Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC 21 GURUKRIPA PATIL LAYOUT GOPLA NAGAR NAGPUR 440022 | NAGPUR | NAGPUR | MAHARASHTRA | 440022 | ₹32.0 L Quoted ₹33.4 L | L1 | Accepted-AOC Award of Contract. |
| 2 | L2₹35.2 L+₹1.8 L (5.31%)Rejected-Finance BINDODPUR KALIBARI KATIHAR 854105 BIHAR | KATIHAR | KATIHAR | BIHAR | 854105 | ₹35.2 L+₹1.8 L (5.31%) | L2 | Rejected-Finance Rejected |
| 3 | L3₹36.4 L+₹3.0 L (9.09%)Rejected-Finance | ₹36.4 L+₹3.0 L (9.09%) | L3 | Rejected-Finance Rejected |
| 4 | L4₹36.8 L+₹3.4 L (10.3%)Rejected-Finance | ₹36.8 L+₹3.4 L (10.3%) | L4 | Rejected-Finance Rejected |
| 5 | L5₹37.4 L+₹4.0 L (12.1%)Rejected-Finance 00 HAIDARPUR JAMALPUR ROAD SADAR JAUNPUR UTTAR PRADESH 222001 | JAUNPUR | UTTAR PRADESH | 222001 | ₹37.4 L+₹4.0 L (12.1%) | L5 | Rejected-Finance Rejected |
Tender Value
₹31 L
EMD Value
₹62,000
Closing Date
19 Jul 2022, 6:00 pmClosed
GE AF PURNEA
GE AF PURNEA, P.O - CHUNAPUR AIR FIELD, DIST- PURNEA BIHAR, PIN CODE- 854303
REPAIR TO PATH BRICK DRAIN CULVERT FENCING BOUNDRY COMPOUND WALL REPAIR AND CLEANING OF SEWAGE LINE SOAK PITS SEPTIC TANK CLEANING OF RCC PVC RESERVIORS AND CERTAIN OTHER MISC WORK IN TECHNICAL AND DOMESTIC AREA AT AFS PURNEA UNDER GE AF PURNEA
2022_MES_534275_1
8976/E8
Open Tender
Civil Works
Works
270 days
GE AF PURNEA
Please refer Tender Documents.
6 documents required · 6 mandatory
₹500
GE AF PURNEA
₹62,000
Yes
14 Sept 2022
28 Jun 2022
21 Jul 2022
28 Jun 2022
19 Jul 2022
12 Jul 2022
Amount
Dismantling of bricks (laid flat or on edge) or brick tiles and interlocking tiles laid dry and laid dry and pointed in floors, channels, kerbs,apron etc complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and paving nexc 15cm thick above or below ground level complete all as specified and directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and directed.
M&L for 75mm thk plain cement concrete (1:3:6) type-C2 (40mm graded stone aggregate) as in Plinth protection or sub base as in floor etc,complete all as specified and directed.
M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate ) as in sub-base complete all as specified and directed.
M&L for Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 60 mm thick ,hydraulically pressed cemented tiles of grey colour with pigments,(glossy finish/ rubber mat finish) factory made, confirming to IS 15658-2006, M-35 grade as in floor laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed by Engineer-in-charge. (Note - (i) Sand for the above said work measured and paid seperatly) (ii) Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.
M&L for brick work modular size with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified and directed by E-in- charge.
M&L for brick work using old size bricks straight or curved on plan exceeding 6.00 Meter mean radius, built in cement mortar (1:6) ,complete all as specified and directed.
All as per item No. 10 but except bricks complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
M&L for 15mm thk rendering in cement mortar (1:4) on brick masonry surfaces or fair faces surface of brick work finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparationof new plaster wall surface and applying three coats of white wash complete all as specified and directed.
M&L for plain cement Concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and directed.
M&L for plain cement Concrete (1:2:4) type B2, (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
M&L for plain cement Concrete (1:3:6) type C1 (using 20mm graded aggregate) as in coping cills, plinth courses string courses, bed plates, Kerbs etc with & including necessary formwork, complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) for Surface channels and drains complete all as specified and directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 30 CM inner girth in cement concrete using extra cement incl forms moulds mitered/ stopped ends etc complete all as specified and directed.
Demolition of reinforced cement concrete in ground floors and paving nexc 15cm thick above or below ground level complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) type B-0 (1:2:4) (12.5 mm graded aggregate) for Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses etc complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) type (12.5 mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed
Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia complete all as specified and directed.
M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for 10mm dia mild steel round bars as line bars for fixing chain link fencing, conforming to FE 410 W( Gde-E-250) quality or FE 290 (Gde -E-165) complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in natural ground , including taking out embedded portion and making good disturbed ground.complete all as specified and directed.
All as per item no. 27 above but embeded in concrete ground and including taking out embeded portion and making good distyrbed surface ,complete all as specified and as directed.
M&L for 25mm thick (measured solid) providing precast cement concrete louvres and jallies type B0, 1:2:4 (12.5 mm graded stone aggregate) set in cement mortar ( 1:4), , including all mould- ings including frame ,complete all as specified and as directed.
Dismantling of fencing wire mesh, any type complete all as specified and as directed.
Excavation in post holes (or similar holes) each n.exc. 0.5 Cum and getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making surface good complete all as specified and as directed.
M&L for mild steel angle/flat iron supports for posts/strut for securing barbed/chain link fencing any description including drilling holes, notching for wire etc , conforming to FE 290 (Gde -E-165) complete all as specified and directed.
S&F mild steel screw bolt (Machine made) with washers and nuts one end screwed of 10 mm dia and 65 mm long fixed to posts complete all as specified and directed.
Supply only chain link fencing net MS galvanised, made out of GI wire of 8 to 10 mm gauge, aperature not exceeding 65 mm, weight not less than 3.5 kg/sqm all as specified. Note : Payment shall be allowed after ascertaining weightt of chain link as per actual at site through BOO as ordered by GE.
Fixing only chain link fencing including line wire any mesh any type including securing bolts etc complete all as specified & directed.
M&L for preparation of new or previously untraeted steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide zinc chrome primer complete all as specified and directed.
M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but n. exc 200Sq.cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.complete all as specified and directed.
M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n. exc 100Sq.cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.complete all as specified and directed.
Supply and fix galvanized 2 steel barbed wire 2.24 dia with 2 MM dia barbed at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directe by Engr-in-charge (each line wire to be measured). complete all as specified and directed.
Supply and fix as in repair galvanized 2 steel barbed wire 2.24 dia with 2 MM dia barbed at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directe by Engr-in-charge (each line wire to be measured). complete all as specified and directed.
Excavation in trenches not exceeding 1.50 Mtr wide and not exceeding 1.50 Mtr deep for foundation etc or for shafts, well, cesspits manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.50m in depth and getting out in soft/loose soil complete all as specified and as directed.
Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.
Removing excavated material (soil) exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.
Returning, filling in incl spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft /loose soil complete all as specified and directed.
Cleaning of sewage line (drain pipe) from manhole or from cleaning eyes or from inspection chamber towards septic tank / soak well by roding, watering and removing the solid /liquid sludge and foreign materials completely from inside pipe and depositing in a excavated pit to a distance exceeding 50 m where directed includingnecessary returing filling and removing of surplus soil if any after deposting sludge for 150 mm bore of pipe and below sprinking , bleaching powder around and surrounding areas of the deposting areas.complete all as specified and directed.
All as per item No 46 above but for 200 mm bore of pipe etc complete all as specified and directed
Cleaning of septic tanks/manholes soak well etc by de-watering and setting out liquid sludge or any foreign materials from inside and removing to a distance exc. 100 mtr and depositing in a excavated pits to a distance exc. 100 mtr where dirrected including necessary returning filling and removing of surplus soil if any after depositing sludge and sprinkling of bleaching powder all around of pit/ pits,including covering with a layer of earth and respositioning of the RCC/CI cover slab, complete all as specified and directed
All as per item No 48 above but for dense sludge etc complete all as specified and directed
Cleaning of blockage of Indian/european type water closet by using hand pump with rubber bucket or by opening the inspection eye by using cleaing rod etc till clear flow of water is observed and finally cleaning the water closet by flush of water complete all as specified and as directed.
Cleaning of blockage of floor/nahani/Waste pipe of wash hand basin/sink/bath rooms/Kitchen by using hand pump with rubber bucket or by cleaning rod till clear flow of water is observed complete all as specified and as directed.
Demolition and breaking up drain pipe internal dia 150mm set in cement mortar (excluding cement concrete bed etc, which will be measured separately). complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
S&F reinforced concrete drain pipes, class NP3, 150mm internal dia, laid and jointed in cement mortar with collars complete all as specified & directed. Note:- Excavation earth work concrete bed and haunching shall be measured and paid separately.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in bed concrete for foundations, filling and mass concrete complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for keys, scrubbing down with water, etc complete all as specified and as directed.
M & L for providing pre cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slab set in cement concrete 1:6 including necessary form work all as directed. (Note:-Reinforcement measured and paid separately).
M&L for plain cement concrete (1:2:4) type B2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.
S&F in repair 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall including fittings, complete all as specified and as directed.
S&F PVC (SWR) Bends 110 mm dia with access door complete all as specified and directed.
S&F PVC (SWR) Junction Single 'T' 110 mm dia with access door complete all as specified and directed.
S&F PVC (SWR) branch piece of 110 mm dia,double (double Y) equal or unequal complete all as specified and directed.
S&F 110 mm PVC (SWR) vent cowl complete all as specified and directed.
Cutting into existing manholes for connecting new drains of 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required,complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc exc 250 ltr but n.exc 500 ltr,and writing the following "TANK CLEANED/ CHANGED ON _______".complete all as specified and directed.
All as per item No 65 but for exc 500 ltr and n.exc 1000 ltr,complete all as specified and directed.
Cleaning and removing all scale and dirts etc from MS overhead tank from the mouth of circulating pipe after removing the deposits washed out the tank by using soda, ash, bleaching powder etc of capacity 20000 Gallen including writing the following . (i) TANK CLEANED/ CHANGED ON _______" and testing on completion all as specified & directed by Engr-in-charge.
Cleaning and removing all scale and dirts etc from RCC overhead tank from the mouth of circulating pipe after removing the deposits washed out the tank by using soda, ash, bleaching powder etc of capacity 50000 Gallen including writing the following . (i) TANK CLEANED/ CHANGED ON _______" and testing on completion all as specified & directed by Engr-in-charge.
M/S. R.D. Construction
M/s.Keshab Chandra Ghosh
M/s. Rakesh Roshan
M/S. R.K. ENTERPRISES
ALAM ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .