PETTY REPAIRS TO CERTAIN MD / OTM ACCN OF PINTO PARK AND CAMP AREA UNDER AGE B/R-II AT AF STN PALAM UNDER GE AF PALAM, DELHI CANTT-10

Amount

Attending day to day Receiving/ recording complaints lodged by the occupants for Buildings as Joinery, plastering, flooring, water supply and sewage works etc for OTM/MD Accn at Complaint Cell of Pinto park & Camp area. Rectification of defects by taking down /dismantling/demolition of existing items complete all as specified and as directed at site by Engineer-in-Charge/JE. Every complaint shall be completed after the entire satisfaction of user and JE. Notes:- (i) Contractor shall deploy 01 Nos Supervisor/Telephone attendant with two wheeler vehicle who shall attend and monitoing the complaint at site till completion. Supervisor shall provide assistance on every working day to JE for maintaining records duly signed and record feedback of every complaint. Supervisor should have proper knowledge of operating computer. (ii) Supervisor's salary and conveyance and any other expenditure shall be deemed to be included in the unit rate of complaint rate. ( iii) Cost of material and labour for providing new items including replacement /Demolition/ dismantling/taking down of old unserviceable items shall be measured and paid separately under relevant items of BOQ.

S&F in repair fancy type CP long body bib tap cast copper alloy with crutch or butterfly handle 15mm bore screwed down screwed for iron pipe complete all as specified and as directed.

S&F in repair bib tap, cast copper alloy with crutch or butterfly handle 15mm bore screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair bib tap15 mm size standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F in repair bib tap 20 mm size standard of PTMT any colour screwed for iron pipe (Minimum weight 20mm-125 gms) Make : PRAYAG

S&F in repair push tap15 mm size any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms) complete all as specified and as directed.

S&F in repair 15 mm stop valve of PTMT any colour high ressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-90gms)

S&F in repair 15 mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-90gms)

S&F in repair 15 mm pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-110gms)

S&F in repair 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-142gms)

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 20mm - 210 gms)

S&F in repair 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 25mm-455gms)

S&F in repair grating doom 100mm dia of PTMT complete all as specified and as directed.

S&F in repair swivel shower of PTMT any colour for fixing with 15mm pipe complete all as specified and as directed.

S&F in repair towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. (Minimum weight 170gms)

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. (Minimum weight 190gms)

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints complete all as specified and as directed.

S&F in repair PVC (SWR)110 mm bends any radius complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) three layered white, hoisted and fixed in position of capacity 500 litres all as specified in SSR Part-I.

S&F in repair rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) three layered white, hoisted and fixed in position of capacity 1000 litres all as specified in SSR Part-I.

S&F in repair 20 mm size push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore pillar taps, fancy type cast copper alloy with capstan head chromium plated screwed down high pressure and fixed complete all as specified and as directed.

S&F in repair 15mm bore CP brass angle stop valve/cock fancy type with long shanks and cup (concealed type) fixed complete all as specified and as directed.

S&F in repair 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, and screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F in repair 15 mm bore CP brass stop cock fancy type, chromium plated with iron shank and cup (Concealed type) fixed complete all as specified and as directed.

S&F in repair waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed 32mm bore complete all as specified and as directed.

S&F in repair waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 40mm bore complete all as specified and as directed.

S&F in repair waste coupling brass, chromium plated suitable for steel sink including strainer etc complete fixed complete all as specified and as directed.

S&F in repair 32mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, complete all as specified and as directed.

S&F in repair 40mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, complete all as specified and as directed.

S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet, ball valve, float and handle including brackets, 15 mm dia PVC connection and 450 mm long complete all as specified and as directed.

S&F vitreous china wash hand basin of size 550mm x 400mm white with 32mm CP waste coupling & PVC waste pipe including provn of bracket and 15mm dia CP Pillar tap complete all as specified and as directed.

S&F in repair vitreous china squatting pan “Orrisa” pattern of size 580mm x 440mm “White” with integral foot rest & CI 100mm “P” trap (excluding flushing cistern and flush pipe), connection to trap and to flushing pipe antI- syphonage pipe etc complete making good to floor including provn of glazed tiles complete all as specified and as directed by Engineer-in-charge.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair vitreous china wash down closet pan (Pedestal pattern) white with ‘S’ or P trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge.

S&F internal fitting of low level cistern and refixing after repairing of parts of internal fitting like PVC washer, float valve, syphon etc complete all as specified and as directed.

S&F Plastic water closet seat cover, white closed pattern with flat bottom and cover and brass chromium plated hinging device complete all as specified and as directed.

S&F in repair 125 mm dia fancy type shower rose with arm swivel type fixed to 15mm dia pipe fixed complete all as specified and as directed.

S&F in repairs 15mm bore galvanized steel water tubing medium grade with all GI fittings (as union, tee, socket, nipple, elbow) including taking out old unserviceable pipes by cutting, screwing and altering the old pipe lines if any required at site including cutting chases, fixed in walls, ceiling and laid in floors complete all as specified and directed. Note:- Change of short length pipe may shall be ordered under this item.

Description all as per ser item No 43 above but 20mm bore GI pipe complete all as specified and as directed.

Description all as per ser item No 43 above but 25mm bore GI pipe complete all as specified and as directed.

Description all as per ser item No 43 above but 50mm bore GI pipe complete all as specified and as directed. Note for Ser item No. 43 to 46:- Change of short length pipe may shall be ordered under this item.

Taking out old existing 15 mm bore GI pipe and refixing with new fittings after repairing & cleaning etc complete all as specified and as directed.

Description all as per ser item No 47 above but 20mm bore GI pipe complete all as specified and as directed.

Description all as per ser item No 47 above but 25mm bore GI pipe complete all as specified and as directed.

Repairing of existing 20mm bore float valve by replacing its rod of brass float of any description complete all as specified and as directed.

Description all as per ser item No 50 above but 15mm bore float valve complete all as specified and as directed.

Repairing of existing bib cock by replacing its jumper/washer etc to make it functional complete all as specified and as directed.

Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixer, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and JE complete all as specified and as directed.

S&F in repair CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and as directed at site.

S&F in repair PVC shoes white any radius 110mm bore complete all as specified and as directed.

S&F in repair flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern fixed complete all as specified and as directed.

S&F in repair 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface as per existing complete all as specified and as directed.

Description all as per ser item No 57 above but 75mm bore CI pipe complete all as specified and as directed.

S&F in repair 100 mm bore cast iron (sand cast) soil, waste and vent pipe in any length with or without ears with cement joint fixed to walls/floor including necessary MS clamp complete all as specified and as directed.

Description all as per ser item No 58 above but 75mm bore CI pipe waste pipe complete all as specified and as directed.

S&F in repair aluminium anodised frame work as in partition wall /Doors/windows/ ventilators/ sliding shutters by using suitable section conforming to IS-733 and IS-1285 and coating grade A-153 conforming to IS-1868 & fixed with rawl plug and screws or with fixing clips with expansion hold fastners including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap grid beading etc gap of junction at top and bottom and sides filled with PVC Neoprene felt including necessary provision of aluminium grills to windows/ventilators etc all as specified & directed by Engineer-in-Charge.

S&F in repair 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed in wooden/aluminium frame work complete all as specified and as directed.

S&F in repair 125mm long safety type aluminium anodized hasp and staples complete all as specified and as directed.

S&F in repair brass mortice lock vertical type size 100mm & 4 lever including escutchon plate and two no of keys fixed complete all as specified and as directed.

S&F in repair aluminum anodized barrel tower bolt extruded section 200mm long complete all as specified and as directed.

S&F in repair 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminum alloy & fixed complete all as specified and as directed.

S&F in repair aluminum anodized handles cast type of 150mm long complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed complete all as specified and as directed.

S&F in repair aluminium grill complete all as specified and as directed. Make:- DECO Cat No DG-104 or Jindal section

S&F in repair aluminium butt hinges 100mm long medium weight ISI marked complete all as specified and as directed.

S&F in repair aluminium body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg & fixed complete all as specified and as directed.

S&F in repair 35 mm thick factory made plain framed, paneled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & stile as per IS : 1003 (Part-I), Kiln, seasoned and chemically pressure treated of IInd class hard wood including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F in repair 30mm thick factory made flush shutter solid core constructions, block board core with any plywood face panels, commercial type on both faces all as specified Including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F in repair 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) for doors of second class hard word complete all as specified including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F in repair 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces complete all as specified and as directed.

S&F in repair 18/19mm thick block board Grade I quality exterior grade, decorative type with decorative face veneers on one face complete all as specified and as directed.

S&F in repair 9mm thick plywood grade BWR type BB No of ply 5 complete all as specified and as directed.

S&F in repair 6mm thick plywood grade BWR type BB No of ply 5 complete all as specified and as directed.

S&F in repair second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sq cm and not exc 25 Sq cm including two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F in repair 2nd class hardwood Timber in clean sawn scantlings complete all as specified and as directed.

S&F in repair glass dividing strips 3 mm thick and 38 mm width and inserted as per design complete all as specified and as directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane complete all as specified and as directed.

S&F in repair 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane complete all as specified and as directed.

S&F in repair wooden beading of teak wood, bull nosed ,chamfered or rounded fixed with screw to pre laminated board area exc 3 Sqcm and n.exc 6 Sqcm in section complete all as specified and as directed.

S&F in repair 50mm long butt hinges, medium weight cold rolled mild steel fixed with screws or welding fixed in repair including taking down shutter and refixing in same position complete all as specified and as directed.

Description all as per ser item No 85.00 above but 75mm long butt hinge complete all as specified and as directed.

Description all as per ser item No 85.00 above but 100mm long butt hinge complete all as specified and as directed.

S&F in repair 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Description all as per ser item No 89.00 above but 250mm long sliding door bolt complete all as specified and as directed.

Description all as per ser item No 89.00 above but 150mm long sliding door bolt complete all as specified and as directed.

Description all as per ser item No 89.00 above but 200mm long sliding door bolt complete all as specified and as directed.

S&F in repair 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S&F in repair continuous (Piano) hinges, mild steel, bright finish of electro galvanized width of flap 30mm fixed complete all as specified and as directed.

S&F in repair 150mm long mild steel helical door springs including roller plate complete all as specified and as directed.

S&F in repair aluminium sheet 0.50mm thick with cadmium plated screws complete all as specified and as directed.

S&F in repair floor door stopper 140mm size of aluminium alloy body and tongue anodized with double rubber over complete all as specified and as directed.

S&F in repair galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with wooden/MS beads fixed complete all as specified and as directed.

S&F in repair factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bar, dovetailed or welded including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

S&F in repair factory made steel ventilator top hung shutters including, steel handles, peg stay and box type hinges complete including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

S&F in repair mild steel works (Misc) as in bands, straps, clamps, hold fast clamps to CI Pipe to fix to the walls conforming to Fe –410 –0 or Fe –310 –0 including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F in repair mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed the both ends, each screwed end to be fitted with washer and one hexagonal or square complete all as specified and as directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed.

S&F in repair mild steel channel, angle, tee section fixed independently, without connecting plate etc (cut to required length) Gde Fe 410-W (E-250 quality A including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

Material only for flat iron fillets for securing incl all necessary drilling , bolting or riveting etc similar work conforming to E-165 (Fe-290) incl necessary bolts, drilling holes in angle incl 12mm dia bolt 100mm long incl 3 mm thick 02 Nos washers and one nuts and head including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

S&F in repair mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed by Engineer-in-charge including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

S&F in repair pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

S&F in repair 6mm thick asbestos cement corrugated or semi corrugated sheets fixed with L-type or J-type hooks in roofs, walls etc ccomplete all as specified and as directed.

S&F in repair 2mm thick fibre glass reinforced translucent plain sheeting with 100mm side lap fixed with ‘J’ or ‘L’ hook and washers or coach screws as in roof, walls complete all as specified and as directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repair 0.63mm thick plain galvanised mild steel sheeting as in ridge, hips, valley gutter, drip and straight flashing etc of class VIII complete all as specified and as directed.

Complete repair work only in existing ceiling board frame, any size or description, refixing in frame and ceiling tiles in any position or in any thickness, including cover fillets with nails complete all as specified and as directed by Engr-in-Charge. Note:- Rates also includes matarial in this item like T-Grid, suspended, galvanized mild steel items, level adjuster of any size etc as required at site.

M&L for 15mm thick rendering in cement mortar (1:4) on brick or concrete surfaces, finished even & smooth without using extra cement in patches not exc 5 Sqm each including finishes as per existing surrounding including taking down cement plaster of any description complete as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick rendering in cement mortar (1:6) on brick or concrete surfaces, finished even & smooth without using extra cement in patches not exc 5 Sqm each including finishes as per existing surrounding including taking down cement plaster of any description complete all as specified and as directed by Engineer-in-Charge.

M&L for 10 mm thick rendering in cement mortar (1:3) as in ceiling including finishing surfaces even and smooth without using extra cement on brick or concrete surfaces, finished even & smooth without using extra cement in patches not exc 5 Sqm each including finishes as per existing surrounding and Taking down cement plaster of any description complete all as specified and as directed by Engineer-in-Charge

M&L for repairing of RCC chajja, roof projection and faces of exposed reinforcement surface or damage loose RCC surface and applying one coat of cement slurry & filling with cement concrete (1:2:4) type-B-0 (using 12.5mm graded stone aggregate) and finished with cement sand mortar (1:3) using coarse sand in patch area n.exc 1 Sqm each & thickness of RCC member n.exc 150mm and reinforced with welded mesh of weight exc 2 Kg per Sqm but n.exc 3 Kg per Sqm and finally applying two coats of cement paint complete incuding scaffolding up to upto four storey complete all as specified and as directed. Note for ser item No. 112 to 115 : Rates also includes in this item used on wall / chajjas / band / facia / balcony etc upto four storey necessary scaffolding as required site

M&L for repairs to floor in patch work area n.exc 3.0 Sqm each of 40 mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L in repair cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate ) as in flooring, plinth, coping etc and similar work including necessary form work and demolition in patches complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks (using old size bricks) having minimum compressive strength straight 75 kg per sqcm, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition complete all as specified and as directed.

M&L for non skid ceramic coloured tiles of size (300mmx300mm) x7mm thick as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over 15mm thick screed bed in cement mortar (1:6) complete including dismantaling of existing tile complete all as specified and as directed. Note:- Rates also includes in this item for necessary raking, circular cutting or notching and waste on tiles

M&L for glazed ceramic coloured tiles of size (300mmx200mm) x 6 to 7mm thick, as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles over 10mm thick cement plaster in cement mortar (1:4) including dismantaling of existing tile complete all as specified and as directed. Note:- Rates also includes in this item for necessary raking, circular cutting or notching and waste on tiles

M&L for chequered cement concrete tiles (30cmx30cm) x 20mm thick as in patches in floor with grey cement and pigment set, jointed & pointed in neat cement slurry as in floor over cement screed 15mm thick in cement mortar 1:6 complete all as specified and as directed. Note:- Rates also includes in this item for necessary raking, circular cutting or notching and waste on tiles.

M&L for chequered cement concrete tiles glossy finish coloured 20 to 22 mm thick of any size and pattern as approved by GE as in patches in floor with set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over cement screed 15mm thick in cement mortar 1:6 complete all as specified and as directed.

S&F in repair 25 mm dia aluminium anodised drapery rod powder coated teak wood textured finish and wall thickness 1mm complete designed and pattern as approved complete all as specified and as directed.

S&F in repair end caps with wall ornament and fixed to 25 mm dia curtain rod with screws of design/shape complete all as specified and as directed by Engr-in-charge.

S&F in repair wooden (turned, weathered and mitred) brackets of Ist class hard wood pre-polished with french polish and touch wood with cut, hole suitable for 25mm dia dreproy rod fixed with screws and gutties in wall but end caps with wall ornament complete all as specified and as directed by Engr-in-charge.

S&F in repair Ist class hard wood turned and pre-polished 30 mm internal dia, 8-10 mm thick curtain rings including stainless steel hock complete all as specified and as directed.

Attending complaints related to plumber/ water supply and obtaining completion from user, this includes minor repair of taps by replacement of washers, tightening of taps, tightening of check nuts of PVC connection and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC flushing cistern, repair/ replacement of face mohra etc (Replacement of taps, PVC connections/ face mohra's of any description & any other material sall be paid separately as supply only.)

Attending complaints related to carpenter work, this includes repair and easing of doors, refixing or retightening of doors, windows, resecuring of door/window wire gauge, welding work, etc including nails, screws etc required to make good the work/to attend the complaint (Replacement of hinges, door/window shutters glass panes, wire gauze shall be paid separately.

Material and labour for repairing of existing bib cock by replacing its spindal /jumper/washer etc to make it functional complete all as specified and as directed.

Material and labour for repairing of old chromium plated bib taps, pillar taps, wash hand basin mixer, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engineer-in-Charge complete all as specified and as directed.

Supply and fixing looking mirror with PVC moulded frame and hard board back white colour of size 450mm x 600mm x 5.5mm thick complete all as specified and as directed.

Supply and fixing in repairs cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door for 75mm/100 bore pipe complete all as specified and as directed.

Material and labour for repairing of existing floor trap by cleaning and refixing the same in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 100mm dia complete all as specified and as directed.

Cleaning of blocked WC/ bath rooms/ kitchen gully traps including and upto first manhole by removing all choked waste in the pipe complete all as specified and as directed.

Material and labour for repairing of PVC low level/high level flushing cistern by changing its internal fitting complete all as specified and as directed.

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs upto and including 500 ltrs complete all as specified and as directed.

Description all as per Srl item No 137 here in before but of 1000 litre capacity tank complete all as specified and as directed.

Supply and fixing in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site.

Supply and fixing 125mm dia steel grating fixed in position complete all as specified and as directed.

Easing of existing steel rolling shutters by applying grease and mobilizing complete all as directed at site with and including all material and labour complete all as specified and as directed.

Supply and fixing in repairs PVC over head tank cover/lid of size suitable for capacity of above 500 ltrs and upto 1000 ltrs capacity complete all as specified and directed at site.

Opening of air lock/blockage in GI pipe line from outlet of water tank to all internal GI pipes/ fittings to enable smooth flow of water from bib taps/ shower/WHB pillar tap/stop valves complete by air pressure/ water gravity pressure etc complete all as specified and as directed.

S&F in repair PVC flush door solid panel fancy type both side with teak wood finish 30mm thick consisting of panel of hollow PVC profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. complete as per direction of Engineer-in-Charge, maufacturer's specification and drawing.

M&L for factory made solid panel fancy type PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with but both side 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & back face, supplying & fixing in frame at site as per specification & drawing.

M&L for factory made wire gauzed panel PVC door shutter 30 mm thick (style) consisting of from made out of MS frame shall be covered with beat moulded wood grain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and wood grain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of wood grain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, including stainless steel wire cloth 0.56mm dia of wire and average width of aperature 1.18 mm, and shall be warped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauze shall be stretched to tighten firmly, supplying and fixing in the frame at site as per specification & drawings.

M&L for framed work as in door or gate of angles or other sections with gusset plate, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering door etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (excluding of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete of Gde Fe-290(Gde E-165 complete all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet, strip of 20mm width stuck inside with solvent cement for stiles and plain. colour PVC sheet for top rail and bottom rail on either side and as gap in sorts of top rail and bottom rail padding of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the format site as per specification and drawing.

Easing of existing doors/windows of any description complete all as directed at site.

M&L for repairs to steel windows/doors by using welding machine where necessary thickness of each welding spot exceeding 6mm but not exceeding 9mm complete all as specified and as directed.

M&L for repair to steel gates and farme including welding box type hinges, other fittings and easing the doors and repair of cement patch work of gate pillar complete all as specified and as directed.

M&L for replacing of 15mm bore pipe GI fittings medium grade ISI mark like elbow, socket, nipple, tee etc complete all as specified and as directed.

Description all as per ser item No. 152 but 20 mm bore pipe GI fittings complete all as specified and as directed.

Description all as per ser item No. 152 but 25 mm bore pipe GI fittings complete all as specified and as directed.

Material and labour for replacing of under mentioned old unserviceable/ missing iron mongery for wooden joinery complete all as directed at site:- (a) Aluminium anodized, barrel tower bolt of extruded section, 100mm long

(b) Aluminium anodized, barrel tower bolt of extruded section, 150mm long

(c) Aluminium anodized, barrel tower bolt of extruded section, 200mm long

(d) Aluminium handle, cast type, anodized, 100mm size

(e) Aluminium handle, cast type, anodized, 150mm size

(f) Aluminium alloy, anodized sliding door bolt with hasp, staple and sliding bolts of extruded section 250mm long including fixing bolts

(g) Aluminium alloy, anodized sliding door bolt with hasp, staple and sliding bolts of extruded section 300mm long including fixing bolts

(h) Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, 75mm size

(j) Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized 100mm size

Shri Kanchan Engineers (BID ID -3441347)

JAIPAL AND BROTHERS (BID ID -3442734)