Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance S O GHULAM MOHD R O BOGDANG | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹78.2 L
EMD Value
₹1.6 L
Closing Date
22 Nov 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Const.Div.Leh.
Office of the Exe.Engineer Const.Div.Leh
Reconstruction of middle school Ayu Saboo
2022_PWD_8272_3
99 of CDL leh of 2022-23
Open Tender
Civil Works - Others
Item Rate
60 days
Leh
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
Payable To Ex.Engineer const.Div.leh
₹1.6 L
1 Dec 2022
31 Oct 2022
24 Nov 2022
1 Nov 2022
22 Nov 2022
1 Nov 2022
Amount
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :
Ordinary Rock
Dumping stone including cost of stones in Horizontal on level
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
Dry random rubble masonry with hard stone in foundation and plinth: With bond stone
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand)
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate ) finished with a floating coat of neat cement including cement slurry and curing complete , but excluding the cost of nosing of steps etc, complete 50 mm thick with 20 mm nominal size stone aggregate .
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Columns, pillars, piers, abutments, posts and struts
Stairs (excluding landings) except spiral staircases.
Suspended floors, roofs, landings, balconies and access platforms.
Edges of slabs and breaks in floors and walls Under 20 cm wide
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other of approved make conforming to IS: 733 and IS : 1285, fixed with dash fastener of required dia , and size including necessary filling up gaps at junctions i.e , at top , bottom and sizes with required EPDM rubber / neoprene gasket felt etc. Aluminium sections shall be smooth , rust free, striaght , mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling , C.P brass / stainless steel screws , all complete as per architectural drawings and the directions of Engineer - in -charge (glazing , panelling and dash fasteners to be paid for separately.)For fixed portion aluminium (Anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coading of grade AC 15)
For shutters of doors , windows & ventilators including providing and fixing hings / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately ) Anodised aluminium (Anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door , window , ventilator shutters and partitions etc.with EPDM rubber /neoprene gasket etc complete as per the architectural drawings and the directions of Engineer - charge . (Cost of aluminium snap beading shall be paid item) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg/sqm)
Providing and fixing 12 mm thick prelaminated partical board flat pressed three layer or graded wood particle board (conforming to IS : 12823 Grade -I type -II ) in panelling fixed in aluminium doors , windows hutters and partition frames with C.P brass/ stainless screws etc complete as per architectural drawings and directions of engineer-incharge .Pre- laminated particle board with decorative laminated pasrtice board with decorative on both sides.
Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete 125x64x2.50 mm
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100mm
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. PN-16 pipe , 25mm OD(SDR-7.4)
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge PN-16 pipe , 32mm OD(SDR-7.4)
Providing and fixing white China pedestal type water closet (Indian type ) with 100 mm sand cast iron P or S trap, 10 litre low level PVC flushing cistern including flush pipe (of approved make ) manually controlled device , including cutting , making good the walls and floors wherever required .Orissa pattern white vitereous floors wherever required .Orissa pattern white vitreous China W.C pan of size 580x440 mm with integral type foot rests
Providing and fixing wash basin with C.I /M.S brackets, 15 mm C.P brass pillar taps , 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required .White Vitreous China Wash basin size 550 x400 mm with a pair of 15 mm C.P brass pillar taps
Providing and fixing white vitreous China pedestal for wash basin completely recessed at the back for the recessed at the back for the reception of pipes and fittings
Providing and fixing PVC soil waste and vent pipe of required dia including bends , Tee door bend , L bend trap jointed with addisive material ISI marked like Prince vector or equivalent brand all complete a) 75 mm
Providing and fixing toilet paper holder C.P brass
Providing and fixing PTMT liquid soap container 109 mm wide , 125 mm high & 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and color , weighing not less than 105 gms
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings ,PVC pipe 40 mm dia
Providing and fixing 15 mm nominal bore of standard back type C.P brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg
Providing and fixing 15 mm nominal bore C.P stop cock (concealed ) of standard design and of approved make conforming to IS : 8931
Providing and fixing mirror of superior glass (of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
Providing and fixing 15 mm nominal bore C.P brass bib cock of approved quality conforming to IS:8931
Providing and fixing floor jail
Providing and fixing K-flex insulation to PPR"s pipes in internal walls
Providing and fixing of insulation for bath room pipe i.e , Ist layer of glass wool binded with mesh , K- flex and cover with aluminium sheet all complete job
Providing and fixing of electrical heat tape with thermostat all complete job
Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing of insulation for Sintax i.e ,1st layer of glass wool binded with wire mesh, black polythene sheet, nitrile insulation sheet and cover with aluminium sheet all complete job
Carriage of materials from source to site by mechanical trasport a)Cement avg lead 03 km
b)Sand avg lead 10 km
c)Agg avg lead 10 km
d)Stone avg lead 15 km
M/S TSEWANG DORJAY GOVT CONTRACTOR
M/S MEHDI ALI GOVT CONTRACTOR
M/S SANGAY PHUNTSOG
M/S RIGZEN WANGTAK
M/S JIGMET NAMGIAL
M/S GHULAM MOHD SOFI
M/S TASLIM AHMED
M/S ABDUL MAJID GOVT CONTRACTOR
M/S TSERING DORJAI
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .