PROVN OF 16 X ENERGY EFFICIENT LED STREET LIGHT FITTINGS WITH POLES ROUND THE KLP ALONGWITH BOUNDARY WALL 05 X SPLIT AC WITH VOLTAGE STABILIZER IN JCOS MESS (CLUB) AND SUPPLY AND INSTALLATION OF FOUR ELECTRIC CHIMNEY (ONE FOR OFFR MESS ONE FOR JCO

Excavating in trenches, n exc 1.5 m wide, or n exc 10 sq m on plan, depth exc 1.5 m but n exc 3.0 m for foundation, etc. or for laying of cables, poles , pipes etc. and getting out in soft/loose soil complete all as specified and directed. Note :- Entire excavation shall be carried out manually only. No machinery such as JCB / excavator shall be used for excavation to avoid damage of existing electric supply / water supply / signal assets. This aspect shall be noted while quoting the Bid.

Excavating in trenches not exceeding 1.5 metre wide, exceeding 1.50 m but not exceeding 3.00 metre in depth and getting out in hard/dense soil all as specified and directed. Entire excavation shall be carried out manually only and not through excavator/JCB to avoid damage of existing electric supply/water supply/signal assets. This aspect may be noted while quoting the bid.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and directed.

Removal of surplus soil not exceed to a distance of 50M where directed at a level not exc . 1.5M above the starting point

Supply, laying , jointing and testing underground LT cable XLPE insulated heavy duty, galvanised steel strip or wire armoured, PVC sheathed multistranded,1100 Volts grade, of cross sectional area 10 sqmm 4 core with aluminium conductor as per IS 7098 (Part-I) along with suitable size with aluminium cable lugs (bottle neck /eye let/ ring type as per ground requirement) and cable gland joint etc. laid in trenches, along poles passing through pipes, laid under floor, fixed on walls/roofs and passing under road etc complete all as specified and directed. Note : Earth works, sand cushioning,bricks,GI pipes etc will be measured and paid under respective items.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate including use and waste of form work for pole coping/ any description all as directed.

S&F in trench/on wall in repairs GI tubing light grade 50 mm dia for road crossing and cable protection etc complete all as specified and directed by Engr In Charge.

S&F steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410-SP-31 (9.0 metres long) and shifting of conductors and insulators etc including painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and interally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer including marking of pole number with black paint in yellow circle complete all as specified and directed. (Note:- Necessary earth work, PCC coping will be measured and paid for separately under respective items.)

S&F LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : Havells /Crompton/Philips

S&F street light junction box made up of 3 mm thick CRCA Sheet steel enclosure front openable including MS Fixing clamps made up of 32 x 6 mm MS flat duly painted, GI nuts, bolts and washers of suitable size and the size of junction box shall not be less than 30 cm x 27 cm x 15 cm having 200 Amps rated aluminium bus bar of length not less 15 cm long for 3 phase 4 wire system mounted on Porcelain/epoxy insulators and provn of one MCB SP 2.5 to 6.0 Amps with locking arrangement complete all as specified and directed.

M&L for sub main wiring with 3 core PVC insulated stranded copper conductor 2.5 sqmm served with an inner sheathing of PVC tape, 1100 volts grade heavy duty cable drawn through and including PVC rigid Conduit and fixed on wall /poles etc and connected to light fittings all as specified.Note : One runs of 3 Core PVC cable 2.5 sqmm & one run of PVC conduit will be considered as one unit.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate including use and waste of form work of concrete for foundation of pole complete all as specified and as directed

Earthing complete with galvanized steel pipe electrode size 40 mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 metre below normal ground level with top edge of the earth plate not less 1.5 metre below normal ground level connected with and including GI strip of size 32x 6 MM by means of bolts and nuts check nut and washer of galvanized iron with & including PCC pit in PCC 1:2:4 type B-1, precast RCC cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 7.5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point, and testing on completion including taking down old unsv earthing, complete all as specified and directed. Note :- (i) RCC pit cover shall be cast of RCC (1:2::4) type B , 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lie if CI cover and the rate includes in the unit rate . (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate. (iii) Earth pit Cover shall be painted in Red paint over a primer and the rate included in the unit rate.

ed with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set including necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and supply and fixing the following incoming and out going accessories all as approved and comprising as under : Incoming :- (a) MCCB 4 Pole, Micro processor release, breaking capacity 36 kA at 415V, 50Hz, 63 Amp 415V (Make : L & T Cat No CM92153OOOOX1 or equivalent in Legrand/Schneider) - 01 No. (b) Indicator Lamps (LED type) showing R,Y, B phase - 01 set. Outgoing :- (a) 3 pole street light power contactor with astronomical timer relay 24 hrs, fuses, complete suitable for 32A capacity - 01 No including necessary O/L, SPP & S/C protection relay complete for street light connection . (b) Angle iron base frame of required size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 50 x 50 x 6 mm thick angle iron duly painted - 01 No.

S&F LT Street Light Control panel board, Outdoor type,double door, cubical type, padestal mounted, overall size not less than 600 x 450 x 250 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with 99 % copper bus bar of 200 Amp rating for 3 phase and neutral, 4 wire system duly insulat

M&L GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bre (dia), medium grade, 1.20 Metre long bent to shape as per specified for fixing Sreet Light fitting including suitable size of clamps and applying two coats of Aluminium Paint over a coat of Aluminium Primer complete all as specified and as directed.

Note :- Air Conditioning Unit shall have following technical specification :- (a) Model Type Voltas 185 V Vectra Elegant (b) Voltage range :- AC shall operate on voltage range from 110 V to 285 Volts (c)Min Coolong capacity - 2425 W (d) Max Cooling capacity - 5300 W (e) Rated Cooling capacity 100 % - 4850 W (f) Electricity Consumtion (Annual Based on 1600 Hours BEE Norms ) - 751.21 KWH/Year (g) Nos of fan speed - Auto/turbo/High/Med/Low (h) Fan Motor Type - BLDC (j) Expansion Device - EVV (k) Valve Size - 12.7 mm/6.35 Gas/Liquid (l) Refrigerant - R-32 (m) ODU Dimension (wxhxd) - 83.5 X55.5X29.5 CM (n)Compressor Type - High EER Twin Rotary - BLDC (o) copper pipe - 3.5 Mtr (p) ODU code - 4513350 (q) IDU code - 4553290

S&F Voltage Stabilizer for automatic operation , single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230V with accuracy of +/- 2.5% and of capacity 4 KVA Make :- Voltas Cat NO. VA4090 - 4 KVA-90V-300V or Eqvilent make of V-Guard / LG

S&F Sheet metal enclosure for distribution boards double door, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 8 ways, supplied and fixed including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make ABB/Legrand/C&S

S&F Sheet metal enclosure for distribution boards single door, suitable for fixing MCBs 240 volts with 200 Amps rated bus bar, SPN, 2 ways, supplied and fixed including making good the disturbed surface of wall, complete all as specified and as directed by Engineer-in-Charge. Make ABB/Legrand/C&S

MCB suitable for 6 to 32 Amps, 240 Volt AC supply single pole and neutral with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge. Make ABB/Legrand/C&S

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. Make ABB/Legrand/C&S

S&F Electric chimney with FRP housing,toughened glass front panel ,baffle filter,push button control,energy efficient motor with top having size 900 mm,air flow 1350 Cum/hr,life time warranty complete with hanging/fixing accessories including chimney exhaust pipe extended upto 12 feet with cowl cover including fixing clamps and accessories complete all as specified & directed by Engr-in-charge. Make : FABER Model : ZENITH FL SC AC BK or Equivalent Make/Model in KAFF CASTO/Glen Model/Crompton/Hindware Specifications : (i) Wall Mounted Chimney (ii) Chimney size : 900 mm (iii) Air Suction Capacity : 1350 CMH (iv) Product Weight - 13.5 Kg (v) Dimension of Product : 89.9 cm x 36.9 cm x 97.9 cm (vi) On device control type : Touch Control (vii) On Device control :Gesture Sensor Touch control (viii) Power Consumption : 250 Watts (ix) Voltage Rating : 220 Volt (x) Frequency : 50 Hz

One multi pin socket 15/16Amps, Independent.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosures with socket, plug top complete with one single pole MCB -240 Volt- 20 AMP complete all as specified and as dircted by Engr-in-charge. Note : For AC Point.

S&F Ice making machine of capacity 90 Ltrs ,Self standing ,made out of Stainless Steel Body , Air Cooled with Eco Friendly Refrigerant R-404A working on Single Phase Power Supply 43 Kgs/24 hrs rated capacity and 25 Kgs Ice Storage Bin complete all as specified and as directed as per Engineer-in-charge.