TRD work in c/w Sectioning improvement in BAHL-BRML section & SVDK Station over Jammu division.

Preparation of drawing as per RDSO design for Over Head Equipment

Supply of Concrete for foundation and plinth in other than hard & rocky soil

Erection of Concrete for foundation and plinth in other than hard & rocky soil

Erection of Concrete for foundation and plinth in hard & rocky soil

Supply of galvanized steel fabricated masts / other supporting structure

Erection of galvanized steel fabricated masts / other supporting structure

Supply of fabricated and galvanized steel work (SPS) other than mast with necessary components

Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components

Supply of Single bracket assembly (without insulator)

Erection of Single bracket assembly

Supply of Stay Arm composite insulator CD 1600 mm as per RDSO Spec. No. TI/SPC/OHE/INSCOM/1072 or latest.

Supply of Bracket Composite Insulators CD 1600 mm as per RDSO. Spec. No. TI/SPC/OHE/INSCOM/1071(Rev-01) or latest.

Erection of insulators for single bracket assembly

Supply of copper jumper wire

Erection of copper jumper wire

Supply of Composite 9T Insulators (CD 1600mm) as per RDSO Specification TI/SPC/OHE/INSCOM/1070 (Rev-1) or latest.

Erection of 9-Tonne insulator

Supply of regulating equipment 3 pulley type ATD with counter weight

Supply of Section Insulator assembly including bar insulator assembly for conventional OHE

Erection of Section Insulator assembly including bar insulator for conventional OHE

Supply (without insulator) of 25KV Single Pole(SP) Isolator without earth contact assembly

Erection of 25KV Single Pole(SP) Isolator without earth contact assembly

Supply of 25KV post / pedestal insulators for isolators

Erection of 25KV post / pedestal insulators for isolators

Supply of an Earth contact assembly in an isolator

Supply of copper bus bar 18mm

Erection of copper bus bar 18mm

Supply of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest

Erection of single earth electrode with earth pit complete as per RDSO Drg No. ETI / OHE / P / 7020 or latest

Manufacturing supply of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement.

Erection / Fixing of Retro Reflective type structure Number plate as per RDSO drg. No.ETI / OHE / P / 7503 or latest along with all fixing arrangement.

Supply of Structure Bonds

Erection of Structure Bonds

Supply of Transverse (cross rail, inter-track, Z & special type) bonds

Erection of Transverse (cross rail, inter-track, Z & special type) bonds

Supply of earth bus

Erection of earth bus

Supply and erection of standard Galvanized wire bond in place of M S Flat bond at designated locations in theft prone areas

Fabrication and supply of Structure Bond of MS Flat size 40X6mm duly painted alongwith fasteners for both leg of Portals (as per RDSO report No. TI/REPORT /PSI/2015/ 00104)

Erection of bonds on platform area including drilling of holes in structure and rail including cutting of platform surface100mm x 500mm placing of bond and making good surface with PCC and providing cleats as per latest RDSO drawing

Supply and fixing of cleat 02 Nos. for each structure Bond on platform wall with screw

Platform cutting and covering with concrete according to Bond size

Supply of M S Flat 50 x 6mm duly painted alongwith fasteners

Erection of M S Flat 50 x 6mm

Supply of Contact wire Ending Clamp

Supply of Catenary wire Ending Clamp

Supply of Anti-Creep with component

Erection of Anticreep with component

Dismantling of Bracket Assembly

Reclaimation of OHE mast

Dismantling of fabricated steel other than mast

Dismantling of copper jumper

Dismentling of Anticreep

Transfer of equipment from one support to another

Supply of Large Copper Jumper wire 160 Sqmm

Erection of Large Copper Jumper wire 160 Sqmm

Supply of Large Span Wire (130 Sq mm)

Supply of Large Span Ending (130 Sq mm)

Supply of 150sq mm hard drawn copper cross feeder with component Square

Fabrication, developing and supply of fabricated Sectioning Diagram, Schematic and TSWR diagram Boards with computerized digital printing on adhesive Venyle of adequate size as per requirement

Re-painting on existing OHE structures with water proof yellow enameled paint as per explanatory notes(Rate included material & erection)

Re-writing on existing OHE structures as per explanatory notes(Rate included material & erection).

Supply of various types 25KV caution Board / Plates as per explanatory Notes

Supply of various types of 25KV Danger Boards / plates as per explanatory notes

Design, manufacturing, supply of Retro Reflective type Sigma Board with non- 65 reflective black ground as per RDSO drg. No. TI/Drg/OHE/PLTBRD/RDSO/ 00036/12/0 (Size 450 mm x 600 mm) and RDSO specification No. ETI/OHE/33A (12/97) Rev. 8 or latest including transportation and all taxes etc.

Interlocking system for isolator make interprosing consisting: a) Bolt lock type L insertion A-01; b) Lock with key exchange box with key incription B & A

Labour charges for fitting of interlocking system

Supply of Anti-Bird Disc as per drawing No. TI/DRG/OHE/Anti- Bird/00001/00/01 (Sh-1 & Sh- 2) or latest

"Erection of Anti-Bird Disc as per drawing No.TI/DRG/OHE/Anti- Bird/00001/00/01 (Sh- 1 & Sh- 2) or latest "

Vertical cutting of 90R or 52KG / 90 OUTS (if any type of rail) as per explanatory notes

Supply of 250m DJ Board

Erection of 250m DJ Board

Supply of 500m DJ Board

Erection of 500m DJ Board

Supply of DJ open Board

Erection of DJ open Board

Supply of DJ close Board

Erection of DJ close Board

Handling, Leading, loading and Transportation charges for Railway supply material from different Railway sites and released material from different Railway sites, if any to concerned TRD Depot

Supply 25KV single pole vacuum type Circuit Breaker (CB) 1600 Amp

Supply of 42KV Lightining Arrester (LA) with surge monitor and Disconnector assembly

Supply of Disconnector Assembly suitable for 42 KV lightning arrestor as per RDSO Spec. No.TI/SPC/PSI /MOGTLA /0101(08/2014) or latest

Supply of 25KV Potential Transformer type-II

Supply of solid copper bus bar connector 18 mm bus terminal Multiple Bolt 6311-1 or latest Spec TI/SPC/OHE/Fittings/0130-10/13-Rev-1 or latest, Drw. ETI/OHE/P/6310-1 Rev B or latest, STR. CORE-STR-16 Rev-1 or latest

Erection of aluminium bus bar connectors Bus terminal (6310)

Supply of aluminium bus bar connectors Bus splice (6490)

Supply of aluminium bus bar connectors:- Terminal connector 36/20 (6530)

Supply of aluminium bus bar connectors- Flexible Bus splice (6550)

Supply of Bus T connector (6500)

Supply of Tap connector (6520)

Supply of Al. busbar connectors terminal connector Bolted Type (6830-I).

Supply and fabrication of MS Split type Arcing Horns of size 14mm dia made of MS Galvanized Rod

Brick work for foundation plinth and retaining wall

Supply for Plastering of brick / retaining wall with 1:4 cement and sand mortar

Erection for Plastering of brick / retaining wall with 1:4 cement and sand mortar

Supply of 110V, 40 AH, Low maintenance Lead Acid Batteries including wooden stand , elctrolyte and tool board

Erection of 110V, 40 AH, Low maintenance Lead Acid Batteries including wooden stand , elctrolyte and tool board

Supply of Battery Chargers for 110V, 40AH Low maintenance Lead Acid Batteries

Supply of bolted type connectors for 160 Sqmm copper jumper RI No. 1009

Erection of bolted type connectors for 160 Sqmm copper jumper RI No. 1009

Supply of Number Plate for Isolators with requisite clamps and nuts and bolts of required size

Erection of Number Plates for isolators with requisite clamps and nuts and bolts of required size

Supply and fixing of Cast iron / good quality plastic body Silica Gel breathers

Supply of Contact wire splice complete (toothed type) conf. RDSO Drg. No. ETI/OHE/P/ 1080-1 (Mod.B) or latest.

Supply of Catenary wire splice complete (65) conf. RDSO Drg. No. ETI/OHE/P/ 1090 or latest.

Re-usable spring inserted Self Locking Nut size: M-16 (Model No. SP-16, Pitch :2.0, Hn:13, BN:24, 0 CN:27.7, Ln:22.6, Sn:24.0), Material: STS, S45C, SCM, Plating Electro Zinc Plating, Melted Zinc, Nickle, Chrome, Zink powder coating. (Make: Saper lock or similar)

25 KV DO Fuse Barrel Assembly 53cm long as per RDSO Specifications No. ETI/PSI/14 (1/86) REV.1 (APR-87)

Supply of Contact Wire Parallel clamp (LARGE) RI No. 1031-2 with RDSO Drg .No. ETI/OHE/P/1030-2 REV-D or latest

Supply of Contact Wire Parallel Groove Clamp RI No. 1031-3 Complete with fasteners as per RDSO Drg. No. ETI/OHE/P/1030-3, Rev-A. RDSO Spec. No. TI/SPC/OHE/Fittings/0130 with A&C slip No. 1 or latest

Supply of Contact Wire Parallel Clamp (Small) RI No.-1041-2, RDSO Spec: TI/SPC/OHE/Fittings/0130 with A&C Slip No.1, Drg. No.: ETI/OHE/P/1040-2 Rev.E or latest

Supply of Parallel clamp (150/160) RI.No.1051-3 and as per RDSO Drg. No. ETI/OHE/P/1050-3 Rev-A or Latest RDSO Spec No. TI_SPC_OHE_Fittings _0130_with A&C Slip No.1 or latest

Gear less Hand operated pulling & lifting machine of 1.6 tonne RDSS spec. No. TI/SPS/OHE/TOOL/PL/0990 with A&C slip No.1

Gear less Hand operated pulling & lifting machine of 0.8 ton

Ratchet lever hoist pull lift of 1.6 tonne

Rail hole Machine as PER RDSO DRG. NO. TM/SM/03 DT. 19/11/1992 FIRST REVEISION 2020 or latest

DO Fuse operating rod

Digital Dynamoter (3500 kgf)

Hacksaw Blades, Spec. Size (Inches-22L X 1.5W X 0.80W / mm -550L X 40W X 2.00 Thick = 6 TPI

Torque Wrench 25-135NM

Insulation Bond Sleeve suitable for Bond strip size 40mm X 6mm as per latest RDSO spec. and Drg.

Rail Drill machine-light weight compact petrol driven rail drill machine with weight 123 16kg,drilling capacity with rail drill cutter 12-36mm with weldon shank solid drill upto 16mm stroke length of 50mm with depth of cut 35mm, spindle of the machine 19.05 weldon connection, drilling time in 60kg rail upto 110UTS is approx 1min, 4 stroke air cooled 35CC ENGINE with net torque 5500 RPM clamping system quick release type and stright centrally to both the axis.

Supply of Chop saw Metal Cutting machine Technical specification: Rated input Power-2200 W No Load speed- 3800 RPM Disc.Dia-355 mm For 14 inch Abrasive Wheel (Bond cutting machine )

Supply of RAISED REGISTER ARM CLAMP WITH PACKING SADDLE COMPLETE SET. AS 125 PER RDSO DRG NO. ETI/OHE/P/1370-1(Rev-J) OR LATEST & RDSO SPECIFICATIONS TI/SPC/OHE/FITTINGS/0130 (10/13) Rev. 1 OR LATEST & ETI/OHE/13(4/84) WITH A & C-1 to 4 OR Latest

PSI Discharge Rod assembly suitable for 25 KV / 33 Kv AC traction System with two Clamp suitable for 36 to 50 mm dia as per specification no ETI/OHE/51 (9/87) rev -1 (Oct-92) Drawing no. TR- D/ALD/3/2017

Tool Kit (spanners D & O type of various size) 10-11 to 33-34 No.

PARALLEL CLAMP (20/20) RI NO 1551, Complete with GI Fasteners and Bimetallic Strip as per RDSO DRG NO ETI/OHE/P/1550 REV.F and RDSO Specification No.TI/SPC/OHE/Fittings/0130(10/30),Rev.1.

Bimetallic strips (Aluminum & Copper) ,Thickness-2.0 mm, Size 300 mm x 150 mm, as per RDSO Spec No. TI/SPC/OHE/Strip (Al-Cu)/0901 dtd 20.01.2021 or Latest Accepted

Bimetallic Strip 80X80X2 mm With Holes As Per RDSO Drg. ETI/PSI/P/6480 Part No. 5 Or Latest Suitable To Use along With Aluminum 36mm Bus Terminal

02-(@ 100% Extra on Erection Rates for work done under Power Block)

Erection of galvanized steel fabricated masts / other supporting structure

Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components

Erection of Single bracket assembly

Erection of insulators for single bracket assembly

Erection of copper jumper wire

Erection of 9-Tonne insulator

Erection of Section Insulator assembly including bar insulator for conventional OHE

Erection of 25KV Single Pole(SP) Isolator without earth contact assembly

Erection of 25KV post / pedestal insulators for isolators

Erection of copper bus bar 18mm

Erection of Anticreep with component

Dismantling of Bracket Assembly

Reclaimation of OHE mast

Dismantling of fabricated steel other than mast

Dismantling of copper jumper

Dismentling of Anticreep

Transfer of equipment from one support to another

Erection of Large Copper Jumper wire 160 Sqmm

Erection of Anti-Bird Disc as per drawing No.TI/DRG/OHE/Anti- Bird/00001/00/01 (Sh-1 & Sh- 2) or latest

Erection of 250m DJ Board

Erection of 500m DJ Board

Erection of DJ open Board

Erection of DJ close Board

Erection of aluminium bus bar connectors Bus terminal (6310)

03-(@ 50% Extra for steel erection work done manually under Power

Erection of galvanized steel fabricated masts / other supporting structure

Erection of fabricated and galvanized steel work (SPS) other than mast with necessary components

04- GST @ 18% on all items under schedule 1, 2 & 3 as per extant rules.

GST @ 18% on all items under schedule 1, 2 & 3 as per extant rules.