PROVIDING MOSQUITO NET AND OTHER ARRANGEMENTS FOR THE WORK OF CONSTRUCTION OF ADDITIONAL BOYS HOSTEL BUILDING WITH 300 CAPACITY IN GOVERNMENT COLLEGE OF TECHNOLOGY IN COIMBATORE DISTRICT

Manufacturing, Supplying and fixing position of UPVC Mosquito net arrangements with the own sliding frame of size 60mm x 30mm and sliding frame with Sliding shutter of size 52mm x 20.00mm the stainless steel Mosquito net SS 302 grade with size of 18 x 16 wire diameter 0.18mm. The Mosquito net arrangement should be fixed with 100% packing with Screws, Silicon packing all around the frames with including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column/wall, masonry walls, Window frames, wherever necessary with drills to the required extent and make good to the original conditions after fixing and also as directed etc., complete complying with standard specification and as directed by the departmental officers.

Designing the Semi Unitised Structural Glazing System with open groove joint as per design intent, preparation of shop drawings for approval, supply, fabricate, erect as per approved shop drawings at all floor levels and all floor heights including conducting field test as per the test criteria set out in the particular specification (Metholodgy should be got approved by the Dept. Officials.) Design the framing system (i.e. male & Female frame) to support vision panels, spandrel panels either with glass or aluminium composite panel, openable, window panels on a continuous framing supported between floors. Also design the split framing unutilized glazing system in case of strip or punched windows with vision panel proposed with either insulated / Monolithic glass, groove width in the system both in horizontal and vertical shall not be more than 20mm. Glazing of panel shall be done only at factory at the controlled atmosphere

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and laying of Interlocking Paver Block Stone 83mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.

Providing the texture finish to the newly plastered wall with ready made texture putty with patterns at all levels including the cost of coating, labour charges and other incidental charges etc..complete as directed by the departmental officers

Supplying and fixing of STAINLESS STEEL SINK of size1200 x 550 x 180mm etc.,complete as directed by the departmental officers

Supplying, Installing and commissioning of 304 grade Stainless steel UV Water Purifier of size 600 x 525 x 1360mm with flow rate of 200 Itr/Hr and following specifications. The purifier consists 3 water dispenser options with storage capacity of 40 ltrs for Normal water, 4 ltrs for Hot water and 40 ltrs for cold water including 3 taps. 25 watts UV bulb of approved make is located in the UV chamber of size 50 x 560mm including Micro controller works continuosly during purification process etc., complete complying with standard specifications as directed by the Departmental officers.