ELECTRICAL WORK

Amount

Fabrication of shed for snd pit and in the switchyard by fabrication of support frame in hut shape of approx 1.8 mtr height & 3.5x3.5 mtr size in rectangular shape by M.S Angle of suitable size. This work also includes grouting of vertical support for above hut by 1:2:4 cement, coarse sand and 20 mm stone ballast. Preparation of sand pit of side 2.50x1.50x0.6 mtr using Ist class bricks in 1:4 cement sand by making 9" woall with both side plaster. Providing of asbestos sheet at the top of the shed and fixing with J-Bolts. Top up of sand pit by filling with fresh and fine Yamuna sand approx 4 Cu Mtr GI/MS angle shall be provided by the department free of cost and all T&P, labour and other required material shall be arranged by the contractor at his own cost.

Fabrication of fire bucket shed of size 2 Mtr width x 2 Mtr heightx 2.5 Mtr length by using angles and Fabrication of fire Bucket stand for 8 Buckets by using angle for frame and round bar for Bucket. The stand should be covered with asbestos sheet at the top of the shed and fixing with J-bolts the stand should be painted with one coat of red oxide primer and two coats of post office enamel paint after rubbing with sand paper to the surface of fire bucket stand. The stand should be named "FIRE" AND vkx written by white enamel paint on both side of stand.

ANSH ELECTRICAL AND ENGINEERING WORKS

OHM ENTERPRISES AND ENGINEERS