Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC JAISALMER | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹31.1 L+₹13,969.50 (0.45%)Rejected-Finance NAYA BASS MAHAMANDIR JODHPUR RAJASTHAN 342006 | JODHPUR | JODHPUR | RAJASTHAN | 342006 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹33.8 L+₹2.8 L (9.00%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | M/s Shri Inder Construction Company L1 | star electricals L3 | Anil Builders L2 |
|---|---|---|---|---|---|---|
| 1.00 | Taking up unserviceable/ defective CI/DI/MS water mains (including all fitting ) with spigot/ socketed / flanged ends including disconnecting pipes and fittings in any position for 100mm dia complete all as specified and as directed by the Engineer-in-Charge. | 165 | RM | 20 ₹3,300 Lowest | 70 ₹11,550 | 20 ₹3,300 Lowest |
| 2.00 | All as per Item No. 1.00 here-in-before above but 150 mm Dia size | 275 | RM | 25 ₹6,875 Lowest | 100 ₹27,500 | 30 ₹8,250 |
| 3.00 | All as per Item No. 1.00 here-in-before above but 200 mm Dia size | 1,815 | RM | 25 ₹45,375 Lowest | 130 ₹2,35,950 | 30 ₹54,450 |
| 4.00 | S&F ductile iron pressure pipes, class K-7, centrifugally cast with spigot and socket ends as per following conforming to IS 8329/2000 with cement mortar lining inside the pipes with outside zinc coating suitable for push-on-joint (rubber gasket D jointing) for 100mm dia complete all as specified and as directed by the Engineer-in-Charge. | 110 | RM | 1,520 ₹1,67,200 | 1,600 ₹1,76,000 | 1,275 ₹1,40,250 Lowest |
| 5.00 | All as per Item No. 4.00 here-in-before above but 150 mm Dia size | 110 | RM | 1,980 ₹2,17,800 | 1,900 ₹2,09,000 | 1,750 ₹1,92,500 Lowest |
| 6.00 | S&F ductile iron pressure pipes, class K-9, centrifugally cast with spigot and socket ends as per following conforming to IS 8329/2000 with cement mortar lining inside the pipes with outside zinc coating suitable for push-on-joint (rubber gasket D jointing) for 150mm dia complete all as specified and as directed by the Engineer-in-Charge. | 110 | RM | 2,050 ₹2,25,500 Lowest | 2,300 ₹2,53,000 | 2,100 ₹2,31,000 |
| 7.00 | All as per Item No. 6.00 here-in-before above but 200 mm dia size | 715 | RM | 2,450 ₹17,51,750 Lowest | 2,550 ₹18,23,250 | 2,550 ₹18,23,250 |
| 8.00 | Refixing / relaying of old DI Pipe and connection in new or old position including fittings with old / new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in trenches and testing for leakages including required joint (i.e. Tyton Joint / rubber gasket etc) for 100mm dia size complete all as specified and as directed by the Engineer-in-Charge. Note :- Old DI Pipe obtained from serial item No. 1.00 | 55 | RM | 200 ₹11,000 | 100 ₹5,500 Lowest | 100 ₹5,500 Lowest |
| 9.00 | All as per Item No. 8.00 here-in-before above but 150mm dia Note :- Old DI Pipe obtained from serial item No. 2.00 | 55 | RM | 200 ₹11,000 | 175 ₹9,625 | 130 ₹7,150 Lowest |
| 10.00 | All as per Item No. 8.00 here-in-before above but 200mm dia Note :- Old DI Pipe obtained from serial item No. 3.00 | 1,100 | RM | 230 ₹2,53,000 | 225 ₹2,47,500 | 150 ₹1,65,000 Lowest |
Tender Value
₹29.1 L
EMD Value
₹58,500
Closing Date
29 Oct 2025, 6:00 pmClosed
CWE (A) Jaisalmer
HQ CWE ARMY JAISALMER 345001 RAJASTHAN
SPL REPAIR/REPLACEMENT TO OLD / DAMAGE DI PIPE LINES AND ALLIED WORKS FROM KHETOLAI TO LATHI UNDER AGE (I) POKARAN.
2025_MES_734386_1
84366/C/E8
Open Tender
Civil Works - Water Works
Item Rate
180 days
POKARAN
AS PER NIT
8 documents required · 8 mandatory
₹500
AGE (I) POKARAN
₹58,500
Yes
2 Dec 2025
9 Oct 2025
31 Oct 2025
9 Oct 2025
29 Oct 2025
24 Oct 2025
9 Oct 2025 - 15 Oct 2025
Amount
Taking up unserviceable/ defective CI/DI/MS water mains (including all fitting ) with spigot/ socketed / flanged ends including disconnecting pipes and fittings in any position for 100mm dia complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No. 1.00 here-in-before above but 150 mm Dia size
All as per Item No. 1.00 here-in-before above but 200 mm Dia size
S&F ductile iron pressure pipes, class K-7, centrifugally cast with spigot and socket ends as per following conforming to IS 8329/2000 with cement mortar lining inside the pipes with outside zinc coating suitable for push-on-joint (rubber gasket D jointing) for 100mm dia complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No. 4.00 here-in-before above but 150 mm Dia size
S&F ductile iron pressure pipes, class K-9, centrifugally cast with spigot and socket ends as per following conforming to IS 8329/2000 with cement mortar lining inside the pipes with outside zinc coating suitable for push-on-joint (rubber gasket D jointing) for 150mm dia complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No. 6.00 here-in-before above but 200 mm dia size
Refixing / relaying of old DI Pipe and connection in new or old position including fittings with old / new bends, elbows, socket, nipple, tapers, and reducers etc as per site requirement and laid in trenches and testing for leakages including required joint (i.e. Tyton Joint / rubber gasket etc) for 100mm dia size complete all as specified and as directed by the Engineer-in-Charge. Note :- Old DI Pipe obtained from serial item No. 1.00
All as per Item No. 8.00 here-in-before above but 150mm dia Note :- Old DI Pipe obtained from serial item No. 2.00
All as per Item No. 8.00 here-in-before above but 200mm dia Note :- Old DI Pipe obtained from serial item No. 3.00
Excavation in trenches not exceeding 1.5 m width and not exc 1.5 m in depth and getting out in hard/dense soil for removing/laying of pipe line complete all as specified and as directed by the Engineer-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and as directed by the Engineer-in-Charge.
Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge.
Cutting existing GI/CI pipe line for insertion of new tees, collars for branch connections for 100mm dia complete all as specified and as directed by the Engineer-in-Charge. Note : CI /DI specials, Joints and Earth work shall be measured and paid separately under relevant items of this schedule.
All as per Item No. 14.00 here-in-before above but 150 mm Dia
All as per Item No. 14.00 here-in-before above but 200 mm Dia
S&F in repairs cast iron or ductile iron mechanical coupling /D Joint / MJ Collar heavy duty including all jiointing material, ISI marked, split type with long collar, suitable rubber rings, bolts, nuts and washers etc suitable for MS/CI/DI/GI /PVC pipes for 100mm dia size complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No. 17.00 here-in-before above but 150 mm Dia
All as per Item No. 17.00 here-in-before above but 200 mm Dia
S&F in replacement of Cast Iron sluice valves flanged ends stem of SS (AISI410) & Bronze (Gun Metal) working parts IS : 14846 both ends flanged with clamps and check nuts, operating wheel etc, non rising type K504, class PN 1.6 including jointing materials connecting and testing for 100mm dia size complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No. 20.00 here-in-before above but 150 mm Dia
All as per Item No. 20.00 here-in-before above but 200 mm Dia
Cutting the existing road straight by manual, depth and width not less than 30 cm for pipes up to 100 mm dia and 60 cm for pipes from 150 mm to 150 mm dia and 75 cm for pipes above 250 mm dia and filling back same material of road by using cold bitumen ccomplete all as specified and as directed by the Engineer-in-Charge.
S&F CI specials such as bends (any type, radius or angle) tapers any type (Straight, bend, increase, decrease or double socket etc) tee pieces, single 'Y' branch, double branch cross (all sockets, socket and spigots, collars, cap plugs etc up to 150 mm bore complete all as specified and as directed by the Engineer-in-Charge.
All as per Item No. 24.00 here-in-before above but for 200 mm bore to 300 mm bore.
Anil Builders (BID ID -3469375)
star electricals (BID ID -3467040)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
TENDER_84366.pdf
Tender Documents • 3.50 MB
BOQ_822320.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .