Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹8.9 L+₹64,285 (7.75%)Rejected-AOC CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | L2 | Rejected-AOC L2 | |
| 3 | L3₹8.9 L+₹64,769 (7.81%)Rejected-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L3 | Rejected-AOC L3 | |
| 4 | L4₹8.9 L+₹64,769 (7.81%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
Refer Docs
EMD Value
₹19,980
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I TALBEHAT
LAKEVIEW CAMP MIL STN TALBEHAT 284125
REPAIR/MAINT TO JOINERY WORKS IN ZONE 12 AND 11 AT MI STN TALBEHAT
2022_MES_570245_2
AGE(I)/TBT/TOK-62/2022-23
Open Tender
Civil Works
Item Rate
180 days
AGE I TALBEHAT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
AGE I TALBEHAT
₹19,980
Yes
28 Feb 2023
6 Jan 2023
30 Jan 2023
7 Jan 2023
28 Jan 2023
14 Jan 2023
Amount
Taking down chowkats or frames exc. 1.5 but n.exc 4sqm each with shutters (W/o taking off shutters from the frame) and removal to store complete all as specified and as directed
-Ditto- but n.exc 1.5m2 each -ditto-.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat molded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.
S&F IInd class hard wood (solid) plain. Solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered but together with glue, pinned at joints complete all as specified and as directed
S & F pressed steel frame size 105x60mm for door with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed
S & F pressed steel frame size 165x60mm for door with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed
S&F M.S work as in holdfasts., wind ties , plane angle cleats for securing purlins to wooden trusses or rafters etc. complete all as specified and as directed
M & L cement concrete type B-0 1:2:4 (12.5 mm graded agg ) as in bed block ,Filling of holes, coping & filling to PS Frame etc. complete all as specified and as directed
S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed
S&F II nd class HW, 35 mm thick Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed
S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkats of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Factory Made wood free EPF Solid PVC Molded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Molded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification. (Note : Design of shutter approved by Engr-in-charge)
S&F powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and as directed by Engr-in-charge
S&F Powder coated anodized aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminium snap beading screws etc. complete all as specified.
S&F Powder coated anodized aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc. complete all as specified
S&F powder coated aluminium anodized side hung type window/ventilators shutter without sash bars section weight not less than 0.55Kg/RM with extruded built up standard tubular and other sections of approved make according to IS(thickness of powder coating not less than 50micron including necessary glazing clips weight not less than 0.124Kg/Rm for fixing sheet glass anodized aluminium fittings/fixtures such as required number of roller of suitable size interlocking cleats/ plates etc. as required for complete fixing window shutters complete all as specified and as directed by Engr-in-charge. Note:- Only aluminium shutters for the window shall be measured in sqm sheet glass and wiremesh etc. shall be measured and paid in respective items
M&L powder coated aluminium window shutter sliding type section not less than 0.55 Kg/RM, three shutter two glazed and one gauged including joining cleat, glazing cleap,rubber packing aluminium snap beading,screws,locking arrangement complete all as specified and as directed by Engr-in-charge.(Measurement shall be done leaf basis) Note:- Glass and Wiremesh paid Separately.
S&F anodized aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge
M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed baluster, railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
M & L for rolled mild steel work angle iron as in door frame (Chowkats) & cooler stand frame confirming to Fe-290 or Fe-165 including preparing back of chowkats and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.
Providing and fixing factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note:-Each member of window to be measured separately with clear length. Three track sliding frame (88mm x 52mm)
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanized steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm each
S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium frames n. exc 0.5 sqm in each pane all as specified and as directed.
S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium frames exc 0.5 sqm in each pane all as specified and as directed.
M&L for preparing the new wooden surface & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer over 10Cm width or girth complete all as spd & directed.
M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed.
Taking out old unserviceable steel wire cloth & S & F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and directed
Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed complete all as spd & directed.
S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden window fixed with wooden bead and pin tacked complete all as specified and directed.
S & F figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden bead and pin tacked complete all as specified and directed.
S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodized, with hard drawn steel spring fixed to door.
S&F in mild steel helical door spring 150mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge.
S&F aluminum alloy anodized butt hinges, ISI marked of size 100 mm, complete all as specified and directed.
S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed
S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed
S & F in repairs aluminium handle fabricated type, anodized 150mm size conforming to IS complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.
S & F in repairs aluminium, anodized, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.
S & F 250mm long aluminium alloy, anodized, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
Repair to Aluminum window / door including necessary welding, riveting, easing drilling taking down replacement of unserviceable hanging devices making them in serviceable condition and refixing in same opening complete all as specified and directed.
Repair to wooden window, Door including necessary riveting, easing drilling and replacement of unserviceable hanging device, and making them in serviceable condition complete all as specified and directed.
Repair to steel window including necessary welding, riveting, easing drilling and replacement of unserviceable hanging device, and making them in serviceable condition complete all as specified and directed.
M&L for preparation of old painted steel surface of any description and applying one coat of synthetic enameled paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wooden surface of any description and applying one coat of synthetic enameled complete all as specified and as directed.
M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.
Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed
M&L for preparation of surface 1mm thick wall care putty complete all as specified and directed.
M&L for preparing of surfaces of walls, pilasters, cornices etc. by washing, rubbing down & stopping etc. and applying one coat of oil bound distemper in any colour complete all as specified and directed.
Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed
S&F in repair Stainless steel 20mm dia curtain rod including fixing brackets complete all as specified and directed.
S&F Stainless steel knobs with bracket fixing at end of pelmet rod complete al as spd & directed.
S&F 0.9m to 1.5m bottom door seal brown aluminium frame 38 to 45mm width all as specified and directed.
Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)
HARNAM SINGH ANIL SINGH
M/S A.R BUILDERS
M/S SANTOSH KUMAR JAIN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .