Certain repair work steel and wooden furniture including painting and polishing at Mil Stn Beas under GE Kapurthala.

Amount

ALMIRAH STEEL SMALL Removing of old unsv shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as specified and directed by Engr-in-Charge. (FD-1032)

Removing of old unsv/broken legs and S&F new legs out of 1.00 mm thick PBI Sheet complete all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-1032

Removing of old unsv locks and S&F new locks to steel Almirah small FD-1032 complete all as specified and directed by Engr-in-Charge. Make:Godrej/Harrison

All as per Srl item No 03 above but CP Handle.

Removing of old paints and painting of steel Almirah small with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD-1032.

ALMIRAH STEEL LARGE Removing of old unsv shelves and S&F of new 1mm thick PGI Sheet shelves and fixing in position complete all as specified and directed by Engr-in-Charge. FD-1031

Removing of old unsv/broken legs and S&F new legs out of 1.00mm thick PBI sheet complete all as shown on Drg and complete all as specified and directed by Engr-in-Charge. FD-1031

Removing of old unsv locks and S&F new locks to steel almirah large complete all as specified and directed by Engr-in-Charge. . FD-1031 Make:Godrej/Harrison

All as per Srl item No 08 above but CP handle (as per existing size) FD-1031

Removing of old unsv paints and painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including prep of surfaces complete all as specified and directed by Engr-in-Charge. FD-1031

CHAIR CB STEEL WITH ARMS Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nut and bolt complete all as specified and directed by Engr-in-Charge. FD-75(M)

All as per Srl item No 11 above but back of Seat. FD-75(M)

Removing of old unsv arms and S&F new arms rest of teak wood including polishing complete all as specified and directed by Engr-in-Charge. FD-75(M)

M & L for Painting of one coat of synthetic enamel paint OG to chair complete incl preparation of old painted surface complete all as specified and directed by Engr-in-Charge. FD-75(M)

CHAIR CB STEEL WITH OUT ARMS Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished with nuts and bolts, complete all as specified and directed by Engr-in-Charge. FD-75(M)

All as per Srl item No 15 as above but back of seat FD-75(M)

M & L for painting of one coat of synthetic enamel OG paint incl preparation of old painted surface complete all as specified and directed by Engr-in-Charge. FD-75(M)

CHAIR DINING Removing of old unsv front leg and S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-279

All as per Srl item No 18 here in before but rear leg -ditto-FD-1105 & FD-279

All as per Srl item No 18 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning FD-1105 & FD-228

All as per Srl item No 18 here-in-before but stiffener -ditto- FD-1105 & FD-279

M&L for malemine polishing of chair dinning complete all as per drg, complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-279

Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg complete all as specified and directed by Engr-in-Charge. FD-1105 & FD-279

Chair Dining Long Back Removing of old unsv front leg and S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-357

All as per Srl item No 24 here in before but rear leg -ditto-FD-357

All as per Srl item No 24 above but side /front /rear rails of chair FD-357

All as per Srl item No 24 here-in-before but stiffener -ditto- FD-357

M&L for malemine polishing of chair dinning long back complete all as per drg, complete all as specified and directed by Engr-in-Charge. FD-357

Removing of old unsv rexine cover with cushion seat from bottom seat of chair dinning long back and S & F new rexine cover to bottom seat of chair dinning long back all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-357

Removing of old unsv rexine cover with cushion seat from back seat of chair dinning long back and S & F new rexine cover to back seat of chair dinning long back all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-357

CHAIR EASY Replacement of old unsv legs with new Shisham wood legs well seasoned free from shake and knots complete all as per drg, complete all as specified and directed by Engr-in-Charge. FD-229

All as per Srl item No 31 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning. FD-229

All as per Srl item No 31 above but back bottom size - 480 x20 x100mm. FD-229

All as per Srl item No 31 here-in-before but stiffener of size 50 x 25 x 500mm. FD-/229

All as per Srl item No 31 here-in-before but arms of size as shown on drg. FD-229

M&L for melamine polishing to chair easy complete all as per drg, as specified and as directed by Engr-in-Charge. FD-17/229

Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-17/229

TABLE 900X600X760 MM STEEL WITH AND WITHOUT DRAWER Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified & directed by Engr-in-Charge. FD-1007/1008 Make: Century/Greenply/Action Tesa

Removing of old unsv lock from table steel with drawer and S & F new lock complete all as specified and directed by Engr-in-Charge. FD-1007

M&L for painting of table with drawer with one coat of synthetic enamel paint OG over a coat of red oxide primercomplete all as specified and directed by Engr-in-Charge. FD-1007/1008

All as per Srl items 40 above but table without drawer. FD-1007/1008

Hat Stand with Mirror Removing of old UNSV hooks and S & F new hooks made of aluminium as per sample complete all as specified and directed by Engr-in-Charge. FD-233

Removing of old unsv mirror from hat stand and S & F new mirror complete all as specified and directed by Engr-in-Charge. FD-233

M&L for malemine polishing of Hat stand with Mirror complete all as per drg, complete all as specified and directed by Engr-in-Charge. FD-233

TABLE CENTRE Replacement of old unsv top and providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as per drawing, complete all as specified and directed by Engr-in-Charge. FD-274,235 Make: Century/Greenply/Action tesa

Replacement of old unsv legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drg and complete all as specified and directed by Engr-in-Charge. FD-274,235

All as per Srl item No 46 above but long rail. FD-274,235

All as per Srl item No 46 above but short rail. FD-274,235

M&L for melamine polishing to table centre complete all as shown on drg,complete all as specified and directed by Engr-in-Charge. FD-274,235

CHAIR VARANDAH Re-canning of Chair Varandah with half round plastic cane 4 mm wide best quality in Godrej pattern as shown on drg complete all as specified and directed by Engr-in-Charge. FD-256

S&F hard rubber shoes suitable for chair Varandah complete, complete all as specified and directed by Engr-in-Charge. FD-256

M&L for welding to Chair Varandah where required n.exc 2.5cm in length complete all as specified and directed by Engr-in-Charge. FD-256

M & L for Painting of one coat of synthetic enamel paint White to chair Verandah incl preparation of old painted surface complete all as specified and directed by Engr-in-Charge. FD-256

TABLE OFFICER STEEL Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified and directed by Engr-in-Charge. FD-1003 Make: Century/Greenply/Action Tesa

M&L for painting of table officer steel with one coat of synthetic enamel paint OG over complete all as specified and directed by Engr-in-Charge. FD-1003

S&F hard PVC shoe of best approved quality (as per existing size) complete all as specified and directed by Engr-in-Charge. FD-1003

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Offrs Steel complete all as specified and directed by Engr-in-Charge. . FD-1003 Make:Godrej/Harrison

Charpoy GI Pipe Removing of Old UNSV plywood from Charpoy GI Pipe and tightning of complete charpoy and S&F of New plywood (BWR) Commercial thick of size 2000mmx900mmx12mm thick fixed with 10 nos nut & bolts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm, 850mm long complete all as specified and directed by Engr-in-Charge. . Plywood shall be ISI marked and shall be make of - Duraply/ Kitply/ Archid/ Century/ Greenply FD-220

CHAIR WOODEN BOTTOM Removing of old unsv front leg and S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-285

All as per Srl item No 59 here in before but rear leg -ditto-FD-285

All as per Srl item No 59 above but side /front /rear rails of seat FD-285

All as per Srl item No 59 here-in-before but stiffener -ditto- FD-285

M&L for malemine polishing of chair wooden bottom complete complete all as specified and directed by Engr-in-Charge. FD-285

Removing of old unsv bottom seat plywood and S & F new bottom seat plywood made of 6mm thick commercial plywood all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-285

TABLE PEG Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD-277/384

Replacement of old unsv legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drg and complete all as specified and directed by Engr-in-Charge. FD-277/384

All as per Srl item No 66 above but long rail. FD-277/384

All as per Srl item No 66 above but short rail.FD-277/384

M&L for melamine polishing to table peg complete all as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-277/384

CHAIR WRITING CUSHIONED Replacement of old unsv front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drg complete all as specified and directed by Engr-in-Charge. . FD-1107

All as per Srl item No 70 above but rear leg. FD-1107

All as per Srl item No 70 here-in-before but stiffeners -ditto- FD-1107

All as per Srl item No 70 here-in-before but arms. FD-1107

M & L for malemine polishing of chair writing cushioned complete all as per drg,complete all as specified and directed by Engr-in-Charge. FD-1107

Removing of old unsv bottom seat cushioned and S & F new bottom seat cusioned cover with rexine cover all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-1107

Removing of old unsv back seat cushioned and S & F new back seat cusioned cover with rexine cover all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-1107

TABLE DINNING 6 PERSON Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging around complete all as shown on drg complete all as specified and directed by Engr-in-Charge. FD-273

Replacement of old unsv leg with new shisham wood leg well seasoned free from shake and knots complete as per drg, complete all as specified and directed by Engr-in-Charge. FD-273

All as per Srl item No 78 above but top long rail. FD-273

All as per Srl item No 78 above but top short rail. FD-273

M&L for malemine polishing of table dinning for 6 persons complete as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-273

CHAIR WRITING Replacement of old unsv front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drg complete all as specified and directed by Engr-in-Charge. FD-280/250

All as per Srl item No 82 above but rear leg. FD-280/250

All as per Srl item No 82 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning FD-280/250

All as per Srl item No 82 here-in-before but stiffeners -ditto- FD-280/250

All as per Srl item No 82 here-in-before but arms. FD-280/250

M & L for malemine polishing of chair writing complete all as per drg, complete all as specified and directed by Engr-in-Charge. FD-280/250

Re canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-280/250

TABLE 900 X 600 X 760 MM WITH OR W/O DRAWERS Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as shown on drg complete all as specified and directed by Engr-in-Charge. FD-223, 224

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, as specified and complete all as specified and directed by Engr-in-Charge. FD-223, 224

All as per Srl item No 90 above but top long rail FD-223, 224

All as per Srl item No 90 above but top short rail. FD-223, 224

All as per Srl item No 90 above but stiffener. FD-223, 224

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick pre-laminated particle board natural teak shade at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and as directed and as shown on drawing complete all as specified and directed by Engr-in-Charge. FD-223, 224

M&L for melamine polishing to table 900X 600X760mm without or with drawer complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD-223, 224

SIDE BOARD Removing of old unserviceable frame short rail and supply & fixing new short rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge FD-241, FD-1112

Removing of old unserviceable frame long rail and supply & fixing new long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge FD-241, FD-1112

Removing of old unserviceable back & supply & fixing new back made out of commercial ply wood 6mm thick confirming to ISI complete all as specified & as directed by Engineer-in-Charge. FD-241, FD-1112

Removing of old unserviceable top of side board S & F new top made out of pre-laminated particle board 18mm thick natural teak shade (Exterior gde) confirming to ISI provided with 4mm thick beading of teakwood on exposed edges complete all as specified & as directed by Engr-in-Charge. FD-241, FD-1112

Removing of old unsv knob and S & F new M.S. Knob 25mm dia dark brown coloured complete all as specified & as directed by Engr In Charge.FD-241, FD-1112

Removing of old unserviceable door of side board S & F new door made out of pre-laminated particle board 18mm thick natural teak shade (Exterior gde) confirming to ISI provided with 4mm thick beading of teakwood on exposed edges complete all as specified & as directed by Engr-in-Charge. FD-241, FD-1112

Smoothening of all exposed surfaces of side board to direct vision and applying two coats of French polish except pre-laminated melamine faced particle board complete all as specified and directed by Engr-in-Charge. FD-241, FD-1112

TEAPOY Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated Particle Board natural teak shade including 3mm thick teak wood edging all-round complete all as specified and directed by Engr-in-Charge. FD-278

Replacement of old unsv legs with new Shisham wood legs duly smoothed, size and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-278

All as per Srl item No 104 above but long rail. FD-278

All as per Srl item No 104 above but short rail. FD-278

M&L for melamine polishing to table Teapoy complete all as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-278

TABLE WRITING Removing of unsv top of table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified and directed by Engr-in-Charge. FD-249/275 Make: Century/Greenply/Action Tesa

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, complete all as specified and directed by Engr-in-Charge. FD-249/275

All as per Srl item No 109 above but top long rail FD-249/275

All as per Srl item No 109 above but top short rail. FD-249/275

All as per Srl item No 109 above but stiffener. FD-249/275

Replacement of old and broken drawers of table by providing new drawers complete all as per drg and specified and as directed made out of 18/19mm thick plywood commercial and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD-249/275

Replacement of old and broken bottom door of table by providing new door complete all as per drg and specified and as directed made out of 18/19mm thick Pre-Laminated Particle Board complete duly fitted with piano hinges complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD-249/275

M&L for melamine polishing to table writing complete all as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-249/275

BED PLYWOOD TOP Removing of old unsv head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood, polishing complete all as specified and directed by Engr-in-Charge as shown on drg and as directed FD-246

All as per Srl item No 116 above but foot board complete all as specified and directed by Engr-in-Charge. . FD-246

Removing of old unsv long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drg and complete all as specified and directed by Engr-in-Charge. FD-246

Removing of old unsv top and S&F new top of 12mm thick ply wood commercial with screws as complete all as specified and directed by Engr-in-Charge. Plywood shall be ISI marked and shall be of Make - Duraply/Kitply/Century/Greenply/Archid.FD-246

M&L for melamine polishing to Bed plywood top complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD-246

TABLE DRESSING LADIES WITH MIRROR Removing of old unsv top & supply & fixing new top with Plywood commercial 18mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge FD-378

Removing of old unsv bottom & supply & fixing new bottom made out of ply wood one side teak face 18mm thick complete all as specified & as directed by Engineer-in- Charge. FD-378

Removing of old unsv both sides of table & supply & fixing new sides with particle board 12mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade complete all as specified and as directed by Engineer-in-Charge FD-378

Removing of old unsv back & supply & fixing new back made out of plywood commercial 6mm thick confirming to ISI complete all as specified & as directed by Engineer-in-Charge. FD-378

Removing of old unsv ply wood of drawer & supply & fixing new ply wood commercial 4mm thick conforming to ISI complete all as specified & as directed by Engineer-in-Charge. FD-378

Removing of old unsv mirror and S&F new looking mirror for table dressing ladies (size 1220x360x5mm) thick electro copper plated duly fixed in shisham wood frame and back side covered with plywood commercial 4mm thick confirming to ISI, wooden frame shall be french polished complete all as specified and directed by Engr-in-Charge. FD-378

Removing of old unsv knob & supply & fixing new M.S. knob 25mm dia dark brown coloured complete all as specified & as directed by Engineer-in-Charge. FD-378

Removing of old unsv glass and supply & fixing new sliding glass 4mm thick with aluminum channel, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge FD-378

Smothening of old & new external surfaces with sand paper removing of balck dots and matching of the newly fitted components with original shade by polishing the complete with french polish complete all as specified and directed by Engr-in-Charge. FD-378

TEAPOY VERANDAH Removing of old unsv top and S&F new top made out of 18mm prelaminated particle board including 3mm thick teak wood edging all round all as per drg and complete all as specified and directed by Engr-in-Charge. FD-255/383

M&L for two coats painting of synthetic enamel paint, white shade including preparation of old painted surface complete all as per drg and complete all as specified and directed by Engr-in-Charge. FD-255/383

M & L for welding of steel frame where required n.exc 2.5 cm in length complete all as specified and directed by Engr-in-Charge. FD-255/383

S&F PVC shoes fixed on 20mm dia conduit pipe complete all as specified and directed by Engr-in-Charge. FD-255/383

Locker Steel Repair to locker steel ie welding to locker where ever required and removing of dents and applying one coat of synthetic enamel paint spray painting OG shade inside and outside complete incl removing of old painted surface complete all as specified and directed by Engr-in-Charge.

Removing of old u/s hasp and staples (locking device) and S & F new hasp and staples 100 mm long duly screwed of best quality as approved by GEcomplete all as specified and directed by Engr-in-Charge.

Removing of old u/s broken legs & S&F new legs made out of sheet PBI sheet 1mm thick complete all as specified shown on drg andcomplete all as specified and directed by Engr-in-Charge.

TABLE OFFICE CLERK STEEL Removing of unsv top of table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified and directed by Engr-in-Charge. FD-1004 Make: Century/Greenply/Action Tesa

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Office Clerk Steel. FD-1004 Make:Godrej/Harrison

M&L for painting of table office clk steel with one coat of synthetic enamel paint OG over complete all as specified and directed by Engr-in-Charge. FD-1004

S&F hard rubber shoe of best approved quality (as per existing size) specified and directed FD-1004

Sofa Set 5 Seated Removing of old unsv front leg and S&F new front leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-373

Removing of old unsv rear leg & S&F new rear leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-373

Removing of old unsv hand rest & S&F new hand rest made of Ist class hard wood (shisham) duly smoothed of size 730x70x35mm and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-373

Removing of old unsv seat frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 650x100x35 mm and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-373

Removing of old unsv seat frame long rail and S&F new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 1650x100x35mm and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-373

Removing of old unsv seat frame short rail and S&F new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 580x100x350mm and shape as shown on drg, complete all as specified and directed by Engr-in-Charge. FD-373

Smoothning of external surface of sofa (Five Seated 3+1+1) with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with two or more coats of French polish as approved by Engineer-in-Charge complete all as specified and directed by Engr-in-Charge. . FD-373

Supply only cushion of foam size 500 x 525 x 100mm of density 32 to 40. Make Kurlon/sleep well or equivalent.

Supply of cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality qas approved by GE complete all as specified and directed by Engr-in-Charge.

TABLE DINNING JCOs/OR Removing of old unsv top and S & F new 18/19mm thick pre-laminated Particle Board natural teak shade complete all as shown on drg complete all as specified and directed by Engr-in-Charge. FD/MAP-II/03

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drg, complete all as specified and directed by Engr-in-Charge. FD/MAP-II/03

All as per Srl item No 151 above but top long rail. FD/MAP-II/03

All as per Srl item No 151 above but top short rail. FD/MAP-II/03

M&L for melamine polishing to table dinning complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD/MAP-II/03

CHAIR VARANDAH Removing of old unsv PVC Bottom Seat from Chair Verandah and S & F of new PVC bottom seat of chair varandah complete all as specified and directed by Engr-in-Charge. FD/MAP-II/06

All as per Srl item No 155 above but back of seat of Chair Verandah. FD/MAP-II/06

Removing of old paints from Chair Verandah and painting with two coats of synthetic enamel paint white complete all as specified and directed by Engr-in-Charge. (FD/MAP-II/06)

BALWINDER SINGH AND SONS (BID ID -3087666)