PROVISION OF MACHANICAL LAUNDRY IN DHOBHIGHAT BLDG NO. T-88 AT KALIMPONG UNDER GE 867 EWS

Amount

S & F Industrial washing Machine Top load cap (30 Kg) , Dry weight per charge , open pocket , Heavy duty, Electric and Stem heated both options , Inner Basket and outer drum Stainless Steel, Auto timed , Auto Reverse & forward , Digital temperature Controller totally SS 304 Inner & outer body , V-Belt Drive, Water feeding and Drain system with control panel , Stainless Steel front door operates on 415 V, 3 Phase 50 Hz AC supply . Operation cycle 30 to 35 Min including provision of platform for placing of washing machine as per manufacturer's instructions fixing with suitable bolts & nuts and grouting and suitable copper conductor cable from main DB to machine complete all as specified and directed by Engineer-in-charge. Make: XSONI SYSTEMS Model No. NXE 30 or Techno commartially equivalent make as approved by GE.

S & F Hydro Extrator loading capacity of 15 Kg SS 304 inner & outer body, Direct Drive , Self Balancing , Automatic DC Injection Brake , Auto timed , Inner cage and outer drum Stainless Steel. Specially designed Eletric Motor and Control including provision of platform for placing of Hydro Extrator as per manufacturer's instructions fixing with suitable bolts & nuts and grouting and suitable copper conductor cable from main DB to machine complete all as specified and directed by Engineer-in-charge. Make: XSONI SYSTEMS Model No. NH 15 or Techno commartially equivalent make as approved by GE.

S & F Drying tumbler with loading capcity 30 Kg front loading , Open pocket, Eletric heated with per charge complete with Micro controller based controller for fully automatic programs, consists of auto timed, Auto reversed - forward , Auto Digital Temperature Control , Cool Down system, Large display for clear visibility of status of machine . One motor each for drive and blower, double walled glass wool insulated outer body mild steel, inner basket stainless stell, Self lint Screen, V belt drive , Waste air exhaust etc operates on 415 Volt , 3 Phase , 50 Hz AC supply including provision of platform for placing of Drying tumbler as per manufacturer's instructions fixing with suitable bolts & nuts and grouting and suitable copper conductor cable from main DB to machine complete all as specified and directed by Engineer-in-charge. Make: XSONI SYSTEMS Model No. NXE 30 (Electric Heated) or Techno commartially equivalent make as approved by GE.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5 in depth for taking out /laying of cable etc., and getting out in soft/loose soil.complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge.

Removing surplus excavated soil to a distance not exceeing 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

Supply and laying in trenches, fixed to wall or drawn through pipe etc., XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core and connecting with necessary lugs including taking out exising unserviceable cable complete all as specified and directed by Engineer-in-Charge. Note:- Excavation, earth work, brick protection, protection pipe and sand coushioning shall be measured and paid separately. Make of cable shall be CCI / Gloster / ICC / Unistar / NICCO / Asian (RPG) / Havells / Polycab/PRG/Universal/Plaza/Crystal cables/Terracom/ Rallison/Mescab/Jeypore/KEI

Supply and spreading of dry sand in trenches for cable coushioning and punned down complete all as specified and directed by Engineer-in-Charge. Note:- Punned thickness only shall be measured for payment purpose.

M&L for un-reinforced LT cable covers, class LV, Type 1, flat of size 250mm x 150mm x 40mm including taking out existing unserviceable cable covers/bricks complete all as specified and directed by Engineer-in-charge.

S&F sheet metal enclosure DB TPN 4 way 415 V with 200 Amp rated bus bar, powder coated double door including taking down old unserviceable DB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB TPN 32 Amps, 10 KA breaking capacity, 415 volts, 50 Hz including taking down old unserviceable MCB complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of MCB TPN 63 Amps, 10 KA breaking capacity, 415 volts, 50 Hz including taking down old unserviceable MCB complete all as specified and as directed by Engineer-in-Charge. Make for Item No. 10 to 12: (i) Legrand (ii) ABB (iii) L&T, (iv) GE Power (v) Siemens (vi) Schnider

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1:3:6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, 15 mm GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I complete all as specified and as directed by Engineer-in-Charge. NOTE: Rate quoted shall be deemed to include for earth lead and protection pipe upto 7.5m.

M&L for Plain cement concrete 1:4:8 mix type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in cills, steps, bands and coping including necessary formwork, weathering, slightly rounded or chamfered andgles, finishing of exposed surfaces of concrete to fair and even complete all as specified and directed by Engineer-in-Charge.

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4, surface finished fair and even all as specified and directed by Engineer-in-charge.

Supply and fixing Rotational moulded polyethylene water storage tank cylindrical vertical double layered 2000 ltrs capacity with closed top hoisted and fixed in position all as specified in SSR Part I complete all as directed by Engr in charge Make: SINTEX/ INFRA/ GP/ ROTEX/ ORIPLAST/ ASHISH/ POLYCON

S&F 25mm bore GI water tubing medium grade with all fittings and fixed to wall, floor, ceiling or laid in trenches complete all as specified and as directed by Engr-in-charge. Make: TATA/JINDAL/ZENITH

S&F gun metal gate or globe valves 25 mm bore, with iron wheel head, screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge. Make: LEADER/ANCHOR/NETA/ZOLOTO/ NMC

S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints laid in trenches or under floors including cutting of floor/hardstanding and making good the disturbed surface complete all as directed by Engineer-in-charge complete all as directed by Engr-in-Charge. Make: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME

SANJAY SAW MILL

SANJAY MITTAL

DEEP CHANDRA JOSHI

MS MAYA PRAKASH GOEL AND SONS

M/S G. K. SUTHAR

C. M. AGARWAL AND CO

GARGO TRADERS