REPAIR MAINT OF SECURITY LIGHT STREET LIGHT PERIMETER LIGHTS HIGHMAST LIGHTS SOLAR LIGHTS AND THEIR CONNECTED ITEMS AT OLD CANTT GE GANGTOK

Supply and laying of DWC pipe,ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket,bend,couplers etc confirming to IS 14930,part-II complete with fitting cutting,jointing etc of size 40 mm outer dia complete all as specified and directed by Engr-in-Charge. Note pipe provided sshall be of black colour

Taking up/down existing defective cable/ACSR conductor of sizes 2/4 core 10 to 16 sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including relaying in same or different position/location complete all as specified and as directed. Note: one run of cable and 2 run of ACSR conductor shall be measured as single unit

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 2 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 4core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

S&F in replacement of 20 mm dia rigid non metallic PVC Conduit inclusive of all tee, bends,reducers, bell mouth tube ends and fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

Repairs to street light fitting any type, solar or conventional type in situ by checking for any loose connections, jointing of wires, replacement of LED drivers and its settings, checking for earth continuity and testing complete all as specified and as directed. Note-(i) LED drivers measured and paidseperately under respective items (ii) Ladders scaffolding,safety belts etc required for execation of works shall be arranged by contractor & cost of the same is deemed to be included in the unit rate quoted rates. (iii) Contractor shall be fully responsible for the safety aspects of the people enagaged by him & any issues(if any) arising during the work shall be dealt by the contractor& the Dept shall be no way responsibile whatsever.

S&F in replacement of of 1.5 sqmm 3 core PVC insulated flexible copper conductor wire from street light to terminal box drawn through MS pipe/PVC conduit or as indicated in other locations complete all as specified and as directed.

M& L for preparation of old painted surfaaces of street light steel tubular poles above GL/Copping including cross section channels,flat iron clamps by srapping with wire brush applying one coats of aluminium paint including pole numbering using three layer of radium strip of min 4-5 inch wide(Yellow,Green,Blue) on each pole using printer letter all as specified and directed. Note-:(i) Ladders scaffolding,safety belts etc required for execation of works shall be arranged by contractor & cost of the same is deemed to be included in the unit rate quoted rates. (ii) Contractor shall be fully responsible for the safety aspects of the people enagaged by him & any issues(if any) arising during the work shall be dealt by the contractor& the Dept shall be no way responsibile whatever.