connector suitable for Drake ACSR.

11 kV isolator:Double break 400 A, 25 KA capacity, with rigid bimetallic terminal connector suitable for coyote ACSR.

11kV Isolator: 11kV 400A Single Break GOS

11 kV isolator: Single break 400 A, 25 KA capacity with Roaster GOS, with rigid bimetallic terminal connector suitable for coyote ACSR.

11kV ODS and take off structures:

Supplying of G.I. D.P.Structures with all accessories using 9 mtrs long, 145Kgs working load RCC poles with provision for fixing 9kV LA's etc. complete

11kV Cable terminating structures for LV side of 66/11kV Tr

1B1-7.45 Mtrs long with clamps, Bolts and nuts 2Nos. (0.036x141680+0.0018x149270=5369.12)

1B2-4.00 Mtrs long with clamps, Bolts and nuts

RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as

per IS-785 (Both for ODS & DP)

Disc Insulator 90kN

11kV, 45 kN Polymeric Insulator

Bolted type tension clamp for single Coyote ACSR conductor 70/90kN 16mm

Bolted type tension clamp for single Drake ACSR conductor 70/90kN 16mm

C type wedge connectors Drake to Drake ACSR conductor

C type wedge connectors Coyote to Coyote ACSR conductor

C-type wedge connectors Coyote to Drake ACSR conductor

C-type wedge connectors Rabbit to Coyote ACSR conductor

Coyote 2 hole paddle C wedge connector 610A ( For Ct terminal Connection)

Coyote 4 hole paddle C wedge connector 610A ( For Ct terminal Connection)

Pad clamp for Drake ACSR conductor

Pad clamp for coyote ACSR conductor

PG clamp Coyote ACSR conductor

PG clamp Rabbit ACSR conductor

L Type Pad clamp for Coyote ACSR

LT distribution box fo 100KVA Auxillary Trnsformer

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 19 Core X 2.5 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4 Core X 4.0 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4 Core X 6.0 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4 Core X 2.5 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 2 Core X 2.5 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4 Core X 95 Sq.mm.

Earth Mat formation : Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by...

Name Plates for ground pits

Danger plate/ caution plates

Earth Bond 450mm long

Lightning Arrestors / SURGE ARRESTOR : (Procelain/Polymer housing): 9kV, 10kA L.A Metal oxide type (Station class) for coyote ACSR

Materials for new bay integration to existing SCADA panel: Multi Functional Transducer (MFT) 0.2s class including labour (Market Rate)

Materials for new bay integration to existing SCADA panel: Opto Coupler (220 or 110DC) including Labour 8 Channel

Contact multiplier Relay

Terminal Block (Knife type)(1set=8Nos)

Link TB's suitable for 0.5sq.mm & 1.5 sq.mm control cables

CT TBs suitable for 0.5sq.mm & 1.5 sq.mm control cables

Current Cables Copper core with 4 sqmm cross section multistrand 3core for CT termination

Voltage cables Copper core with 2.5 sqmm cross section multistrand 4 core for PT Termination

Materials for new bay integration to existing SCADA panel: Signal/ Communication Cables-Armoured copper core with 0.5sqmm cross section multistrand 10 core.

Materials for new bay integration to existing SCADA panel:Control Cables- Copper core with 1.5 sqmm cross section multistrand 10 core.

CT Terminal Blocks ( 1set=6Nos)

DI card along with patch cable including TB

DO card along with patch cable including TB

Dain rails C & g type TB channels suitable ring tubular and fork glands tape etc,.

Supplying of Fabricated Galvanised lattic type supporting structures for Yard light (7Nos)

Erection & Decommissioning portion of Providing new 11kV PCVCBs/MCVCBs for bifurcation of load of overloaded 11kV feeders at 66/11kV sub-stations Hadavanahally, Sathenahally, Didaga, Baguru, Mallipatna, Bychanahally, Belavadi, Somanahally, K.Byrapura, Ramanathapura, Doddally, Channarayapatna, Mattanavile, Chikkabommenahally, Shravanabelagola and Doddamagge in Channarayapatna, Holenarasipura and Arakalagudu taluk, Hassan district Karnataka state on PTK basis

11kV Switchgear - 11kV, PCVCB/MCVCB, 350MVA, 20kA - Incomer Panel- 1200A Feeder Panel - 800A Bus coupler Panel

Wiring and assisting in testing & commissioning

Shifting of Existing 11kV SWG panels

(2x2081) Releasing &Re-erection

Releasing & rewiring of 11kV SWG panels (2*941)

Erection of Announciator Panel

Erection of control panel, auxilary panel, carrier cabinet,

marshalling bay kiosk etc., alignment and fixing properly to

foundation base including movement from the ...

Wiring and assisting in testing & commissioning of Annunciator Panel

Releasing & re-erection of Annunciator Panel (2*4191)

11 kV, XLPE Insulated UG Cable as per Technical Specification: 11 kV class 3 X 240 Sq mm U G Cable XLPE(To be run from 11 kV switchgear to take off DP structure)

11 kV class 1 X 1000 Sq mm

11 kV class 3 X 95 Sq mm

Releasing and re-erection of XLPE Power cables for re-arrangement

Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 1x1000 Sq.mm XLPE cable ( Indoor type )

Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 1x1000 Sq.mm XLPE cable ( Outdoor type )

Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

Cable Termination kits suitable for following sizes as per techincal specification:

Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

LT AC Panel (Indoor) 415V as per technical Specification compraising of Ammeter voltmeter one I/C MCCB 200A+2 Nos 3Ph 63A outgoing SFU, + 2Nos of 3Ph 32A Outgoing SFU + 6NOs 3Ph SFU 16A.

DC Distribution Panel(Indoor) as per technical Specification compraising of Earth fault indicator, indication circuit for AC Mains failure, 1No 100A SFU for I/C+12 Nos. 32A SFU for O/G, complete as p...

11 kV isolator, Double break 800 A, capacity, with rigid bimetallic terminal connector suitable for Drake ACSR.

11 kV isolator, Double break 400 A, 25 KA capacity, with rigid bimetallic terminal connector suitable for coyote ACSR.

11 kV isolator, single break 400 A, 25 KA capacity with Roaster GOS, with rigid bimetallic terminal connector suitable for coyote ACSR.

Erection of H-frame

Re-erection of 11 kV isolator, single break 400 A, 25 KA capacity with Roaster GOS, with rigid bimetallic terminal connector suitable for coyote ACSR.

Releasing & refixing of DOLO (237*2)

Releasing & re-erection of Auxillary Transformer 100KVA (18592*2)

Erection of LT distribution box

Releasing & re-erection of LT distribution box of Auxillary Transformer

Releasing & re-erection of Capacitor Bank

11kV ODS and take off structures:

Supplying of G.I. D.P.Structures with all accessories using 9 mtrs long, 150Kgs working load RCC poles with provision for fixing 9kV LA's etc. complete

11kV UG cable mounting structure

RCC poles 9Mtrs long 145Kg Working Load

Releasing & re-erection of DP set

1B2-4.00 Mtrs long with clamps, Bolts and nuts

1B1-7.45 Mtrs long with clamps, Bolts and nuts 2Nos. (0.068+0.0034)*5723=408.62

Formation of Main/cross bus with single Drake -11kV

Formation of Main/cross bus with single Coyote -11kV

Lightning Arrestors / SURGE ARRESTOR : (Procelain/Polymer housing): 9kV, 10kA L.A Metal oxide type (Station class) for coyote ACSR

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 19 Core X 2.5 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4 Core X 4 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4 Core X 6 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4 Core X 2.5 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 2Core X 2.5 Sq.mm.

PVC insulated Copper Control Cable with Lugs & Ferrules - 1.1kV class. : 4Core X 95 Sq.mm.

Earth Mat formation :Grounding of equipments with 50 x 6 mm GI flat and connecting equipments to the earth mat/ground pit including all connected works with all materials supplied by the contractor....

Providing C.I. Pipe of 100mm ID 13mm thick 2.75 mtr. long with 2 part GI Flat 50x6mm clamp welded allround the pipe etc., including cost of excavation (all materials supplied by contractor) (Erection...

Supplying and providing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars for earth pits including all lead and lifts., (Supply & Erection)

Name Plates for ground pits

Danger plate/ Caution plate

Materials for new bay integration to existing SCADA panel: Fixing & Wiring of Multi Functional Transducer (MFT) 0.2s class

Materials for new bay integration to existing SCADA panel: Fixing & Wiring of Opto coupler

Configuration of RTU and Engineering along with validation of data at SLDC

Materials for new bay integration to existing SCADA panel:Control Cables- Copper core with 1.5 sqmm cross section multistrand 10 core.

Materials for new bay integration to existing SCADA panel: Signal/ Communication Cables-Armoured copper core with 0.5sqmm cross section multistrand 10 core.

Materials for new bay integration to existing SCADA panel:

Current Cables-Copper core with 4.0 sqmm cross section multistrand 3core for CT termination

Materials for new bay integration to existing SCADA panel:

Voltage cables- Copper core with 2.5 sqmm cross section multistrand 4 core for PT Termination

Design of Station Yard illumination in confirmity with the illumination levels mentioned in the Technical Specification, Supply and erection of Station Yard illumination materials/equipments including...

Yard lighting illumination: b)Supplying, fixing and wiring of 120W LED street light fittinfs with all fittings.

Yard lighting illumination: c)supplying and laying of 1.1kv LT UG cable (2core 6sqmm) PVC insulated galvanaised steel wire/tape armaourd cable in the existing trench/stone bere/running above the groun...

Yard lighting illumination: d)supplying and fixing inspection box switch board control box made out of 16 SWG ms sheet including fabricated with one coat of prime and two coat of apporved paint of siz...

Yard lighting illumination: e)supplying and fixing of modular MCB device 16 to 32A SP

Yard lighting illumination: f)suppling and fixing of PVC conduit pipe and acessary of apporved guage of 2mm thick , 25mm dia with 2(3/20) copper wire.

Releasing of GI DP structure with all accessories using 9 Mtr long 145Kgs working load RCC poles and complete

Releasing of LT distribution box

Releasing of wiring of C&R Panels

Relasing of Annuncaitor window

Releasing of Coyote conductor

Releasing of 11kv Isolator, single Break 400A, 25kA

Releasing of 11kv Isolator, Double Break 800A, 25kA

Releasing of Poles of DP set

Releasing of 200A S/B GOS

Releasing of UG cable 3x240 sq.mm

Releasing of UG cable 3x95 sq.mm

Releasing of Bus-coupler Panel

Civil Portion of Providing new 11kV PCVCBs/MCVCBs for bifurcation of load of overloaded 11kV feeders at 66/11kV sub-stations Hadavanahally, Sathenahally, Didaga, Baguru, Mallipatna, Bychanahally, Belavadi, Somanahally, K.Byrapura, Ramanathapura, Doddally, Channarayapatna, Mattanavile, Chikkabommenahally, Shravanabelagola and Doddamagge in Channarayapatna, Holenarasipura and Arakalagudu taluk, Hassan district Karnataka state on PTK basis

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...

Providing and laying in position plain cement concrete of mix 1:4:8 (M5) using 40mm nominal size graded crushed coarse aggregate for levelling course for all works in foundation. The granite/trap/bas...

Providing and laying in position plain cement concrete of mix 1:2:4 using 20mm nominal size graded crushed coarse aggregate for levelling course for all works in foundation. The granite/trap/basalt c...

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding whereever necessary com...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Jelly Spreading : Supplying and providing 20/25 mm jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete. ...

Providing PVC ringtite pipes confirming to IS 4985:2000 with latest amendments and conyeying to worksite, rolling and lowering into trenches, laying true to line anfd level and perfect linking at joi...

Providing M-Sand : Supplying and filling in plinth,foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, lab...

Providing Bricks for UG cable work

Providing and laying in position Reinforced cement concrete M20 Design Mix 20mm down nominal size graded crushed coarse aggregates for Raft using granite/trap/basalt crushed graded coarse aggregates ...

Providing and laying in position Reinforced cement concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for Side wall/Pedestal/earth retaining structures including Form W...

Providing and laying in position Cement Concrete for all Super structures of building upto 3.50 m height Plinth beam and Roof Slab The granite/trap/basalt crushed graded coarse aggregates and fine agg...

Providing and laying in position Cement Concrete for all Super structures of building upto 3.50 m height Column The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per rel...

Providing and laying in position Cement Concrete for all Super structures of building upto 3.50 m height Lintel beam and Roof beam The granite/trap/basalt crushed graded coarse aggregates and fine ag...

Providing and laying in position Cement Concrete for all Super structures of building upto 3.50 m height Chejja The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per rele...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6(1cement : 6 coarse sand) including cost of all materials, labour,...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approv...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Removing & Respreading from the yard and conveying to the place as per the direction of Engineer in charge including labour, HOM of machinery etc. complete as per specification.

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

Providing and Finishing walls with water proofing cement paint of required shade in Two coats applied @ 4.84 kg/10 m² to give an even shade including applying one coat of water thinnable cement prime...

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of w...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G....

Providing PVC ringtite pipes confirming to IS 4985:2000 with latest amendments and conyeying to worksite, rolling and lowering into trenches, laying true to line anfd level and perfect linking at joi...

Providing PVC ringtite pipes confirming to IS 4985:2000 with latest amendments and conyeying to worksite, rolling and lowering into trenches, laying true to line anfd level and perfect linking at joi...

Providing and Finishing walls with water proofing cement paint of required shade in Two coats applied @ 4.84 kg/10 m² to give an even shade including applying one coat of water thinnable cement prime...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Electrififcation works for MCVCB Shelter platform

Providing RCC Hume pipe 2000mm long 150mm dia

RCC Hume Pipe 2000mm long 200mm dia for laying of Power cable under road crossing (supply-390 laying-69)

Collars for RCC Hume pipe 200mm dia

Earth work in surface excavation for stipping, seating of bund, road way by manual means for lowering & levelling the ground for all the works other than foundation & depth in all kinds of soil not ex...

Supplying heavy gauge PVC conduit pipe 25mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc,. And fixing using inverted wood plugs in case of RCC ceil...

Providing and laying in position plain cement of mix 1:3:6 (M10) using 20mm nominal size graded crushed coarse aggregates concrete for levelling course for all works in foundation. The granite/ trap/ ...

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of masonry cement concrete, wood works, steel work, including T&P and scaffolding wherever ne...

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of masonry cement concrete, wood works, steel work, including T&P and scaffolding wherever ne...

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02cum in volume and stock piling at designated locations and disposal of dismantle...

Minor fabrication works for MCVCB Platform

Electrification Works for Switchgear Shealter platform

Supplying and Point wiring using Copper wire without switch.

a) Short point up to 3Mtr from tapping point to out let via switch box

Electrification Works for Switchgear Shealter platform Supplying and Point wiring using Copper wire without switch.

b) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch b...

Electrification Works for Switchgear Shealter platform Supplying and Point wiring using Copper wire without switch.c) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch box.

Electrification Works for Switchgear Shealter platform Point wiring using Copper wire without switch.d) Two outlet in a row, above 3Mtr up to 6Mtr from tapping point to out let via switches box.

Concealed Conduit System Supplying heavy gauge PVC conduit 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before conc...

Concealed Conduit System Supplying heavy gauge PVC conduit 25mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concr...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket.

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch.

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of 1 x 4' - 36/40 W PVC Batten with integrated LED tube with high quality diffuser with Life of 25000 burning hours 2 years Warranty against any manufacturing defect working under...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...