Construction of 01 Nos. 220/132kV,160MVA GIS ICT Bay at 400kV GIS Substation Noida Sector -148 (GautamBudh Nagar)

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction and commissioning of 01 no. 220/132kV GIS ICT Bay at 400kV GIS S/S Sector-148, Noida

Tender Specification No. : ESD-8/241

SCHEDULE OF QUANTITIES AND PRICES FOR 02 NO. 132KV GIS LINE BAYS (Outdoor) AT 400KV GIS SUBSTATION AGRA SOUTH

( All Prices are in Rupees )

Sl. No. EQUIPMENT / ITEM (Complete with all fittings, accessories, associated equipments etc. as specified in Technical Specifications) Unit Quantity Quoted Unit prices in Rs. (Exclusive of GST and other duties & taxes) Total FOR Destination Prices without GST (6x10)

Unit Ex-Works Prices Unit Pkg, Fwdg, Charges Unit Freight & Insurance charges Total unit rate without GST (7+8+9)

1 POWER TRANSFORMER AND PROTECTIVE EQUIPMENTS

1.1 220/132 KV 160 MVA T/F with all accessories. No. 0

1.2 198 KV Polymer Type Surge Arrestor No. 3

1.3 120 KV Polymer Type Surge Arrestor No. 3

1.4 245 KV Post Insulator No. 3

1.5 145KV, 6KN Bus Post Insulator No. 3

2 GIS EQUIPMENTS

2.1 Transformer (HV Side of 160 MVA, 220/132 KV) Bay Module as per 400 KV S/S TS Set 1

2.2 220 KV Bus Bars as per 400 KV S/s TS Set 1

2.3 220 KV GI Bus Ducts(3-ph) as per 400 KV S/s TS Mtr 125

2.4 Bus Bar extension for connecting new 245 KV GIS bays with existing Bus Bar Set 1

2.5 220 kV Bus Bar Extension including adaptor Module Integration No. 1

2.6 Suitable SF6/Air Bushing for Connecting with Bus Duct with All Fittings and Accessories No. 3

2.7 Transformer (LV Side of 160 MVA, 220/132 KV) Bay Module as per 400 KV S/S TS Set 1

2.8 132 KV Bus Bar Extension including adaptor Module Integration required for connecting new 145 KV GIS Bays with existing Bus Bar No. 2

3 POWER CABLE AND CABLE TERMINATION

3.1 132 KV 1-Core 630 sqmm XLPE Copper Power Cable (Armoured) Mtr 750

3.2 145 KV Termination Kit for 1x630 sqmm XLPE Copper Cable (Outdoor Type) Set 3

3.3 145 KV Termination Kit for 1x630 sqmm XLPE Copper Cable (GIS End) Set 3

3.5 Cable Route Marker No. 5

3.6 Terminal Connector for Termination Kit No. 3

3.7 Twin Moose Spacer No. 00

4 Control and Relay Panel and SCADA

4.1 220 kV T/F Control Panel for 160 MVA T/F (as per technical specifications of SAS issued by UPPTCL) with integration with existing SAS No. 1

4.2 220 kV T/F Protection Panel for 160 MVA T/F (as per technical specifications of SAS issued by UPPTCL) with integration with existing SAS) No. 00

5 1.1 KV Armoured Aluminium Power Cable

5.1 4Cx16Sqmm KM 1

6 1.1 KV Armoured Copper Control Cable

6.1 2Cx2.5sqmm KM 00

6.2 4Cx2.5sqmm KM 00

6.3 6Cx2.5sqmm KM 00

6.4 10Cx2.5sqmm KM 10

6.5 14Cx2.5sqmm KM 00

7 GROUDING AND EARTHING SYSTEM

7.1 40mm MS Rod for Main Earthmat Mtr 300

7.2 40mm dia MS Electrodes of 3mtr length No. 50

7.3 75x12 MS Flat Mtr 200

7.4 50x6mm MS Flat Mtr 150

7.5 25x6mm MS Flat Mtr 100

7.6 50x6mm Copper Flat (For GIS Earthing) Mtr 200

7.6 75X12mm Copper Flat (For GIS Earthing) Mtr 200

8 GALVANISED STRUCTURE

8.1 Lattice Type Main and Auxiliary Structure MT 1

8.2 ERW Pipe Type Structure MT 2

9 CABLE SUPPORTING ITEMS

9.1 Perforated Cable Tray, 250mm Mtr 150

9.2 Perforated Cable Tray,75mm Mtr 350

10 EOT CRANE FOR GIS HALLS

10.1 For 220kV GIS Building(Min 06 Tonnes Capacity) Set 1

10.2 For 132kV GIS Building(Min 05 Tonnes Capacity) Set 1

11 AIR CONDITIONING SYSTEM

11.1 2 Ton Split AC with all Accessories and Stablizer (Not Less Than 5KVA) No. 6

12 ILLUMINATION SYSTEM FOR GIS HALLS AND SWITCHYARD(LED TYPE)

12.1 Illumination System for GIS Halls LS 2

12.2 Illumination System for Relay and Protection Panel Rooms LS 1

Total for 01 no. 220/132kV GIS ICT Bay at 400kV GIS S/S Sector-148, Noida (without GST)

Total for 01 no. 220/132kV GIS ICT Bay at 400kV GIS S/S Sector-148, Noida (with GST)

1- Bidder is required to quote prices in this Schedule for all the individual items/sub-items.

2- Please confirm that the prices are after taking into account ITC benefits. As per section 171 of CGST act 2017, " any reduction in rate of tax any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensureate reduction of prices. Hence supplier/ manufacture to ensure to passe the benefit of reduced prices to UPPTCL. Further prices quoted by supplier/manufacturer is subject to scrutiny under above section."

3- Evaluation of Tender shall be made after loading 18% GST (present rate) on all items including supply, erection, Testing & commissioning and civil work asuming the work as Work Contract.

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction and commissioning of 01 no. 220/132kV GIS ICT Bay at 400kV GIS S/S Sector-148, Noida

Tender Specification No. : ESD-8/241

SCHEDULE OF QUANTITIES AND PRICES FOR 02 NO. 132KV GIS LINE BAYS (Outdoor) AT 400KV GIS SUBSTATION Agra South

HANDLING, ERECTION, TESTING AND COMMISSIONING CHARGES

(All Prices are in Rupees)

Sl. No. EQUIPMENT / ITEM (Complete with all fittings, accessories, associated equipments etc. as specified in Technical Specifications) Unit Qty Unit Handling, Erection,Testing & Commissioning Charges without GST Total Handling, Erection,Testing & Commissioning Charges without GST (4x5)

POWER TRANSFORMER AND PROTECTIVE EQUIPMENTS

220/132 KV 160 MVA T/F with all accessories. Job 1

198 KV Polymer Type Surge Arrestor No.

120 KV Polymer Type Surge Arrestor No.

245 KV Post Insulator No.

145KV, 6KN Bus Post Insulator No.

Transformer (HV Side of 160 MVA, 220/132 KV) Bay Module as per 400 KV S/S TS Set

220 KV Bus Bars as per 400 KV S/s TS Set

220 KV GI Bus Ducts(3-ph) as per 400 KV S/s TS Mtr

Bus Bar extension for connecting new 245 KV GIS bays with existing Bus Bar Set

220 kV Bus Bar Extension including adaptor Module Integration No.

Suitable SF6/Air Bushing for Connecting with Bus Duct with All Fittings and Accessories No.

Transformer (LV Side of 160 MVA, 220/132 KV) Bay Module as per 400 KV S/S TS Set

132 KV Bus Bar Extension including adaptor Module Integration required for connecting new 145 KV GIS Bays with existing Bus Bar No.

POWER CABLE AND CABLE TERMINATION

132 KV 1-Core 630 sqmm XLPE Copper Power Cable (Armoured) Mtr

145 KV Termination Kit for 1x630 sqmm XLPE Copper Cable (Outdoor Type) Set

145 KV Termination Kit for 1x630 sqmm XLPE Copper Cable (GIS End) Set

Cable Route Marker No.

Terminal Connector for Termination Kit No.

Twin Moose Spacer No.

Control and Relay Panel and SCADA

220 kV T/F Control Panel for 160 MVA T/F (as per technical specifications of SAS issued by UPPTCL) with integration with existing SAS No.

220 kV T/F Protection Panel for 160 MVA T/F (as per technical specifications of SAS issued by UPPTCL) with integration with existing SAS) No.

1.1 KV Armoured Aluminium Power Cable

1.1 KV Armoured Copper Control Cable

GROUDING AND EARTHING SYSTEM

40mm MS Rod for Main Earthmat MT

40mm dia MS Electrodes of 3mtr length km

75x12 MS Flat Mtr

50x6mm MS Flat Mtr

25x6mm MS Flat Mtr

50x6mm Copper Flat (For GIS Earthing) Mtr

75X12mm Copper Flat (For GIS Earthing) Mtr

GALVANISED STRUCTURE

Lattice Type Main and Auxiliary Structure MT

ERW Pipe Type Structure MT

CABLE SUPPORTING ITEMS

Perforated Cable Tray, 250mm Mtr

Perforated Cable Tray,75mm Mtr

EOT CRANE FOR GIS HALLS

For 220kV GIS Building(Min 06 Tonnes Capacity) Set

For 132kV GIS Building(Min 05 Tonnes Capacity) Set

AIR CONDITIONING SYSTEM

2 Ton Split AC with all Accessories and Stablizer (Not Less Than 5KVA) No.

ILLUMINATION SYSTEM FOR GIS HALLS AND SWITCHYARD(LED TYPE)

Illumination System for GIS Halls LS

Illumination System for Relay and Protection Panel Rooms LS

Total for 01 no. 220/132kV GIS ICT Bay at 400kV GIS S/S Sector-148, Noida (without GST)

Total for 01 no. 220/132kV GIS ICT Bay at 400kV GIS S/S Sector-148, Noida (with GST)

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction and commissioning of 01 no. 220/132kV GIS ICT Bay at 400kV GIS S/S Sector-148, Noida

Tender Specification No. : ESD-8/241

SCHEDULE OF QUANTITIES AND PRICES FOR 02 NO. 132KV GIS LINE BAYS (Outdoor) AT 400KV GIS SUBSTATION AGRA SOUTH

MANDATORY SPARS

( All Prices are in Rupees )

Sl. No. EQUIPMENT / ITEM (Complete with all fittings, accessories, associated equipments etc. as specified in Technical Specifications) Unit Qty. Quoted Unit prices in Rs. (Exclusive of GST and other duties & taxes) Total FOR Destination Prices without GST (4x8)

Unit Ex-Works Prices Unit Pkg, Fwdg, Charges Unit Freight & Insurance charges Total unit rate without GST (5+6+7)

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

SCHEDULE OF QUANTITIES AND PRICES FOR 02 NO. 132KV GIS LINE BAYS (Outdoor) at 400KV GIS SUBSTATION Agra South

Sl. No. Item Description Quantity Units Unit Rate Total Amount in RS.

1 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 400 sqm

2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil. 300 Cum

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 400 Cum

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 350 Cum

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil 150 Cum

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 3 Cum

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 30 Cum

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)2 155 Cum

Arranging and spreding 75 mm thick broken grit 20 mm (Granite stone) uniform for turfing over 100mm thick base course of C.C. In 1:4:8 (1cement:4coarse sand: 8, 40mm stone ballast) top finish by brooming of cement mortar 1:4(1cement: 4 Coarse sand) including supply of all materials, labour and tools and plants etc. required for proper completion. 810 sqm

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 2 Cum

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 1 Cum

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete 200 Sqm

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 120 Sqm

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform 30 Sqm

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts 320 Sqm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 13000 Kg

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 200 Kg

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 1 Cum

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 10 Cum

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 550 Kg

Steel work welded in bvuilt up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete 100 Kg

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 486 Kg

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 30 Sqm

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 50 Sqm

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 20 Sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 40 Sqm

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 1 Cum

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar 2 Cum

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 40 Cum

Supply of 28 mm. dia M.S. Anchor bolts (conforming to IS 266) 900 mm. long with base plate (75x75x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work 16 NO

Fixing and grouting 28 mm and above dia bolts in proper alignment level and setout with help of a template complete including supply of all labour & T&P etc. required for proper completion of the work.(labour rates only) . 48 NO

Supply of 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mm long with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work. 218 No

Fixing and grouting 25 mm and below dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) . 218 No

Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) . 100 Rmt

Fixing of template in position level and alignment for grouting of Anchor bolt in main gantry (labour rate only). 2 Rmt

Fixing of template in position level and alignment for grouting of Anchor bolt in auxiliary structure. (labour rate only). 35 No

Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only). 80 No

Fabrication of template for auxiliary foundation including cost of all labour, and T&P etc. required for proper completion of the work. Steel shall be arranged by contractor free of cost. This template shall be property of contractor.(Labour rate only). 5 No

Supply of 56 mm. dia M.S. Anchor bolts (conforming to IS 266,density 8 T/Cum) 1700 mm. long with base plate (100x100x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work. 32 No

Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. 99.4 Rmt

Painting letters & number over cable trench cover or other places with the help of stencils including painting of base of 150 mm. dia of one coat of primer and two coats of superior quality synthetic enamel paint size of letter to be 60 mm. x 10 mm. including cost of all materials labour and T&P etc. required for proper completion of the work including placing of Trench covers in required position 100 No.

Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. 101 No

Providing and fixing of 150 mm dia PVC pipe of 6 Kg/sqcm with special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. 8.1 RM

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Bidder:

Tender Specification No. : ESD-8/241

Construction and commissioning of 01 no. 132kV GIS Feeder Bay (Outdoor) at 400KV GIS Substation Agra South.

SI. No. Description Amount (in Rs.)

1 Total Price for Supply of Equipments and Material [Schedule-1 ]

2 Total Handling, Erection, Testing & Commissioning Charges [Schedule-2]

3 Total Price for Supply of Mandatory Spares [Schedule-3 ] -

4 Total Charges for Civil works including supply of materials [Schedule-4]

5 Summary of Total Price (1+2+3+4)