801499/E8 ADDN/ALTN TO SMQs PHASE-III AT AF STATION TAMBARAM

Amount

SCH 'A' PART-I (B/R Works) (Revised BOQ Dated 13 Jul 2021) Taking up or down old steel tubing 15mm bore and connection including cleaning for refixing or removal to store all as specified and directed.

Taking up or down old steel tubing 20mm bore and connection including cleaning for refixing or removal to store all as specified and directed.

S&F 15mm bore steel tubes medium grade galvanised with all fittings such as sockets, bends, unions, tee, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 and fixed complete to walls and ceiling or laid in floor all as directed.

S&F 20mm bore steel tubes medium grade galvanised with all fittings such as sockets, bends, unions, tee, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 and fixed complete to walls and ceiling or laid in floor all as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors etc) all as specified and directed.

Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors etc) all as specified and directed.

S & F in repairs Gun metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for fixing to iron pipes all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removing debris off the defence premises all as directed

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work and removing debris off the defence premises all as directed.(Reinforcement cut as required to facilitate demolition)

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches etc complete and removing debris off the defence premisesall as directed.

M & L for brick work with Fly ash bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified and directed.

M & L for brick work with Fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement/lime plaster from walls of any description, including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement on external surfaces of wall in two coats ( 5mm setting coat mixed with water proofing compound as per manufacturer's instructions by weight of cement over 10mm thick backing coat) complete all as specified and directed. Note: WPC will be measured and paid separately as supply only under relevant item.

M & L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement on internal surfaces of walls complete all as specified and directed.

M & L for rendering 5mm thick in CM 1:3 on concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Taking down door chowkats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but n. exc. 2.0 Sqm each and refixing in the same opening all as specified and directed.

S & F 2nd class hardwood factory made Glazed and skeleton 35mm thick shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats etc. complete all as specified and directed.

S & F 2nd class HW 35 mm thick factory made plain framed, panelled shutter (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.

S & F flush shutter 35mm thick solid core construction with particle board core and 3mm thick BWP Plywood face panels, commercial type on both sides with 6mm thick lipping all as specified and directed.

S & F first class hard wood (Teak wood) lipping of size 35mm x 6mm thick, fixed to flush shutters all as directed.

S & F second class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n. exc. 200 cu.cm each all as specified and directed.

S & F flush shutter 25mm thick solid core construction with block board and 3mm thick BWP Plywood face panels, commercial type on both sides including dismantling of boarding of any description all as specified and directed.

S & F in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup boards shelves, partitions etc., complete all as specified and directed.

S & F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, edges painted to match with prelaminated sheet all as specified and directed.

S & F 100 mm long stainless steel butt hinges with stainless steel screw all as specified and directed.

S & F Extruded aluminum alloy handles of size 150mm fabricated type anodised all as specified and directed.

S & F continous (piano) hinges mild steel, 40mm width of flaps (when open) , bright finish or electrogalvanised in repair all as specified and directed.

S & F Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed all as specified and directed.

S & F Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed all as specified and directed.

S & F MS sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12 mm dia and 300mm long including 6 Nos of bolt & Nuts all as specified and directed.

S & F cold rolled mild steel butt hinges medium weight 100mm long fixed to wooden/steel frame all as specified and directed.

S & F aluminium handles,cast type anodised of size 150 mm all as specified and directed.

S & F in repairs aluminium handles,cast type anodised of size 150 mm all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm long all as specified and directed.

S & F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 compelete all as specified and directed.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work and treating back of chowkats, area exc 0.1 Sq.M and n.exc 0.5 Sq.M each using tar or coal tar / black bituminous paint all as specified and directed.

M & L for PCC 1:3:6 type C1 (using 20 mm graded agg) as in coping, PCC block for fixing of hold fast, sanitary fittings etc., complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing) and removing the rubbish of the premises all as directed.

M & L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate), 25 mm thick as in floors finished rough for floor finishes complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, all as specified and directed..

M & L for glazed ceramic coloured tiles in vertical surfaces 300 x 200 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in cement mortar 1:4, all as specified and as directed.

M & L for Non skid ceramic coloured joint free tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6,all as specified and as directed.

All as per item No 46 here in before but as in skirting over and including 10 mm thick backing coat in cement mortar 1:4 all as specified and as directed.

M & L for rendering 10mm thick in Cement Mortar 1:3 mixed with water proofing compound as per manufacturer's instructions by weight of cement finished even and smooth with out using extra cement, complete all as specified and as directed. Note: WPC will be measured and paid separately as supply only under relevant item.

M & L for PCC type E2, 1:5:10 (using 40mm graded aggregate) in filling, mass concrete as in sunken floor complete all as specified and as directed.

M & L for PCC type C1, 1:3:6 (using 20mm graded aggregate), 75mm thick as in plinth protection complete all as specified and as directed.

M & L for Cement Concrete tile with grey cement & pigment 25cm x 25cm x 22mm thick machine pressed, set, jointed and pointed in neat cement slurry in floors, and cut and pre-polished including 15 mm thick screed bed in C M 1:6 complete all as specified and as directed.

M & L for PCC type D2, 1:4:8 (using 40mm graded aggregate), 75mm thick as in sub base complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M & L for Cutting chases, pinning in brick wall, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, shelves, cutting not exc. 10cm girth complete all as specified and as directed.

M & L for Cement Concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) 40mm thick, including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M & L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in water tank levelling course /platform/Kitchen shelves and like supported on walls including necessary use and waste of form work,exposed surface of concrete shall be finished even and smooth without using extra cement complete all as specified and as directed.

M & L for RCC nominal mix type B-1, 1:2:4 (using 20mm graded aggregate )in beams, cantilevers, lintel over 1.5m span complete all as specified and as directed.

Use & waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M & L for Reinforcement 10mm dia and over TMT bars cut to length, bent to shape reqd incl cranking, bending spirally for hooping, hooking ends and binding with and incl MS wire annealed (not less than 0.9 mm dia) and securing with clips fixing as rungs for climbing up to the roof top complete all as specified and as directed.

All as per item No. 59 above but 5mm dia and over, upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

S & F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed complete all as specified and as directed.

S & F 500 lit capacity rotational moulded double layered polyethylene water storage tank hoisted and fixed in position including dismantling of existing unserviceable PVC/ RCC tank complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required, reconnecting and refixing in position for 500 ltrs capacity tanks complete all as specified and as directed.

S & F in repair viterous china WHB angle back of size 400x400mm incl GI Brackets, CP brass waste coupling with check nut and washers, PVC conncetion and waste pipe of suitable length complete all as specified and as directed.

S & F in repairs Stainless steel plate rack of size 600 x 900 x 0.8 mm thick fixed to wall complete all as specified and directed

S & F in repair curtain rails of mild steel chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

S & F in repair 15 mm bore CP Bib tap, cast copper alloy, fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

Supply & fix 15mm bore two way bibcock, chromium plated , fancy type, screwed for iron pipe or brass ferrule, and fixed in repairs complete all as specified and directed

S & F in repair 15 mm bore pillar tap, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

Supply & fix 15mm bore angular stop cock, chromium plated, fancy type, screwed for iron pipe or brass ferrule, and fixed in repairs complete all as specified and directed

S & F in repair 15mm dia CP stop valve, cast copper alloy, screwed down, high pressure, fancy type, long shank and cup (concealed type) screwed both ends for iron pipe or for union complete all as specified and as directed.

Cutting holes in brick walls in cement mortar for inserting GI pipe and making good dismanlted portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick depth of embedded portion from the face of the jamb

S & F in repair low density polyethylene pipe (LDPE ) of presssure rating 6 Kg/ Sqcm of bore of pipe 40mm x 750mm long complete all as specified and as directed.

S & F PVC (SWR) Soil, Waste and Vent Pipe 75mm bore (dia), Single Socketed, in any length with rubber ring joint fixed to wall or laid in trenches etc., including taking down/up unserviceable pipe, complete all as specified and as directed.

S & F PVC (SWR) Soil, Waste and Vent Pipe 110mm bore (dia), Single Socketed, in any length with rubber ring joint fixed to wall or laid in trenches etc., including taking down/up unserviceable pipe, complete all as specified and as directed.

Refixing only PVC (SWR) Soil, Waste and Vent Pipe 75mm bore (dia), Single Socketed, in any length with rubber ring joint fixed to wall or laid in trenches etc., including taking down/up serviceable pipe, complete all as specified and as directed.

Refixing only PVC (SWR) Soil, Waste and Vent Pipe 110mm bore (dia), Single Socketed, in any length with rubber ring joint fixed to wall or laid in trenches etc., including taking down/up serviceable pipe, complete all as specified and as directed.

S & F PVC (SWR) 75mm bore (dia), Bends, any radius with access door and jointing with Solvent Cement complete all as specified and as directed.

S & F PVC (SWR) 110mm bore (dia), Bends, any radius with access door and jointing with Solvent Cement complete all as specified and as directed.

S & F PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and jointing with Solvent Cement complete all as specified and as directed.

S & F PVC (SWR) 110mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and jointing with Solvent Cement complete all as specified and as directed.

PVC (SWR) 75mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and jointing with Solvent Cement complete all as specified and as directed.

PVC (SWR) 110mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and jointing with Solvent Cement complete all as specified and as directed.

S & F PVC (SWR) vent cowl, size of bore 75mm complete all as specified and as directed.

S & F PVC (SWR) vent cowl, size of bore 110mm complete all as specified and as directed.

M & L for preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparation of old Wood and Wood based surfaces, of any description, not otherise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M & L for Preparation of old decorated surfaces of ceiling and applying one coat white wash complete all as specified and as directed.

M & L for Preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M & L for complete removal of existing treatment to the entire satifaction of Engr-in-Charge and applying two coats of cement base paint over a coat of primer on external wall surfaces, complete all as specified and as directed.

M & L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer on external surfaces, complete all as specified and as directed.

M & L for complete removal of existing treatment to the entire satifaction of Engr-in-Charge and applying two coats of distemper oil emulsion (Oil bound washable distemper), over a coat of primer complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion (Oil bound washable distemper), over a coat of primer complete all as specified and as directed.

S & F in repairs PVC valveless, syphonic action type flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets, PVC connection, PVC flush pipe 32 mm dia etc., complete all as specified and as directed.

Refixing only in repair PVC flushing cistern of 10 litres capacity, low level, including brackets, PVC connection, PVC flush pipe 32 mm dia etc., complete all as specified and as directed.

S & F in repairs PVC grating, round suitable for 150 mm dia and connecting up, fixed in repairs complete all as specified and as directed.

S & F in repairs Vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' trap (excluding fixing bolts, flushing cistern and flush pipe), and fixed in position complete all as specified and as directed.

S & F in repair Vitreous china squatting pan "Orissa " pattern including P or S trap of size 580X440 mm white with intergral foot rests, excluding flushing cistern including setting the trap and pan in cement / lime concrete all as directed & making good to the distrubed floors complete all as specified and as directed.

Supply and fix PVC Water closet Seat Cover white or Black, closed pattern with flat bottom and cover with PVC, aluminium or MS chromium plated hinge devises etc fixed in repair complete all as specified and as directed.

Supply and fix 15mm dia CP health faucet with 1 Mtr long flexible tube with necessary fittings complete all as specified and as directed.

S & F PVC (SWR) floor trap, dia of outlet 75mm plain with grating, including jointing with solvent cement complete all as specified and as directed.

S & F High density polyethlene (HDPE) pipe of dia 40 mm, pressure rating 6 kgf/SqCm fixed to wall or floor etc complete all as specified and as directed.

S & F sheet glass of ordinary quality 4 mm thick and glazing complete with beads fixed with screws in aluminium shutter in square exc 0.5sqm in each pane complete all as specified and as directed.

S & F sheet glass of ordinary quality 4 mm thick and glazing complete with beads fixed with screws in aluminium shutter in square n. exc 0.5sqm in each pane complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F Mild steel framed work such as ladder, framed baluster, walk ways, railing and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F Mild steel framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled/ welded for fixing of steel sheeting or other covering fixing complete with Fe-410-W (Gde-E-250-quality-A) complete all as specified and as directed.

S & F Mild steel plain black sheet 1.60mm thick as in covering to openings at roof slab complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended works.

M & L for complete removal of existing WPT course (i.e) bituminous felt, broken tiles, mud phuska etc., or any other kind of treatment surface over roof slab and cleaning of surface with wire brushes, removing of unsolvent materials and depositing of the same as directed at a distance n.exc 50m and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not lesss than 4 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm having softening point not less than 150° centigrade,having tensile strength of 650 N/SqCm in longitudinal and transverse direction respectively of the reinforcement tearing strength of 180 N by torch application including minimium 10cm side over laps and 15 cm end lap torch sealed and bounded and applying a coat of blown bitumen 90/15 over and below the membrane @ 1.20kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint after cleaing the surfaces by removing dust, dirt etc,as per manufacturers instructions and all as directed.

M & L for 50 mm thick (average thickness) plain cement concrete 1:2:4, type B-1 (using 20mm graded aggregate) bringing it up to the slope 1 in 75 by providing light weight meterials such as clinder, light weight concrete etc as required and as directed.

M & L for Rendering 10 mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer's instructions by weight of cement on roof surfaces, finished fair and even complete all as specified and as directed. Note: WPC will be measured and paid separately as supply only.

Supply only integral water proofing compound all as directed

S & F Ball valves 20 mm dia, high pressure of PTMT, with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight-455gms) complete all as specified and as directed.

S & F Ball valves 20 mm dia fixed in repair, high pressure of PTMT, with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight -455gms) complete all as specified and as directed.

M& L for Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed.

M & L for Post constructional Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

M & L for Post constructional Antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Supply and fix anodised aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., including joining cleats etc., complete all as specified

S & F powder coated (50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified

S & F powder coated (50 micron) anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M & L in repairs for 20mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

SCH 'A' PART-II (Internal Electrification) Taking down unserviceable sub main wiring any description along with PVC conduit/Casing capping/wooden batten/metal conduit and making good the disturbed surface all as specified.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store. Refixing/hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified.

M & L for painting of ceiling fans any sweep, complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust including writing of MES No. etc. complete all as specified and as directed.

Taking down unserviceable copper/ aluminium point wiring (light, fan, socket or power) complete fittings such as switches,sockets,ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc. complete all as directed and specified.

Point wiring complete with 1.50 sqmm single core PVC FRLS insulated un-sheathed 1100 volts grade copper conductor single core multi stranded drawn through with and including non metallic rigid PVC conduit accessories concealed on walls, suface on ceiling etc., with suitable clamps/ shaddles, including provision of 1.6 mm thick MS pressed steel terminal boxs concelled/surface in wall with 3 mm thick hylam sheet for housing switiches, sockets, fan regulators etc., including one run of 1.50 sqmm PVC insulated copper conductor for continious earth wire and connected to common earth dolly for One light point controlled by one switch.

All as per item No. 129 above but for One light point controlled by two, 2 way switches.

All as per item No. 129 above but for One fan point controlled by one switch

All as per item No. 129 above but for One socket point on same board with other switches

All as per item No. 129 above but for One socket point on Independent board

All as per item No. 129 above but for One call bell point controlled by one bell push

All as per item No. 129 above but with 2.5 sqmm for power point 15 amps.

S & F Switch piano flush type, 5 amps 240 volts single pole one way complete all as directed and specified.

S & F switch piano flush type 5 Amps, single pole 2 way complete all as directed and specified.

Supply and fix socket outlet 2 in 1, 5 pin 5 amps 240 volts flush type complete all as directed and specified.

Supply and fix switch socket outlet 2/3 pin 5 amps 240 volts flush type complete all as directed and specified.

S & F Bell push 5 Amps 230 Volts complete all as directed and specified.

S & F Call bell 230 volts single pole A/C fancy type Ding Dong bell and including taking out unserviceable old bell complete all as directed and specified.

S & F Ceiling rose surface PVC insulated three plates "JUMBO' type 240 volts complete all as directed and specified.

S & F Switch socket combination 2 in 1 multipurpose 5/15 amps 240 volts universal type complete all as directed and specified.

S & F Fan regulator electronic type with 5 step control suitable for 1200/1400 mm sweep ceiling fan complete all as directed and specified.

S & F LED Wall light fixture 6.5 W complete all as directed and specified. Make: Philips Cat Pat No.Vista Glow WT 120C or equivalent in CG/Bajaj/Havells

S & F LED light fitting 20 watt, basic all purpose surface mounted LED batten with polycarbonate housing & integrated electronic driver with 20 Watt LED 6000K (4 ft) lamp complete all as per Cat part No.LUMILINEBS20WLED865SPCWH of Havells Make or equivalent as mentioned in Annexure including taking down unserviceable fitting complete all as directed and specified.

S & F LED light fitting 9 watt, basic all purpose surface mounted LED batten with polycarbonate housing & integrated electronic driver with 9 Watt LED 6000K (2 ft) lamp complete all as per Cat part No.LUMILINEBS9WLED865SPCWH of Havells Make or equivalent as mentioned in Annexure including taking down unserviceable fitting complete all as directed and specified.

S & F Bulkhead light fitting LED luminares New generation energy saving IP65 Bulkhead luminaire with opal diffuser with 10W LED 6000K lamp complete all as per Cat part No.HEXAFT10WLED857SSYMBOPC of Havells Make or equivalent as mentioned in Annexure including taking down unserviceable fitting complete all as directed and specified.

Cutting chases, pinning in making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings steps, chills, sunshades, shelves, lintels etc and cutting chases for concealed conduit wiring etc. and making good cutting exceeding 10cm but not exceeding 20cm girth complete.

Sub main wiring two runs of 6 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through suitable size of PVC conduit and conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles including one run of 6 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly complete all as directed and specified. Note: Two runs of cable, one run of earth continuity conductor and one run PVC conduit shall be measured as one unit length.

Taking down the existing unserviceable Main switch/MCB DB from its position for fixing of new DB and making good the disturbed surface all as directed by Engr-in-Charge.

Supply & fixing of Sheet metal enclosure with distribution board Double Door 230 volts SPN 8 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections all as directed by Engr in charge

Supply & fixing of sheet metal enclosure MCB DB TPN 415 V, 4 ways double door type including 100 Amps MCCB,16 KA incomer with suitable bus bar all as specified and directed .

S & F MCB SPN 6-32 Amps, 'C' Curve, 10 KA , SP 240V all as specified and directed .

S & F MCB Single pole 6-32 amps, 'C' Curve, 10 KA , SP 240V all as specified and directed .

Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth wire 4.0 mm GI strip means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work. PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on completion. Note : The GI wire 4.0 mm and GI earth protection pipe 15 mm upto 7.5 mtr lenght is included in the unit rate and beyond 7.5 mtr shall be measured and paid seperately.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI wire 4.0 mm thick for inter connecting of earth electrodes all as specified and directed .

Supply and lay GI pipe pipe 15 mm dia, medium grade, for protection of earth continuity conductor all as specified and directed .

Disconnecting, removing carefully Tamper proof electronic meter and handing over in AGE E/M store yard for refixing all as directed by Engineer-in-Charge.

Fixing only tamper proof electronic meter any type and rating retrieved against Sl No.159 above in the same location or at new location within same Bldg.

meenakshi construction

Gnani Builders