Improvement works for existing AEE O M Siruvachur Office building by providing flooring tiles replacing doors and colour washing work at Siruvachur 110 22 KV SS premises

Amount

Dismantling the existing Brick masonry, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer inchatge of the work .

Dismantling the existing PCC and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work

Dismantling the existing Doors and Windows including removal of frames, hinges and fastenings disposing the wooden scrap materials 1 Km away from the site including cost of all labour charges , lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work .

Supplying and filling the basement and foundation with M.sand watering and consolidation etc., including cost of materials, labour, lead, lift, T&P etc., and as directed by the Engineer incharge of the work.

PCC 1:4:8 using 40mm HB stone for foundation, flooring, etc., in the following levels as instructed by the Engineer in charge including cost of all materials, labour, lead lift, T&P, etc., complete.

Brick works in Cement mortar 1 : 5 using Country bricks size 8 1/4" x 4 1/4" x 2 1/4" including cost of all materials, labour lead, lift, curing, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Fabrication,supply & fixing of steel framed double leaves door using 50x50x6mm MS angle for door frame, 40x40x6mm MS angle for shutter frame,25x6mm MS Flat for stiffner, 16gauge MS sheet for panels,painting 2 coats with enamel paint over one coat of red oxide as directed by the Engineer in charge including cost of all materials,labour,lead,lift,etc., complete-

Chipping the existing plastering, and disposing the debries 1 Km away from the site including cost of all labour charges , lead, lift, etc., complete and as directed by the Engineer inchatge of the work.

Plastering with C.M 1:3, 10mm thick including cost of cement all materials labour, lead lift, curing,T&Ps etc., complete and as directed by the Engineer incharge of the work.

Plastering with C.M 1:5 12mm thick including cost of cement all materials labour, lead, lift, curing, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Flooring with approved ceramic of non slippery type tiles over cement mortar 1:2, 12mm thick including pointing with white cement finishing the joints, flush pointing the surface cost of all materials labour lead lifts etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing of New Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter and including cost of all materials, labour, lead, lift, T&Ps etc., complete as directed by Board Engineer at site.

Providing dadooing the inside of toilet walls with glazed tiles 300*200 to a height of 2.10m over cm 1:2 10mm thick and joints shallbe finished with white cement including cost of all materials lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Supplying and fixing white ORIYA TYPE water closet with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials, labour, lead, lift, etc., complete as per standard specification.

Supplying and fixing of wash hand basin of size 550mm x 400mm with all accessories such as cast iron brackets , 32mm dia C.P. waste coupling, rubber plug and chain, 32mm dia “ B “ class G.I. waste pipe, 15mm dia G.M. wheel valve , 15 mm dia nylon connection, 15 mm dia brass nipples, 15 mm C.P. pillar tap etc., including cost of all materials, labour lead, lift, etc., complete.

Supplying and fixing best quality of mirror of size 600x450mm mirror with SS soap tray, 600 mm SS towel rod, screws and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge of the work.

Supply and fixing of 75 mm dia 6kg/CM2 PVC pipe with necessary specials, including cost of all materials, labour, leads, lift, T&Ps etc complete and as directed by the Engineer incharge of the work.

Supplying and fixing in position of 20mm dia UPVC pipes (schedule-40) with ISI monogram with necessary clamps and adhesive solution, etc., including cost of materials,labour, lead, lift,T&Ps etc. Complete and as directed by the Engineer incharge of the work.

Providing and fixing up of 20mm dia Gun metal wheel valve including fixing charges materials, lead, lift, T&Ps etc., complete and as directed by the Engineer incharge.

Providing and fixing of 12mm screw down bib cock water supply tap including cost of pipe and labour fixing charges lead, lift, T&P and as per standard specification etc. Complete and as directed by the Engineer incharge of the work.

Supply and fixing of 100 x 75 mm PVC Nahni trap with grating including cost ofall materials, labours, lead, lift, T&P etc., complete and as directed by the Engineer incharge of the work.

White washing Two coats with white cement including cost of all materials, labour, lead, lift etc complete and as directed by the Engineer incharge of the work.

Painting the outside wall with two coats of best quality exterior emulsion of approved colour over a interior primer coat of all materials, etc., complete and as directed by the Engineer incharge of the work.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete and as directed by the Engineer incharge of the work.

supply, Fabrication and erection of steel rafters, purlins as directed by the department engineer in charge including cost of all materials labour,lead, lift, T&Ps etc complete..

Providing Galvalume Colour Sheet of size 0.47mm Pre painted Sheet roofing edge Curved as directed by the Department Engineer in charge including cost of all materials lead, lift, T&Ps etc., complete.

Removal of existing damaged doors & windows and dismantling and cleaning of damaged roof slab by " AS IS WHERE IS " condition. This amount will be deducted in the CC I & Part bill for this work.

KATHIRAVAN R (BID ID -1386596)