CERTAIN REPAIR TO MD ACCNS OLD AND BI LINE, ABDUL HAMID VIHAR ACCN AND OFFRS MD ACCNS UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT

Amount

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed.

M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer and one coat of birla white putty complete all as specified.

M&L for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and as directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

M&L for preparation of new surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of cement base paint complete all as specified and as directed

"Supply only" integral water proofing compound (ISI Marked) all as specified and as directed.

M&L for plastering 5mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified and as directed

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old surfaces of walls including cornices, plasters etc (Plastered or unplastered surfaces) and applying one coats of cement base paint complete all as specified and as directed

M&L for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and as directed

M&L for one coat of white wash old plastered surfaces of ceiling including preparation of surface complete all as specified

M&L for hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and as directed

S&F sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and disposal of rubbish outside MD land complete all as specified

M&L for non-skid ceramic coloured tiles (premium quality) 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and including 15mm thick bedding layer CM 1:6 in complete all as specified

M&L for non-skid ceramic coloured tiles (premium quality) 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in while or coloured cement to match over and including 15mm thick bedding layer CM 1:6 complete all as specified

Ditto all as per srl item No. 16.00 above but in skirting and 10mm thick rendering as backing coat of CM 1:4

M&L for coloured glazed tiles (premium quality) of size 450x 350x7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for vitrified Ceramic tiles light shade (double charged), 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles over and incl 15mm thick screed bed in CM 1:6 complete all as specified

Ditto all as per srl item No. 19.00 above but in skirting and 10mm thick rendering as backing coat of CM 1:4

M&L for 25mm thick cement concrete (1:2:4) type B-1 (12.5 mm graded aggregate) to receive the top layer of tiles complete all as specified and as directed

M&L for 18-20 mm thick machine cut granite (of any type ) tiles stone jointed with neat cement slurry mixed with pigment to match the colour of stone incl cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and incl 15mm screed bed with CM1:6 including dismantling of existing granite complete all as specified and as directed

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

All as per srl item No. 23.00 here-in-before but area exc 1.5 Sqm and not exc 4 Sqm each

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, hold fast rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.

S&F pressed steel frames 125x60mm as per IS for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including PCC 1:5:10, type B-0 (20mm aggregate) filling in steel frame complete all as specified

Ditto all as per Srl Item No. 27.00 above but 105x60mm size complete

S&F for 35mm thickness of factory made flush shutter solid core construction with block board core & ply wood face panels, commercial type on both side including 35 x 6 thick 2nd class Hard wood lipping on edge, complete all as specified and as directed.

S&F glazed and skelton shutters factory made 35mm thick open rebated and prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) complete all as specified and as directed

Supplying and fixing steel windows/ventilators 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated double window (comprises of glazed shutter and gauged shutter) EWR sec 50 mm x 20 mm and 1 mm thick and four openable leaf consisting four Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with two vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 No per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 No per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 No per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf. (g) fabrication and fixing arrangement complete. Note:- Guard bar/ glass pane and wire gauge shall be measured and Paid separately

Ditto all as per Srl Item No. 31.00 above but in gauged shutters without sash bars all as specified and as directed

Ditto all as per Srl Item No. 31.00 abovee but in ventilators all as specified and as directed

M&L for powder coated aluminium door shutter having (Including chowkhat) 150mm x 44mm x 2.85mm thick bottom rail, 150 mm x 44mm x 3mm thick middle rail, 100mm x44mm x2.85 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm , Powder coated aluminium handle 200 mm long (02 Nos) , 3 Nos 100 mm size chromium plasted butt hinges, 2 Nos 200mm size Alu tower bolt and Aluminium body hydraulically door closer , designation No-3, universal type, weight between 61 to 80 kg etc inlcuding frame of section 100 mm x 44 mm x2.85 mm and door shutter, bottom portion covered with 9mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to Aluminium frame work and top portion covered with 5.00 mm thick tinted glass and pattern, one mortion lock (Make: Harrison ) with shutter and fixing including taking down of existing Chowkat with Shutter complete all as specifies and as directed by Engineer-in-Charge Make of aluminium section : Hindalco/Jindal

M&L for powder coated aluminium window shutters (Sliding window three track) side hung having 75 mm x 44 mm x 2.85 mm thick stiles bottom rail and top rail including necessary fitting joinery cleat glassing packing snap beading 10 mm x 10 mm , 4 x Nos of anodised aluminium handle 150 mm size, 8 x Nos of chromium plated butt hinges 75 mm size and 4 x Nos of 100 mm long Alu tower bolt etc including frame of section 100 mm x 44 mm x 2.85 mm and including 5.00 mm thick tinted glass and including aluminium grill and fixing including taking down of existing Chowkhat with Shutter complete all as specified & directed by Engineer-in-Charge. Make of aluminium section : Hindalco/Jindal

M&L for powder coated aluminium ventilator having 150mm x 44mm x 2.85mm thick bottom rail, 150 mm x 44mm x 3mm thick middle rail, 100mm x 44mm x 2.85 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm , Internal portion covered with 9mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination (colour/design approved by Engr-in-Charge) fixed to Aluminium frame work fixing including taking down of existing portion complete all as specifies and as directed by Engineer-in-Charge Make of aluminium section : Hindalco/Jindal

S&F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars parallel iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed

M&L for 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares not exc. 0.5 sqm in each pane complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing

S&F PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F in repair floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and as directed by Engineer-in-Charge

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and as directed.

S&F 250mm long CP mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S&F 100mm size butt hinges medium weight cold rolled mild steel all as specified

S&F100mm size stainless steel butt hinges for fixing to PVC doors all as specified.

S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt all as specified.

S&F 150 mm mild steel pressed handles oval type, stove enamelled black all as specified.

S&F aluminium anodised tower bolts 200 mm size fixed with machine screws complete all as specified and as directed.

S&F aluminium anodised Bow Handles 150 mm size fixed with machine screws complete all as specified

M&L for preparation of new wood surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparation of new or previously untreated steel surfaces of any description, n.exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed

S&F in repair Bib tap chromium plated, cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete all as specified and as directed.

S&F in repair fancy CP Bib Cock long nose (Foam Flow) with Flang suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy CP 2 way Bib Cock with Flange suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy CP center hole basin mixer (Swan Neck) of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy CP pillar cock with lift type operating, chromium plated of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy CP Concealed Stop Cock with Adjustable Wall Flange of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy CP angular stop Cock with Wall Flange of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy CP 2 way angular stop Cock with Wall Flange suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of makes of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy CP Sink cock swinging spout (Wall mounted) with connecting legs & wall flanges of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed Make- Jaquar/Cera/Kohlar

S&F in repair fancy Over Head Shower square wall shower (Adjustable) of size 100mm including all fittings of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy Hand Shower 100mm round shape(ABS Body chrome plated with Gray face plate) with 1.50 Mtr flexible tube and hook of suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair fancy towel rail/rod, D type, 600mm long of fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed. Make:- Jaquar/ Cera/ Kohlar

S&F in repair fancy towel ring square type flange of fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

S&F in repair health faucet 1.00mtr long flexible tube & wall hook of suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed.

S&F in repair health faucet (ABS body)mild steel chromium plated suitable for 15mmdia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed Make:- Jaquar/ Cera/ Kohlar

S&F in repair Jet spray with holder for EWC 1.00 mtr long of suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed.

S&F in repair, toilet paper holder of fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.

S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and as directed.

S&F in repair new flexible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and as directed

S&F in repair, Coloured PVC bath Cabinet of size 450x450x90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

S&F in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.

S&F in repair, Sheet Glass Corner Shelves Assembly (Transparent), consisting of 5.5mm thick Sheet Glass Shelf with Chromium plated Bracket Guard and Railing, complete all as specified and as directed.

S&F in repair fancy chromium plated soap dish, complete all as specified and as directed.

S&F in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified

S&F Vitreous China White Wash Down Water Closet Pan (EWC) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /disturbed surfaces including dismantling the existing unserviceable Water Closet complete all as specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern) including seat cover and flushing pipe for pedestal pipe etc. complete all as specified and as directed

S&F coloured vitreous china wash down one piece water closet with seat cover , hinges, Accessories set, size 380x655x765mm floor mounted fitting with twin flush fitting with inlet ball valve float and handle, incl fixing bolt, with bottom and cover and mild steel chromimum plated hinging device with complete fixed in repairs all as specified and as directed by Engr-in-Charge. Make- Jaquar/Cera/Kohlar

S&F Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan including provision of Lime Concrete Bedding and Making Good to Floor/disturbed surfaces and fixed-in-repairs, complete all as specified and as directed. Make- Jaquar/Cera/Kohlar

S&F squatting pan WC Orissa pattern size 580 x 440 mm white with integral foot rest with P or S trap including provn of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified and as directed

S&F in repair, White Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed.

S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Cistern complete all as specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brackets complete all as specified and as directed

S&F Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) with pedestal including 32mm bore (dia) Brass Chromium plated Waste Fitting, a pair of Cast Iron Bracket duly painted / Erecting Stand including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing unserviceable Wash Basin complete all as specified and as directed. Make- Jaquar/Cera/Kohlar

S&F in repair, Stainless Steel Sink with Drainage Board 1.0mm thick Over-all size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. Make:- Blustar/ Jayna/ Nirali/ Jainako

S&F in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum), complete all as specified and as directed. Make:- Blustar/ Jayna/ Nirali/ Jainako

S&F in repair, Stainless Steel Kitchen Rack of size 750x800x200mm (Thickness of Sheet not less than 0.63mm) with Mild Steel Brackets and fixed to Wooden Plugs with Chromium Plated Brass Screws and Cup Washers, complete all as specified and as directed.

S&F chromium plated grating 125 mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and as directed.

S&F in repair CP grating 125mm dia with centre hole all as specified and as directed by Engineer-in-Charge

S&F in repairs 32mm dia PVC waste coupling for WHB or Sink (half or full threaded) complete all as specified and as directed

M&L for chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and as directed.

M&L for dis-connecting existing PVC tank of any capacity, setting aside (or lowering, if required) for repairs, cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and finally washing the internal surfaces with bleaching powder/soap solution etc, re-connecting and re-fixing in position including making connections and writing Cleaned on ____ (Date) and 'Next Date of Cleaning ____ (Date), 4" height on outer face of tank with white paint complete all as specified and as directed

Demolition of RCC water tank of any description and removes the debris from the roof and disposed it out of defance land, complete all as specified and as directed

S&F rotational moulded synthetic (HDPE), UV Coating, antimicrobial (white) water storage tank 500 litre capacity (cylindrical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank, complete all as specified & directed Make:- Sintex/ Rotex/ Seheetal

S&F rotational moulded synthetic (HDPE), UV Coating antimicrobial (white), water storage tank 1000 litre capacity (cylindrical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank, complete all as specified & directed Make:- Sintex/ Rotex/ Seheetal

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified

S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and as directed.

M&L Galvanised iron water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking down the existing tubing complete all as specified

All as per srl item No. 106.00 here-in-before but for 20mm bore tube

M&L for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade fixed in repair all as specified.

S&F in repairs 20mm dia curtain rails, mild steel , chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified

M&L for PVC (SWR) floor trap with grating including jointing to waste pipe fixed with solvent cement (diameter of outlet in 75mm) including taking out damaged floor trap in any type and position complete all as specified and as directed

Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage at any circumstances (Kitchen, Bathroom and Toilet) all as specified and as directed by Engineer-in-Charge. Make:- WACKER SILICONES (GP Silicone Sealant )

S&F PVC (SWR) pipes 110 mm dia with single socketed in any length with rubber/steel ring joints fixed on brick walls or laid in trenches with PCC 1:4:8 complete houching with bedding including demolition and braking up existing pipes with fittings complete all as specified and as directed.

Ditto all as per srl item No. 112.00 above but 75 mm dia complete

S&F PVC (SWR) bends 110 mm with access door complete all as specified and as directed.

Ditto all as per srl item No. 114.00 above but 75 mm with access door complete

S&F for 110mm PVC (SWR) vent cowl complete all as specified and as directed.

Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as specified and as directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) all as specified.

Ditto all as per srl item No. 118.00 above but except bricks complete

Demolition of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) all as specified

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and as directed

M&L for 10mm thick cement plaster in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, on concrete roof surfaces finished even and fair, including cleaning the roof top by scraping down with water etc all as specified and as directed by Engineer-in-Charge (WPC shall be measured and paid separately under appropriate item of this BOQ).

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V-groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacture. Making of Gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acylic of cement weight complete all as specified and as directed

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator” complete all as specified and as directed

M&L for repairing of R.C.C projections, chajjias, roofs, facia and ceiling etc by necessary preparation. Scarping, cutting, chiselling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2 kg per sqm but n.exc 3kg/sqm (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand necessary form work and applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and as directed by Engineer-in-Charge

M &L for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:- (i) Application of Two component acrylic modified cementitious coating (aa) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:- (bb) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (cc) Dampen all surfaces immediately ahed of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO. (dd) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions.

(ee) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (ff) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (gg) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (hh) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces three sides including dismantiling of existing tiles. (jj) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. (kk) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645.

(ll) All the corners and joints should be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (mm) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (nn) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (ii) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (iii) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around. (iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate) complete all as specified. (v) Providing drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall (Approx 450mm to 600 mm long ) including cutting to existing wall and making good the disturbed surface complete all as specified and as directed.

(vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. Note:-Item No 25 (iv) ,(v) &(vi) shall be measured and paid separately

M&L for cement concrete 1:5:10 type E-2 (using 40mm stone aggregate) as in sunken flooring complete all as specified

S&F drainage spout pipe GI pipe 40mm dia bore light grade upto outside of outer wall (Approx 450mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and as directed

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (reinforcement to cut as required to facilitate demolition)complete all as specified and as directed

M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick as in sub base of flooring complete all as specified and as directed.

M&L for 75mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth with using extra cement with joint/panel filled grade 'A' bitumen compound complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 18 to 20 mm thick set with grey cement and pigments jointed and pointed in neat coloured cement slurry in floors over and including 15 mm thick cement screed bed in cement mortar (1:6) including demolition of old tiles/concrete floor all as specified and as directed

M&L for laying 60mm thick machine pressed precast concrete interlocking paver block and shape and size conforming to IS-15658-2006 of M-35 grade with grey cement and pigment including demolition of old paver blocks complete all as specified and as directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE

M&L for 25mm sand cushion, filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sides of rounded or chamfered on edges of interlocking/ chequered tiles, bed block concrete complete all as specified and as directed

Uprooting of trees, grass, bushes etc from brick wall/roof tiles or any surfaces of bldg including dismantling the required brick work /roof tiles/mud concrete etc for uprooting the vegetation etc and make good the same to match existing surfaces with same material or concrete 1:2:4 type B-1 after pouring the chemical (which destroy the growth of vegetation to place where vegetation removed).The rate shall include for scaffolding or any other arrangment required during this process upto 10 mtr height complete all as specified

S&F factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets

Ditto all as per Srl item No. 140.00 above but One side Laminated Board complete all as specified

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised., width of flaps when open in 30mm complete all as specified and as directed

S&F stainless steel self close hinges/clip (Dadoo Kabja) on for kitchen cupboard ,complete all as specified and as directed

S&F 75mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed

S&F for Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), PCC 1:2:4, Type B0 (12.5mm graded aggregate) including all mouldings with frame Set in CM 1:4 including dismantling/ demolition of existing louvers/jallies complete all as specified and as directed

M&L for welding in repairs not exceeding 2.5cm in length & thickness of metal to be welded not exceeding 6mm complete all as specified and as directed.

S&F for anti-dusting rubber beading for door shutter for anti-snakes, dusting etc all as specified and as directed

M&L in repair to steel rolling shutter of area not exceeding 8 Sqm and any description including repairing of ball bearing, top cover, anchoring rod, hasp and staple, gear operated system, crank handle, chain wheel and hand chain including necessary welding, greasing etc and making the shutters serviceable complete all as per existing pattern as specified

S&F for fancy toilet paper holder of chromium plated fixed to walls CP brass screws complete all as specified

M&L for broken glass pieces embedded in PCC 1:3:6 (75 mm thick) on boundary walls including demolition of old glass pieces complete all as specified and as directed by Engr-in-charge

M&L for reinforced cement concrete (1:2:4) type B-1 (20 mm graded aggregate) slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for MS TMT bars 10mm and over dia and cut to length, bent to shape required including cranking bending spirally for hooping for clos hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed

M&L for formwork to soffits of suspended slabs such roof slabs, floor slabs, shelves, landings and similar work, not exceeding 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc. complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and as directed.

S&F in repair factory made built-in steel cup board with pressed steel frame and pressed steel shutter 1.0mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 20mm dia with brackets fixed on inner side of cupboard, provn of MS peg set 3 pegs fixed on inner side of shutter and 1.00mm thick black sheet 3 Nos shelves as shown in Drg including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No CEJZ / TD-1104/08 Sheet 1/2 to 2/2, including dismantling of shelves/shutter etc complete all as specified and as directed.

S&F Hasp & Staple aluminium 100 mm, including bolt to hinge plate and fixed with screws with Cup Board shutter, all as specified

S&F in repair Stop valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron complete all as specified and as directed.

S&F in repair 15mm angle stop valves, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and complete all as specified and as directed.

S&F in repair acrylic corner set of 3 pieces (Size - 11", 9" & 7" and minimum thickness 5mm) as per sample approved by Engineer-in-charge all as specified and as directed

S&F in repair Pillar tap (Swan Neck), cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe (min size 300 mm) or union complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges in repairs complete all as specified and as directed

Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing and writing month of cleaning with stencil having 3 inch height as site requirement complete all as directed by Engineer-in-Charge

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails, post etc and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250 Quality 'A' , including dismantling complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified

S&F Pre-painted galvalume aluminum zinc coating AZ 150, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-painted Galvalume Aluminum Zinc Coating AZ 150, GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Note for above work:- (a) Contr shall submit at least three samples of material for approval of GE. (b) Make of sanitary fittings:- Jaquar/ Cera/ Ess-Ess (c) Make of plumbring work:- Parryware/ Hindware. (d) Make of Non skid/ Glazed/ Vitrified tiles:- Kajaria/ Somany/ Orien bell. (e) Make of Galvalume sheets :- TATA Blue Scope/ JSW/ RINL. (f) After completion of work area shall be made clean all spot/ Moss/ Debris shall be removed from site without any extra cost of Govt.

UNITED ENGINEERING CORPORATION (BID ID -3374500)

Sanjiv Kumar (BID ID -3374001)