SPECIAL REPAIRS TO BLDG NO 52 AND ROOF SHEET OF POP SHED NO 238 AND 239 AT CHUNNILAL PARADE GROUND AT NCC OTA KAMPTEE.

Amount

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering complete all as specified and directed.

Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A complete all as specified and directed.

M&L for 0.50mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping brass screw as per manufacturer instructions complete all as specified and directed.

M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of any colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping brass screw as per manufacturer instructions complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated wall surfaces and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coats of exterior grade acrylic emulsion weather proof paint over a coat of acrylic primer complete including scaffoldings etc complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces on wall including brooming down or steel wire brushing, scraping down moulds, washing down and applying two coats of exterior grade acrylic emulsion weather proof paint over a coat of acrylic primer complete including scaffoldings etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality not exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

S&F in repairs fancy type curtain Rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

Demolition of un-reinforced cement concrete in any description and in any position and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of Cresoting Oil complete all as specified and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 2x1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1x1.50 sqmm with proper colour coding pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 26.00 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 26.00 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 26.00 above but one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.

All as per item No 26.00 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x2.5Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note :- (i) Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. (ii) 1x2.5 Sqmm + 2x2.5 Sqmm wire + 1 Run PVC conduit pipe shall be measured in one unit RM.

All as per item No 31.00 above but cable of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed.

All as per item No 31.00 above but cable of size 2x6.0 Sqmm with earth wire of 1x6.0 Sqmm complete all as specified and directed.

S&F for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes complete all as specified and directed.

S&F ceiling rose surface type 3 terminal 5 amps complete all as specified and directed.

S&F 0-4 step 2 module modular type electronic regulators for ceiling fan 1200/1400mm sweep, 240 volts, 120 watt single pole complete all as specified and directed.

S&F 18-22 Watt LED tube light fittings complete with aluminum body including tube rod, dirver with not less than 2000 Lumen O/P and l/p rated voltage 240 V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make & Model : Philips Astra Line CG LDC-20-CDL/ PHilips / Wipro / Havells

S&F highly durable surface mounted 09/10 watts LED 2 feet batten/ surface constructed of fire retardant engineering grade extruded plastic and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make: Bajaj / Havells / Crompton

S&F LED suspended luminaires 36W 240V 50Hz with aluminium die cast housing powder coated, hanging wire and suspendors with suitable connecting wires complete all as specified and directed. Make: Bajaj / Syska / Wipro / Jaquar

S&F LED luminaires 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Bajaj / Havells / Crompton

S&F LED light fitting 9W bulk head luminaries with lamp holders etc complet with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed. Make:- Bajaj / Syska / Wipro/ Jaquar

S&F building security light LED 25 W with luminaire efficacy of 100 lumen/watt with driver with rated cvoltage 240 V, 50Hz, including mounting GI (made out of 25mm dia grade pipe 0.8 m bent two shape including FI clamps nout bolts etc complete all as specified and directed. Make : CG LSTS-25-CDL/Philips/Wipro

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F MCB single pole & neutral 240 volt 'C' series 6 to 40 amps 10 KA, complete all as specified and directed. Make :- Legrand / Havells /L&T

S&F MCB triple pole & neutral 240 volt 'C' series 40 to 63 amps 10 KA, complete all as specified and directed. Make:- Legrand / Havells /L&T

S&F MCB single pole 240 volt 'C' series 6 to 40 amps 10 KA, complete all as specified and directed. Make:- Legrand / Havells / L&T

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete (1:2:4) type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.93,626.50]

M/s Rahul Traders

DEESHA CONSTRUCTIONS

M/s T.S.JOHAR

chronicle enterprises

M/S Darshan Singh Plaha

Bidder Name

chronicle enterprises

M/S Darshan Singh Plaha

DEESHA CONSTRUCTIONS

M/s B S Jain

M/s Rahul Traders

M/s T.S.JOHAR