Supply and erection of lift using RCC structures

Amount

Dismantling and clearing away of RCC by using deploying machineries for existing Superstructure including cost of all materials, labour charges, all leads and lifts etc, complete as directed by the Engineer at site.

Dismantling the brick masonry wall for providing lift and clearing away from site incuding the cost of labour,lead, all T&P's etc., complete as directed by the Engineer at site.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders including all labour charges, lead, lift, T&Ps etc., complete as directed by the Engineer in charge.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in soft disintegrated rock, lateritie soft rock or Kankar not requring blasting including all labour charges, lead, lift, T&Ps etc., complete as directed by the Engineer in charge.

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in medium and dense medium rock not requiring blasting for foundation including all labour charges, lead, lift, T&Ps etc., completeas directed by the Engineer in charge.

Supplying and filling M sand (Approved quarry) well watered and consolidated in foundation and basement in layers complying with standard specification, including cost of all materials, all labour charges, lead, lift, T&Ps etc., complete as directed by the Engineer in charge.

Providing P.C.C. 1:3:6 using OPC 53 grade cement (DALMIA/ULTRATECH/ RAMCO),M sand 12 to 20mm HBG metal (Approved quarry) for flooring and basement including cost of all materials, labour charges, curing, T&P, lead, lift etc., complete as directed by the Engineer in charge.(By using mixer machine).

Providing Plain Cement Concrete in 1:4:8, using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO) ,M sand , 40mm HBG metal (Approved quarry) including cost of cement, all materials, labour charges, curing, all leads, lifts, as per standard specification etc., complete as directed by the Engineer in charge.(By using mixer machine)

Providing RCC 1:1.5:3 mix using OPC 53 grade cement (DALMIA / ULTRATECH /RAMCO), M sand ,12mm to 20mm graded HBG metal (Approved quarry) including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., but excluding cost of steel reinforcement.complete as directed by the Engineer in charge.(By using mixer machine and vibrator).

Providing Column with Reinforced cement concrete (RCC) in 1:1 ½ :3 mix using OPC 53 grade cement (DALMIA/ ULTRATECH/ RAMCO), M sand, 12 to 20mm (machine crushed) metal (Approved quarry) for Column with centering shuttering form work including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (But excluding cost of steel reinforcement.) RCC Columns upto 4.50M

Providing Column with Reinforced cement concrete (RCC) in 1:1 ½ :3 mix using OPC 53 grade cement (DALMIA/ ULTRATECH/ RAMCO), M sand, 12 to 20mm (machine crushed) metal (Approved quarry) for Column with centering shuttering form work including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (But excluding cost of steel reinforcement.) RCC Columns upto First floor

Providing Column with Reinforced cement concrete (RCC) in 1:1 ½ :3 mix using OPC 53 grade cement (DALMIA/ ULTRATECH/ RAMCO), M sand, 12 to 20mm (machine crushed) metal (Approved quarry) for Column with centering shuttering form work including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (But excluding cost of steel reinforcement.) RCC Columns upto Second Floor

Providing Column with Reinforced cement concrete (RCC) in 1:1 ½ :3 mix using OPC 53 grade cement (DALMIA/ ULTRATECH/ RAMCO), M sand, 12 to 20mm (machine crushed) metal (Approved quarry) for Column with centering shuttering form work including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete. (But excluding cost of steel reinforcement.) RCC Columns upto Third floor

Providing Lintel beam with Reinforced cement concrete (RCC) 1:1.5:3 mix using OPC 53 grade cement (DALMIA/ULTRATECH/RAMCO),M sand ,12mm to 20mm graded HBG metal (Approved quarry) including cost of form work, centering and shuttering, cost of all materials, labour charges, vibrating the concrete, curing, all T&P, lead, lift etc., but excluding cost of steel reinforcement. complete as directed by the Engineer in charge. (By using mixer machine and vibrator).

Providing Roof slab with Reinforced cement concrete (RCC) in 1:1 ½ :3 mix using OPC 53 grade cement (DALMIA/ ULTRATECH/ RAMCO), M sand, 12 to 20mm (machine crushed) metal (Approved quarry) with centering shuttering form work including cost of cement, all materials, labour, curing, vibration charges, with shuttering, all leads, lifts, as per standard specification, etc., complete as directed by the Engineer in charge. (But excluding cost of steel reinforcement.)

Brick work in CM 1:5 using IInd class chamber burnt bricks (230x110x70mm), OPC 53 grade cement (DALMIA/ ULTRATECH /RAMCO) ,M sand approved quarry including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete as directed by the Engineer in charge.-upto Ground Floor

Brick work in CM 1:5 using IInd class chamber burnt bricks (230x110x70mm), OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO), M sand approved quarry including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete as directed by the Engineer in charge.-First floor

Brick work in CM 1:5 using IInd class chamber burnt bricks (230x110x70mm), OPC 53 grade cement (DALMIA / ULTRATECH / RAMCO), M sand approved quarry including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete as directed by the Engineer in charge.-Second Floor

Brick work in CM 1:5 using IInd class chamber burnt bricks (230x110x70mm), OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO), M sand approved quarry including cost of all materials, scaffolding, labour charges, curing, lead, lift, T&P, etc., complete as directed by the Engineer in charge.-Third Floor

Providing steel reinforcement using Fe 550 TMT bars (TATA/SAIL/JSW/VIZAG) having for all RCC works including cutting, bending, binding, tying and placing in position including cost of steel, galvanized binding wire, lead, lift and etc., complete as directed by the Engineer in charge at site.

Plastering in CM 1:5, 12mm thick using OPC 53 grade cement (DALMIA/ ULTRATECH/RAMCO),P sand approved quarry for exterior surfaces including cost of all materials, scaffolding charges, labour charges, curing, lead, lift, T&P etc., complete as directed by the Engineer in charge.

Colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Asian paint ultima/Dulux weather shield/Nippon water bond) of approved quality and colour over a coat of exterior emulsion water based primer in exterior and interior surfaces including through scrapping, clean removal of dirt, cost of all materials, scaffolding, labour, lead, lift etc.,and including necessary crack filling paste, putty whereever required complete as directed by the Engineer in charge.

Providing two legged scaffolding using 15 cm dia casuarinas post of 4 m over all length (3 M Height + 0.5 M Projection + 0.5M into the Ground) the distance between the two rows bing 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1 M width,etc. in a complete from using coil and nails.(Outer side) whereever required complete as directed by the Engineer in charge.

Providing two legged scaffolding using 15 cm dia casuarinas post of 4 m over all length (3 M Height + 0.5 M Projection + 0.5M into the Ground) the distance between the two rows bing 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1 M width,etc. in a complete from using coil and nails. (Inner side) whereever required complete as directed by the Engineer in charge.

Supply, installation, testing and commissioning of one complete passenger elevator system (Make: Johnson / KONE / OTIS) suitable for G+2 floors, with a rated capacity of 8 persons (544 kg), serving all floors, complete in all respects as per the following specifications and with including Overload indicator, Fireman’s switch, Automatic Rescue Device (ARD), Battery -operated emergency alarm and light, Two-way intercom with Press & Speak system in COP, all materials, accessories, and fixtures as required, all elevator components shall be of SS Grade 304 where applicable, One-year free service after installation and complete in all respects as per the direction of the Department Engineer with following description. Rated Speed: 1.25 m/s. Machine Type: Gearless. Drive System: Microprocessor-based VVVF (Variable Voltage Variable Frequency). Shaft Type: RCC with Red Brick (RCCRB) with shaft size 2150X1550MM. Overhead -4500MM. Pit Depth -1800MM. Cabin Dimensions (W x D): 1.30 m x 1.10 m. Car Door Type: Power-operated automatic sliding door. Number of Door Panels: 2 panels (center opening). Door Drive Type: Linear door drive system. Car Door Dimensions (W x H): 800 mm x 2000 mm. Lift Cabin Material: Stainless Steel (Grade 304, 1.5 mm thick). Lift Cabin Finish: Hairline finish. Ceiling Type: Sleek circular design with SS hairline finish. Ceiling Lights: 3 Nos. LED lights. Fan: Regular circular fan. Handrail: Stainless steel round handrail on rear wall. Extra Cabin Load Allowance: 54.4 kg. Landing Door Frame & Finish: SS Grade 304 (1.5 mm), hairline finish, for all landings (1–3). Car Operating Panel (COP): Full-length type with SS faceplate (hairline finish). COP Button Model: IS4-BAS128 (Round type). Car Display: Orange square dot-matrix scrolling display, vertical type, located on COP. Call Register Signal (Car): Provided. Floor Annunciator: Provided. Landing Operating Panel (LOP): Wall-mounted with grouting, located at each landing (1–3). Call Register Signal (Landing): Provided. SS Braille Buttons: Provided (COP & LOP). Over-Speed Governor: Provided. Door Protection: Infrared door safety screen.

Wiring with 2 x 1.5 sqmm (36/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling for lights, fan and buzzers with PVC accessories in wall with GI switch box and 6A modular switches with continuous earthing for providing 2.5 Sq.mm multistrand PVC wire of PVC light point / Fan point with 5amps switch, ceiling rose, cable, pipe, etc., The wiring should be Finolex or its equivalent make and Switch box/Switches should be Legrand/MK/equivalent with ISI mark including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge. For light and Fan points.

Supplying and fixing of Bulk Head fitting suitable with Guard and 15W LED bulb (Philips/ Havells or equivalent make) including cost of All materials,labour, lead, lift, transport, etc., complete.

Supplying and fixing of 300mm Sl bracket with fancy glass shade and 7w/9w led bulb(Philips/ Havells or equivalent make) including cost of all materials,labour, lead, lift, transport,etc., complete.

Earthing as per PWD standard with an earth electrode of 2M class B GI pipe of dia not less than 32mm complete with neceesary masonry work including cost of all materials, labour, lead, lift, etc., complete as directed by the Engineer in charge.

Supplying and laying of 4 Core 6 sq.mm PVC armoured cable of FINOLEX/RR/CRI ISI make suitable for submergible motor and approved quality for borewell including cost of all cables, copper wire/ropes for binding, leads, lifts, transportation charges, etc, complete as directed by the Engineer in charge.

Supply and run of 2 of 2.5 sqmm (56/0.3) FINOLEX/RR/CRI ISI make PVC insulated SC unsheathed Cu Conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.5sqmm wire with painting of suitable colour complete as directed by the Engineer in charge.

Supplying and providing (Legrand /(L&T) make 8ways 3 phase DB ( HORIZONTAL THREE PHASE ISTRIBUTION BOARD WITH MCBS 8 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / threephase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for commodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm.) complete as directed by the Engineer in charge.

Supplying and fixing of 63A TPNMC switch(Legrand /(L&T) make with suitable angle iron frame work with MS cable entry boxes with earth connection only including the cost of all mateials, lead, lift, labour charges,etc., complete as directed by the Engineer in charge.

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor of cable 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall Metal switch box with 5A 3 pin modular type non interlocking CS plug with continuous earthing for providing 2.5 Sq.mm multistrand PVC wire for making good of concealed portion with suitable color for concealed PVC plug point cable, pipe, etc., The wiring should be Finolex or its equivalent make and switch box should be Legrand/MK/Schneider make with ISI mark including cost of all materials such as cables, pipes, etc., complete as directed by the Engineer in charge.

Supplying and fixing of 4Module Boxes as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: Legrand/L&T,Schneider)

Supplying and fixing of 6A switch 2w -1Module as per standard specification including cost of all materials, labour, lead, lift, etc. (Make: Legrand/L&T, Schneider)

Transporting the surplus excavated earth from with a lead of 2km over the initial lead of 10m and lift of 2m, depositing in places and spreading including all labour charges, lead, lift, T&Ps etc., complete as directed by the Engineer in charge.

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu

M.SARAVANAN CONTRACTOR (BID ID -1437867)