CONSTRUCTION OF TOILET COMPLEX (SINGLE STOREY) IN THE CAMPUS OF CIVIL COURT GAYA FOR THE YEAR 2026-27

BILL OF QUANTITIES FOR CONSTRUCTION OF TOILET COMPLEX (SINGLE STOREY) IN THE CAMPUS OF CIVIL COURT GAYA FOR THE YEAR 2026-27

Estimated Cost . Rs.

Earnest Money - Rs.

Cost Of BOQ .- Rs.

Time Of Completion -

Sl . No. SOR Item No. Item of Work Civil work Septic Tank Boring Total Quantity Unit Rate (Rs.) Amount (Rs.) #REF!

1 0L01 Prov Un-skilled labour for site cleaning do all complete 10.00 0 5 15.00 nos 355.42 5,331.00

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil 56.28 21.77 0 78.05 cum 360.70 28,153.00

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 34.24 1.36 0 35.60 cum 287.30 10,228.00

4 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 263.89 8.92 0 272.81 sqm 283.30 77,287.00

5 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 10.58 0 0 10.58 sqm 3998.10 42,300.00

6 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 16.79 0 0 16.79 cum 4688.30 78,717.00

7 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 90.23 0 0 90.23 cum 123.90 11,179.00

8 6.1.14C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 8.10 0 0 8.10 cum 4923.00 39,876.00

9 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 2.63 0 0 2.63 cum 5670.00 14,912.00

10 5.3+5.33B.4 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). Add or deduct for providing richer or leaner mixes respectively at all floor levels. Providing M-15grade R.C.C instead of M-20 grade R.C.C. 20.59 1.18 0 21.77 cum 5719.70 124,518.00

11 5.22.7A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-8mm dia. 1620.00 31.58 0 1651.58 kg 94.50 156,074.00

12 5.22.7B Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-10mm dia.. 900.00 50.08 0 950.08 kg 92.60 87,977.00

13 5.22.7C Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars TMTC-500-12mm dia. 1080.00 6.85 0 1086.85 kg 90.80 98,686.00

14 5.9.1 Centring and shuttering including strutting,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete. 40.20 0 0 40.20 sqm 211.60 8,506.00

15 5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. 102.06 1.67 0 103.73 sqm 404.70 41,980.00

16 5.9.6 Centring and shuttering including strutting,propping etc. and removal of form for. Columns,Pillars, Piers, Abutments, Posts and Struts 62.70 0 0 62.70 sqm 494.40 30,999.00

17 5.9.3 Centring and shuttering including strutting,propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 97.90 6.08 0 103.98 sqm 437.50 45,491.00

18 5.9.19 Centring and shuttering including strutting,propping etc. and removal of form for. Weather shade,Chajjas, corbels etc. including edges 1.74 0 0 1.74 sqm 550.90 959.00

19 5.9.16.1 Centring and shuttering including strutting,propping etc. and removal of form for. Under 20 cms wide 41.40 0 0 41.40 sqm 130.20 5,390.00

20 6.1.14C+6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 40.03 0 0 40.03 cum 5765.20 230,781.00

21 6.1.12C+6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand ) Extra tor Brick work in superstructure above plinth level upto floor V cum 3.57 0 0 3.57 cum 5958.50 21,272.00

22 12.52.2 Grading roof for water proofing treatment with Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2.95 0 0 2.95 cum 3932.20 11,600.00

23 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 104.55 0 0 104.55 sqm 795.00 83,117.00

24 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 221.14 0 0 221.14 sqm 141.50 31,291.00

25 13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6 (1 cement: 6 coarse sand) 144.53 0 0 144.53 sqm 162.80 23,529.00

26 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 60.47 0 0 60.47 sqm 125.60 7,595.00

27 13.17.2 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a floating coat of near cement Details of cost for 10 sqm 29.80 0 0 29.80 sqm 192.20 5,728.00

28 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 15.24 0 0 15.24 mtr 1087.80 16,578.00

29 11.40 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 29.38 0 0 29.38 sqm 1414.00 41,543.00

30 8.2.1.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm 29.75 0 0 29.75 sqm 2615.30 77,805.00

31 11.19.1 Chequered terrazo tiles 22 mm thick with marble chips of sozes upto 6 mm in floors jointed with neat cement slurry mixed with pigement to match the shade of the tiles, including rubbing and polshing complete on 20 nm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) Light shade using white cement 55.61 0 0 55.61 sqm 970.20 53,953.00

32 26.86.3 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm 46.04 0 0 46.04 mtr 788.20 36,289.00

33 26.87.1 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick 14.64 0 0 14.64 sqm 3866.50 56,606.00

34 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 168.82 0 0 168.82 kg 546.80 92,311.00

35 10.12.1+10.13.C Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. Doors Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators and comosite units. Steel ventilators 3.01 0 0 3.01 sqm 3444.20 10,367.00

36 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 54.20 0 0 54.20 kg 144.50 7,832.00

37 13.80 A.2 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 382.05 0 0 382.05 sqm 105.40 40,268.00

38 13.77.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer 177.06 0 0 177.06 sqm 102.30 18,113.00

39 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 144.53 0 0 144.53 sqm 137.00 19,801.00

40 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 11.16 0 0 11.16 sqm 1683.80 18,791.00

41 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 14.87 0 0 14.87 sqm 436.60 6,492.00

42 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 2.00 0 0 2.00 each 4470.90 8,942.00

43 17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including ntegrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 3.00 0 0 3.00 each 14663.50 43,991.00

44 17.4.2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 1.00 0 0 1.00 each 5733.30 5,733.00

45 17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 5.00 0 0 5.00 each 2369.90 11,850.00

46 17.32.4 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm 6.00 0 0 6.00 each 1515.20 9,091.00

47 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 5.00 0 0 5.00 each 434.20 2,171.00

48 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 5.00 0 0 5.00 each 715.10 3,576.00

49 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 7.00 0 0 7.00 each 594.80 4,164.00

50 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore 5.00 0 2 7.00 each 500.40 3,503.00

51 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 3.00 0 0 3.00 each 299.40 898.00

52 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms. 5.00 0 0 5.00 each 96.80 484.00

53 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour,weighing not less than 88 gms. 5.00 0 0 5.00 each 204.70 1,024.00

54 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore 2.00 0 4 6.00 each 399.20 2,395.00

55 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000.00 0 0 2000.00 ltr 9.70 19,400.00

56 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 7.00 0 0 7.00 each 886.20 6,203.00

57 17.34.1 Providing and fixing toilet paper holder : C.P. brass 3.00 0 0 3.00 each 550.70 1,652.00

58 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 1.00 0 0 1.00 each 33603.40 33,603.00

59 19.30.1.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 8.00 0 0 8.00 each 4266.80 34,134.00

60 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 30.49 0 0 30.49 mtr 257.50 7,851.00

61 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm 11.00 0 0 11.00 each 182.72 2,010.00

62 12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm bend 12.00 0 0 12.00 each 132.00 1,584.00

63 12.79.3.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110x110x110mm 8.00 0 0 8.00 each 193.40 1,547.00

64 12.79.4.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110x110x110 mm 5.00 0 0 5.00 each 190.70 954.00

65 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia Pipes 30.49 0 0 30.49 mtr 278.20 8,482.00

66 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes 12.20 0 0 12.20 mtr 350.80 4,280.00

67 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes 9.15 0 0 9.15 mtr 294.70 2,697.00

68 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes 9.76 0 0 9.76 mtr 359.10 3,505.00

69 12.46 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. 5.00 0 0 5.00 each 72.00 360.00

SEPTIC TANK 0.00

70 4.1.2 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 0.00 1.36 0 1.36 each 4420.80 6,012.00

71 6.1.12/1 Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 0.00 6.98 0 6.98 cum 5017.90 35,025.00

72 13.17.1+13.36.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 12 mm cement plaster 1:3(1 cement :3 sand) 0.00 44.79 0 44.79 sqm 212.60 9,522.00

BORING WORK 0.00

73 24.1.1.1 Boring /Drilling bore well all Type of Soil (300mm) dia. 0-90m (300mm dia) 0.00 0 90.00 90.00 mtr 486.80 43,812.00

74 24.3.2 Supplying Lowering and fixing 150mm dia U.P.V.C Pipe in Bore well 100mm dia U.P.V.C Pipe 0.00 0 75.00 75.00 mtr 660.10 49,508.00

75 24.4.2 Supplying lowering and fixing U.P.V.C Medium Sereen pipe with Ribs 150mm dia U.P.V.C Pipe 0.00 0 15.00 15.00 mtr 673.50 10,103.00

76 24.15.2 Providing and fixing Bottom plug 150mm dia 0.00 0 1.00 1.00 each 281.80 282.00

77 24.14.2 Providing and fixing MS Clamp 0.00 0 1.00 1.00 nos 1531.40 1,531.00

78 24.13.2 Providing and fixing MS well Cap 150mm dia 0.00 0 1.00 1.00 nos 210.70 211.00

79 24.8 Providing Gravel packing in tubewell including all complete. (22/7)/4 [(0.3)2-(0.5)2] *90m 0.00 0 4.56 4.56 m3 1343.20 6,125.00

80 24.12 Boring Developing charge by compressure machine upto 10 hrs. with all labours and suitable equipments 0.00 0 8.00 8.00 hrs 916.80 7,334.00

81 18.17.2 Providing and fixing 32mm dia Gun Metal Gate Value. 32mm dia 0.00 0 2.00 2.00 nos 589.90 1,180.00

82 18.47.4 Providing and fixing G.I Union. 32mm dia 0.00 0 2.00 2.00 nos 519.70 1,039.00

83 18.7.5 40 mm nominal outer dia Pipes 0.00 0 65.00 65.00 mtr 538.40 34,996.00

85 25/ S/F/f 2HP Motor Pump (1 unit) with 32 mm dia clamp (1 Unit), suitable Length Cable, Panel Board & Starter (1 No), Centre Guide (6 No.), Machine Up and Down etc, all complete. 0.00 0 1.00 1.00 nos 22873.00 22,873.00

86 MR Supplying & instalation Of Baby Daiper Changing station (steel) Equipped with safety belt to secure baby when changing diapers. Materials ss304 Grade Unit Dimensions 905mm (W)*520mm (H) Depth (closed) 104mm Extensions (open) 495mm Maximum Load 25kg. 1.00 0 0.00 1.00 nos 67914.00 67,914.00

87 MR Supplying & instalation of Sanitry venmg machine (720*180*490 1.00 0 0.00 1.00 nos 27396.00 27,396.00

88 Carriage of materials 0.00

Total Rs 2,496,291.00

NS item Rs 118,183.00

SOR & DSR Rs 2,378,108.00

Correctiion Factor 0.982 on SOR & DSR Rs 2,335,302.00

5.36% Additional GST Rs 125,172.00

Total Amount Rs 2,578,657.00

EXECUTIVE ENGINEER BUILDING DIVISION, GAYA JI