Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.0 L+₹82,121.80 (2.82%)Rejected-AOC 15 MOULYA NMH LAYOUT 1ST STAGE CHIKKA BANAVARA POST BENGALURU 560 090 | BENGALURU URBAN | KARNATAKA | 560090 | L2 | Rejected-AOC L2 | |
| 3 | L3₹30.0 L+₹83,959 (2.88%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹30.3 L+₹1.1 L (3.82%)Rejected-AOC NO 6 NJ BUILDING GANGAMMA TEMPLE ROAD JALAHALLI POST BANGALORE 560 013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | L4 | Rejected-AOC L4 | |
| 5 | L5₹31.2 L+₹2.0 L (6.81%)Rejected-AOC | L5 | Rejected-AOC L5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Yelahanka
GE (AF) Yelahanka Bangalore - 63
REPAIRS TO CERTAIN HARDSTANDING, APRONS, APPROACHES OF BUILDING, I-GATES IN TECH AREA AND COMPREHENSIVE MAINTENANCE TO SMALL ARMS AND BAFFLE RANGE AT AFS YELAHANKA
2022_MES_533681_1
8981/E8
Open Tender
Civil Works
Item Rate
180 days
AFS Yelahanka
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Yelahanka
₹60,000
Yes
28 Jan 2023
25 Jun 2022
28 Jul 2022
25 Jun 2022
26 Jul 2022
14 Jul 2022
60 days
Amount
Demolition of Cement concrete (Un reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level)
Demolition of Cement concrete (Un reinforced) of any description and in any position not otherwise specifically provided for
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stone work and prcast concrete articles complete all as specified and directed.
Taking down cement or cement lime plaster , on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water etc.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface in brocken stone or boulders
M&L for Cement Concrete 1:4:8,Type D2, using 40mm graded stone aggregate as in foundations, filling and mass concrete
M&L for 100mm thick cement Concrete 1:2:4 ,type B-2 , using 40mm graded stone aggreagte as in flooring/Hardstanding
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade "B"
Forming 20mm thick expansion joints filled with preformed bituminous filler top 30mm primed and sealed with sealing compound Grade "B". Thickness of slab 100mm thick
Sand filling under floors or in foundations including watering and consolidation
M&L for Machine pressed precast concrete interlocking paver block,PVC rubber moulded, lacquer finish any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey ement and no pigment.
All as per item ser No.12 above but except tiles
M&L for providing pre-cast cement concrete block masonry, Type C1, 1:3:6 (20mm graded aggregate) with solid blocks, exc 10 cm in width and setting in mortar complete set in cement mortar 1:6
All as per item No.14 above but except blocks or slabs set in cement mortar 1:6
M&L for Cement Concrete 1:3:6 , Type C2 using 40mm graded stone aggregate as in surface Channels and drains
Excavating in trenches, n exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil
Excavating over areas, n exc 1.5 deep and getting out in soft/loose soil
Removing excavated material /demolished material to a distance exc 1.50Km but n exc 5 Km and depositing where directed.
M&L for cement concrete 1:3:6 ,Type C1 using 20mm graded stone aggregate as in coping, Kerbs etc. complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
All as per item No.22 above but 45cm inner girth
M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finshed even and smooth without using extra cement but with WPC. NOTE:WPC shall be measured and paid seperately.
Supply onlyIntegral water proofing compound
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils
Surface dressingt n exc 15 cm deep in soft/loose soil
M&L for preparation of new or previously untreated surfaces of brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of Synthetic enamel paint including priming paints plaster coat complete all as specified and as directed.
M&L for preparation of old painted surfaces on plain or moulded surfaces of concrete, brick, stone, asbestos, cement plaster surfaces,or surfaces of any description over 10 cm girth or width not otherwise applying one coat of Synthetic enamel paint complete all as specified and as directed.
M&L for applying three coats of white wash on walls including peparing surfaces plastered or unplastered new surfaces.
M&L for applying two coats of white wash on walls including peparing surfaces plastered or unplastered old surfaces including complete removal of existing treatment.
M&L for preparation of plastered or unplastered New surfaces applying two coats of cement base paint over a coat of white wash including
M&L for applying one coat of Cement base paint on old wall surfaces including preparation of surfaces of plastered or unplastered surfaces.
M&L for 50 mm thick cement concrete 1:2:4, type B-2 using 40mm graded stone aggreagte as in flooring/Hardstanding.
M&L for Mild Steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, Gd.I, IS-423(part-I) Part-I.
M&L for Welding in repairs n.exc 2.5cm in length,thickness of Metal to be welded exc 6mm but n.exc 9mm.
M&L for Welding in repairs exc 2.5cm but n.exc 5cm in length,thickness of Metal to be welded exc 6mm but n.exc 9mm
Resecuring or easing, adjusting by applying suitable greasing, adjusting Hinges,removing denting of steel members of steel gates,(Side Hung or Sliding gate) necessary welding if required in the steel parts, making the steel gate leaf correct and true workable position, cleaning the track of guide channel of gate by removing all loose dirt/oily/greesy/sludges/muddy material from the grroove in the track and keeping the track free for movement/sliding . Making the gate with free and easy workable movements and true functional. Area of Gate/gate leaf/Sliding door gate exc. 2.00 Sqm and not exc. 6.00 Sqm
Resecuring or easing, adjusting by applying suitable greasing, adjusting Hinges,removing denting of steel members of steel gates,(Side Hung or Sliding gate) necessary welding if required in the steel parts, making the steel gate leaf correct and true workable position, cleaning the track of guide channel of gate by removing all loose dirt/oily/greesy/sludges/muddy material from the groove in the track and keeping the track free for movement/sliding . Making the gate with free and easy workable movements and true functional. Area of Gate/gale leaf/Sliding door gate exc 6.00 Sqm and not exc 12.00 Sqm
Resecuring or easing, adjusting by applying suitable greasing, adjusting Hinges,removing denting of steel members of steel gates,(Side Hung or Sliding gate) necessary welding if required in the steel parts, making the steel gate leaf correct and true workable position, cleaning the track of guide channel of gate by removing all loose dirt/oily/greesy/sludges/muddy material from the groove in the track and keeping the track free for movement/sliding . Making the gate with free and easy workable movements and true functional. Area of Gate/gale leaf/Sliding door gate exc 12.00 Sqm and not exc 24.00 Sqm
Resecuring or easing, adjusting by applying suitable greasing, adjusting Hinges,removing denting of steel members of steel gates,(Side Hung or Sliding gate) necessary welding if required in the steel parts, making the steel gate leaf correct and true workable position, cleaning the track of guide channel of gate by removing all loose dirt/oily/greesy/sludges/muddy material from the groove in the track and keeping the track free for movement/sliding.Making the gate with free and easy workable movements and true functional. Area of Gate/gale leaf/Slinding door gate exc 24.00 Sqm and not exc 36.00 Sqm
Resecuring or easing, adjusting by applying suitable greasing, adjusting Hinges,removing denting of steel members of steel gates,(Side Hung or Sliding gate) necessary welding if required in the steel parts, making the steel gate leaf correct and true workable position, cleaning the the track of guide channel of gate by removing all loose dirt/oily/greesy/sludges/muddy material from the grroove inthe track and keeping the track free for movement/sliding.Making the gate with free and easy workable movements and true functional. Area of Gate/gale leaf/Sliding door gate exc 36.00 Sqm and not exc 48.00 Sqm
Supply new control unit for Automatic sliding gates installed at Air Field
Supply new remote control set consisting of one receiver and one transmitter for Automatic sliding Gates at Airfield
Dismantling boarding,any description, fixed in any position with nails
S&F 2nd class Soft wood 25mm thick clean sawn Boarding with butt joints fixed with nails in any situation (except flooring and skirting)
S&F boarding in repairs of 25mm thick 2nd class soft wood to replace old and/or decayed boarding in patches including cutting out old, piecing, heading joints etc
M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth not otherwise described and treated with creosote oil complete all as specified and as directed.
Removal of earth laid over Stop Butt surface and stacking on ground nearby
Supply only Saw Dust near Stop Butt
Mixing of saw dust with available earth equally by means of mechanically or manually and laying over the slant surface of entire stop butt
M&L for Providing cement concrete in Type C1, 1:3:6 (20mm graded aggreagate) as in coping
Excavating in trenches n.exc 1.5m wide and not exc 1.5m in depth; for foundation, etc or for shafts, well cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.
M&L for PCC 1:2:4 , type Bo using 12.5mm graded stone aggregate as in flooring to receive top layer.
M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes
M&L for Non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair to receive top layer
M&L for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces finshed even and smooth without using extra cement
M&L for rendering 20mm thick cement plaster in CM 1:4 on stone masonry surfaces or surfaces other than fair face of brick work or on one side of lathing
M&L for Raking out joints to random rubble or polygonal masonry rubble or polygonal rubble uncoursed or brough upto courses/brick wall surfaces in cement or cement lime mortar
M&L for applying one coat of white wash on walls including preparation of old plastered or unplastered surfaces.
M&L for applying one coat of oil bound distemper on wall surface including preparation of old plastered or unplatsered surfaces complete all as specified and as directed.
M&L for applying one coat of exterior emulsion on wall surface including preparation of old plastered or unplastered surfaces complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint on wooden surfaces including preparation of new or previously untreated surfaces of any description, not otherwise described over 10 cm width or girth
M&L for applying one coat of synthetic enamel paint on steel surfaces including preparation of new or previously untreated surfaces of any description over 10 cm in width or girth, not otherwise described
M&L for applying painting 2 to 3mm thick road marking strips n exc 15 cm width or girth for layout of center line, dashes, rows, speed brakers. Writing letter etc, thermoplastic road marking paint (reflective) of specified shade or colour by using full automatic thermoplastic paint applicator machine filled with profile shoe, glass beads spacer propone tank heater and profile shoe heater over by experienced operator on road surface including road marking paint spray machine as in lines, dashes letters, arrows etc complete all as specified and directed.
S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured)
Welding in repairs n exc 2.4cm.Thickness of Metal to be welded n. exc 6mm
S&F in repairs of 8mm dia rod length exc 10 cm but not exc 20 cm inserting in RCC fencing post by means of drilling and inserting the rod with Fosroc/Hilti chemicals such as lock fix for holding barbed wire fencing
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
All as per item No.69 above but from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones
S&F 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane.
Demolition of Cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition)
M&L for providing pre cast cement concrete in cover slabs (for manholes, or over open drain ., etc or any other position location , chullah hoods, chajjas, water troughs mangers, shelves and similar articles , Type B1, 1:2:4(20mm graded aggregate) set in cement mortar 1:4
S&F TMT bars 10mm dia over cut to length , bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Taking down or up 25mm steel tubing and connections, including cleaning for refixing or removal to store
Taking down or up 20mm steel tubing and connections, including cleaning for refixing or removal to store
Taking down or up 15mm steel tubing and connections, including cleaning for refixing or removal to store
S&F GI tubing 25mm dia "Med" grade with all fittings and fixed to walls and ceilings or laid in floors
S&F GI tubing 20mm dia "Med" grade with all fittings and fixed to walls and ceilings or laid in floors
S&F GI tubing 15mm dia "Med" grade with all fittings and fixed to walls and ceilings or laid in floors
Fixing only GI tubing any grade to walls and ceilings or laying in floors. Bore of pipe 25mm
Fixing only GI tubing any grade to walls and ceilings or laying in floors. Bore of pipe 20mm
Fixing only GI tubing any grade to walls and ceilings or laying in floors. Bore of pipe 15mm
S&F in repairs Bib taps fancy type alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. Bore of pipe 15mm
S&F in repairs stop valves, fancy type chromium plated, cast copper alloy screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. Bore pipe 15mm
S&F in repairs Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and flu-nuts screwed for iron pipe and fixed. Bore of pipe 15mm
S&F in repairs Chromium plated statinless steel Grating 75mm/80dia
S&F PVC connections 15mm size with PTMT 600mm long
S&F in repairs of Health faucet (ABS Boady) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metere long flexible tube and ABS wall hook including making connections and fixed in positions complete in all respect as specified.
S&F in repairs Vitreous China wash down water closet pan (Pedestal Pattern) white (excluding fixing bolts, flushing cistern and flush pipe)
S&F in repairs 10.00 litres Capacity PVC valveless, syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets.
S&F PVC Waste down pipe 32mm/40mm for wash basin, Urinal upto 1.20 mtr long
S&F in repairs of Vitreaous China bowl Urinal flat back, size 465 x 335 x 265 mm white (minimum), with grating and unions for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing ciostern traap and waste pipe)
S&F in repairs of Aluminium anodized barrel tower bolt of extruded secrtion and fixed. Length of bolt 200mm
S&F in repairs of 250 long aluminium alloy, anodized, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed
S&F in repairs Butt hinges Medium weight cold rolled mild steel and fixed. Size 100mm
S&F in repairs Alumium alloy handles, fabricated type anodized. Size 125mm
Moulya Builders
shree bhavani constructions
ANAND REFRIGERATION
SRUSHTI CONSTRUCTIONS
Vinayaka Enterprises
MATA GUJRI CONSTRUCTION CO.
eurekaenterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .